 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GaAs Matched SP4T Switch 0.02-2 GHz Features * Internal CMOS Decoder/Driver * Low Power Consumption * Fast Switching Speed, 60 ns Typ * Very High Intercept Points SW-369 0.625 0.020 (15.88 0.5) FP-26 .015 .003 x .010 .003 Thk. 20 Places (0.38 0.08 x 0.25 0.08) (From -55C to +85C) 0.02 - 2.0 GHz 2.8 dB Max 2.4 dB Max 1.8 dB Max Common, RF1 - RF4 On 2.0:1 Max 1.6:1 Max 1.5:1 Max 1.5:1 Max 1.4:1 Max RF1 - RF4 Off 2.0:1 Max 1.6:1 Max 1.5:1 Max 1.7:1 Max Not Specified 40 dB Min 45 dB Min 50 dB Min Guaranteed Specifications1 Frequency Range Insertion Loss 0.02 - 2.0 GHz 0.02 - 1.0 GHz 0.02 - 0.5 GHz RF1 RF RF4 0.625 0.020 (15.88 0.5) RF2 RF3 0.270 (6.86) Min Typ. 0.450 (11.43) REF Pin #1 VSWR 0.2 - 2.0 GHz 0.2 - 1.0 GHz 0.2 - 0.5 GHz 0.1 - 0.2 GHz 0.02 - 0.1 GHz Isolation 0.02 - 2.0 GHz 0.02 - 1.0 GHz 0.02 - 0.5 GHz PIN #11 0.050 TYP (1.27) 0.088 (2.24) 0.150 (3.81) Max 0.070 (1.78) Bottom of case is AC ground. Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = 0.010 (.xx = 0.25) .xx = 0.02 (.x = 0.5) Operating Characteristics Impedance Switching Characteristics Trise,Tfall (10% to 90% RF) Ton, Toff (50% CTL to 90/10% RF) Transients (in band) Input Power for 1 dB Compression 0.5 - 2.0 GHz 0.05 GHz 50 Ohms Nominal 8 ns Typ 60 ns Typ 50 mV Typ +23 dBm Typ +17 dBm Typ Intermodulation Intercept Point (for two-tone input power up to +5 dBm) Intercept Points IP2 IP3 0.5 - 2.0 GHz +72 +44 dBm Typ 0.05 GHz +50 +40 dBm Typ Bias Power +5 VDC @ 2 mA Max Functional Schematic (Top View) RF2 +5V CMOS2 CMOS1 RF1 Control Voltages Vin Low (0) 0.0 to 1.5 V @ 1 A Max Vin High (1) 3.5 to 5.0 V @ 1 A Max 1. All specifications apply with 50 ohm impedance to all RF ports with 0 and +5 Vdc control voltages. 2. Contact the factory for standard or custom screening requirements. RF COMMON Ordering Information Model No. SW-369 PIN Package Flatpack RF3 RF4 Specifications Subject to Change Without Notice. V2.0 s M/A-COM Inc. s 1011 Pawtucket Boulevard, Lowell, MA 01853 USA Telephone: 800-366-2266 GaAs Matched SP4T Switch SW-369 Absolute Maximum Ratings Parameter Max. Input Power 0.05 GHz 0.5 - 2.0 GHz2 Bias Voltage Control Voltage Operating Temperature Storage Temperature Absolute Maximum1 Typical Performance INSERTION LOSS vs.VS FREQUENCY INSERTION LOSS FREQUENCY 2.5 INSERTION LOSS (dB) 2.0 1.5 1.0 0.5 0.0 0.02 +27 dBm +34 dBm -0.5 to +7V -0.5 to Vcc +0.5V -55C to +125C -65C to +150C 1. Operation of this device above any one of these parameters may cause permanent damage. 2. When the RF input power is applied to the terminated port, the absolute maximum is +30 dBm. 0.5 1.0 FREQUENCY (GHz) 1.5 2.0 ISOLATION VS FREQUENCY ISOLATION vs. FREQUENCY 80 Pin Configuration Pin No. 1 2 3 4 5 6 7 8 9 10 Description RF1 GND GND GND RF Common GND GND GND GND RF4 Pin No. 11 12 13 14 15 16 17 18 19 20 Description RF2 GND GND +5VDC CMOS 2 CMOS 1 N/C GND GND RF3 ISOLATION (dB) 70 60 50 40 30 0.02 0.5 1.0 1.5 FREQUENCY (GHz) 2.0 VSWR VS FREQUENCY VSWR vs. FREQUENCY 2.0 Truth Table Control Inputs "1" = Logic High (CMOS) CMOS 1 0 1 0 1 CMOS 2 0 0 1 1 Condition of Switch RF Common to Each RF Port RF1 ON OFF OFF OFF RF2 OFF ON OFF OFF RF3 OFF OFF ON OFF RF4 OFF OFF OFF ON 1.8 VSWR 1.6 1.4 ON STATE OFF STATE 1.2 1.0 0.02 0.5 1.0 1.5 FREQUENCY (GHz) 2.0 Specifications Subject to Change Without Notice. V2.0 s M/A-COM Inc. s 1011 Pawtucket Boulevard, Lowell, MA 01853 USA Telephone: 800-366-2266 |
Price & Availability of SW-369PIN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |