 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| T-1 (3mm) SOLID STATE LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP7104RWC/A WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. Features LOW POWER CONSUMPTION. POPULAR T-1 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 1. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K. COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY: 7.6 lm/W(TYP.) COLOR REPRODUCTION INDEX:80. RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications Marker lights Furniture lighting Outdoor displays Optical indicators Signal and symbol luminaire Marker lights (e.g. steps, exit ways, etc.) Lighting for special effects (e.g. starry sky) Substitute for miniature flashlight Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 1 OF 7 ERP:1101015415 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20mA Min. WP7104RWC/A WHITE (InGaN) WATER CLEAR 280 Typ. 1200 Note2 v (mlm) @ 20mA Typ. 500 Note3 Viewing Note1 Angle 21/2 34 Absolute Maximum Ratings at TA=25C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 114 5 110 -40 To +85 -40 To +100 30 100 350 120 Unit mW V C C C mA mA C/W C/W Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size 16 mm2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 Temperature coefficient of x [Typ.] IF=20mA, -10C T 100C Temperature coefficient of y [Typ.] IF=20mA, -10C T 100C Temperature coefficient of VF IF=20mA, -10C T 100C [Typ.] VF Note2 Symbol X Y Note1 Value 0.33 0.34 2.7 3.3 3.8 0.01 Unit - Note1 V Reverse Current (VR=5V) A 10-3 /C 10-3 /C TCy -0.2 TCV -2.5 mV/C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 2 OF 7 ERP:1101015415 Brightness codes luminous Intensity Iv(mcd) @ 20mA Code. Q R S T U V W X Y Z ZA ZB Min. 280 380 480 650 900 1200 1500 1800 2200 2500 2800 3300 Note1 v (mlm) @ 20mA Max. 420 550 750 1100 1500 1800 2100 2500 3000 3300 3800 4500 Typ. 250 300 350 400 500 700 900 1200 1300 1500 1800 2100 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP7104RWC/A SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 3 OF 7 ERP:1101015415 White WP7104RWC/A SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 4 OF 7 ERP:1101015415 Color Codes WP7104RWC/A SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 5 OF 7 ERP:1101015415 WP7104RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 6 OF 7 ERP:1101015415 PACKING & LABEL SPECIFICATIONS WP7104RWC/A SPEC NO: DSAG2586 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 7 OF 7 ERP:1101015415 |
Price & Availability of WP7104RWCA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |