Part Number Hot Search : 
MAX4138 MAX7446 SQD43N31 MM1311A 1016012 CMPD2003 LS4148 1V67602S
Product Description
Full Text Search
 

To Download SST12LP14C-QVCE-K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2.4 GHz High-Power, High-Gain Power Amplifier
SST12LP14C
SST-GP1214A2.4 GHz High Gain High Power PA
Preliminary Specifications
FEATURES:
* High Gain: - Typically 32 dB gain across 2.4~2.5 GHz over temperature 0C to +85C High linear output power: - >26 dBm P1dB - Please refer to "Absolute Maximum Stress Ratings" on page 4 - Meets 802.11g OFDM ACPR requirement up to 23 dBm - ~4% added EVM up to 20 dBm for 54 Mbps 802.11g signal - Meets 802.11b ACPR requirement up to 22.5 dBm High power-added efficiency/Low operating current for both 802.11b/g applications - ~29%/205 mA @ POUT = 23 dBm for 802.11g - ~27%/195 mA @ POUT = 22.5 dBm for 802.11b Single-pin low IREF power-up/-down control - IREF <2 mA Low idle current - ~100 mA ICQ High-speed power-up/-down - Turn on/off time (10%- 90%) <100 ns - Typical power-up/-down delay with driver delay included <200 ns * High temperature stability - ~1 dB power variation between 0C to +85C * Low shut-down current (< 0.1 A) * Excellent On-chip power detection - <+/- 0.5dB variation between 0C to +85C - <+/- 0.3dB variation Ch1 through Ch14 * 20 dB dynamic range on-chip power detection * Simple input/output matching * Packages available - 16-contact VQFN - 3mm x 3mm * All non-Pb (lead-free) devices are RoHS compliant
*
*
APPLICATIONS:
* * * * WLAN (IEEE 802.11b/g) Home RF Cordless phones 2.4 GHz ISM wireless equipment
* * *
PRODUCT DESCRIPTION
The SST12LP14C is a versatile power amplifier based on the highly-reliable InGaP/GaAs HBT technology. The SST12LP14C can be easily configured for high-power applications with good power-added efficiency (PAE) while operating over the 2.4- 2.5 GHz frequency band. It typically provides 32 dB gain with 29% PAE @ POUT = 23 dBm for 802.11g and 27% power-added efficiency @ POUT = 22.5 dBm for 802.11b. This power amplifier has excellent linearity, typically ~4% added EVM at 20 dBm output power. This is essential for 54 Mbps 802.11g operation while meeting 802.11g spectrum mask up to 23 dBm. The SST12LP14C also features easy board-level usage along with high-speed power-up/-down control through a single combined reference voltage pin. Ultra-low reference current (total IREF ~2 mA) makes the SST12LP14C controllable by an on/off switching signal directly from the baseband chip. These features coupled with low operating current make the this device ideal for the final stage power amplification in battery-powered 802.11b/g WLAN transmitter applications. This power amplifier has an excellent on-chip and singleended power detector, which features a wide range (>15 dB) with dB-wise linearization and high stability over temperature (+/-0.5 dB 0C to +85C), and over frequency (<+/-0.3 dB across Channels 1 through 14). The on-chip power detector provides a reliable solution to board-level power control. The SST12LP14C is offered in 16-contact VQFN package. See Figure 2 for pin assignments and Table 1 for pin descriptions.
(c)2007 Silicon Storage Technology, Inc. S71353-00-000 02/07 1
The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc. These specifications are subject to change without notice.
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
FUNCTIONAL BLOCKS
VCC1
NC
NC 14
16 NC RFIN RFIN NC 1 2 3
15
13 12 VCC2 11 RFOUT 10 RFOUT
Bias Circuit 4 5 VCCb 6 VREF 7 VREF 8 NC
1353 B1.1
NC
9
Det
FIGURE 1: Functional Block Diagram
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
2
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
PIN ASSIGNMENTS
VCC1
NC
NC 14
16 NC RFIN RFIN NC 1
15
13 12 VCC2
Top View
2 3 4 RF and DC GND 0 5 VCCb 6 VREF 7 VREF 8 NC
1353 16-vqfn P1.0
NC 11 RFOUT 10 RFOUT 9 Det
(contacts facing down)
FIGURE 2: Pin Assignments for 16-contact VQFN
PIN DESCRIPTIONS
TABLE 1: Pin Description
Symbol GND NC RFIN RFIN NC VCCb VREF VREF NC Det RFOUT RFOUT VCC2 NC NC NC VCC1 Pin No. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Power Supply No Connection No Connection No Connection Power Supply PWR No Connection O O O PWR No Connection Power Supply PWR PWR PWR Pin Name Ground No Connection I I Type1 Function The center pad should be connected to RF ground with several low inductance, low resistance vias Unconnected pin RF input RF input Unconnected pin Supply voltage for bias circuit 1st and 2nd stage idle current control 1st and 2nd stage idle current control Unconnected pin On-chip power detector RF output RF output Power supply, 2nd stage Unconnected pin Unconnected pin Unconnected pin Power supply, 1st stage
T1.0 1353
1. I=Input, O=Output
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
3
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
ELECTRICAL SPECIFICATIONS
The AC and DC specifications for the power amplifier interface signals. Refer to Table 2 for the DC voltage and current specifications. Refer to Figures 3 through Figure 12 for the RF performance. Absolute Maximum Stress Ratings (Applied conditions greater than those listed under "Absolute Maximum Stress Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions or conditions greater than those defined in the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.) Input power to pins 2 and 3 (PIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 dBm Average output power (POUT)1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +26 dBm Supply Voltage at pins 5, 12, and 16 (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +4.0V Reference voltage to pins 6 and 7 (VREF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +3.3V DC supply current (ICC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mA Operating Temperature (TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C Storage Temperature (TSTG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +120C Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150C Surface Mount Solder Reflow Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C for 10 seconds
1. Never measure with CW source. Pulsed single-tone source with <50% duty cycle is recommended. Exceeding the maximum rating of average output power could cause permanent damage to the device.
Operating Range
Range Industrial Ambient Temp -40C to +85C VCC 3.3V
TABLE 2: DC Electrical Characteristics
Symbol VCC ICC Supply Current for 802.11g, 23 dBm for 802.11b, 22.5 dBm ICQ IOFF VREG Idle current for 802.11g to meet EVM<4% @ 20 dBm Shut down current Reference Voltage for, with 30 resistor 2.85 205 195 100 0.1 2.95 mA mA mA A V
T2.2 1353
Parameter Supply Voltage at pins 5, 12, 16
Min. 3.0
Typ 3.3
Max. 3.6
Unit V
Test Conditions
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
4
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications TABLE 3: AC Electrical Characteristics for Configuration
Symbol FL-U POUT Parameter Frequency range Output power @ PIN = -9 dBm 11b signals @ PIN = -11 dBm 11g signals G GVAR1 GVAR2 ACPR Added EVM 2f, 3f, 4f, 5f Small signal gain Gain variation over band (2400~2485 MHz) Gain ripple over channel (20 MHz) Meet 11b spectrum mask Meet 11g OFDM 54 Mbps spectrum mask @ 20 dBm output with 11g OFDM 54 Mbps signal Harmonics at 22 dBm, without external filters 22 22 0.2 22.5 23 4 -48 22 20 31 32 0.5 dBm dBm dB dB dB dBm dBm % dBc
T3.3 1353
Min. 2400
Typ
Max. 2485
Unit MHz
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
5
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
TYPICAL PERFORMANCE CHARACTERISTICS TEST CONDITIONS: VCC = 3.3V, TA = 25C, UNLESS OTHERWISE SPECIFIED
S11 versus Frequency
0 -5 -10 -15 -20 -25 -30 0.0 0 -10 -20
S12 versus Frequency
S11 (dB)
S12 (dB)
-30 -40 -50 -60 -70 -80 0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Frequency (GHz) S21 versus Frequency
40 30 20 0 -5 -10 -15 -20 -25 -30 0.0
Frequency (GHz) S22 versus Frequency
S21 (dB)
10 0 -10 -20 -30 -40 0.0
S22 (dB)
1.0
2.0
3.0
4.0
5.0
6.0
7.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Frequency (GHz)
Frequency (GHz)
1353 SParm0.0
FIGURE 3: S-Parameters
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
6
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
TYPICAL PERFORMANCE CHARACTERISTICS TEST CONDITIONS: VCC = 3.3V, TA = 25C, 54 MBPS 802.11G OFDM SIGNAL
EVM versus Output Power
10 9 8 7 Freq=2.412 GHz Freq=2.442 GHz Freq=2.484 GHz
EVM (%)
6 5 4 3 2 1 0 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Output Power (dBm)
1353 F4.0
FIGURE 4: EVM versus Output Power
Power Gain versus Output Power
40 38 36
Power Gain (dB)
34 32 30 28 26 24 22 20 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Freq=2.412 GHz Freq=2.442 GHz Freq=2.484 GHz
Output Power (dBm)
1353 F5.0
FIGURE 5: Power Gain versus Output Power
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
7
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
Supply Current versus Output Power
220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 9 10
Supply Current (mA)
Freq=2.412 GHz Freq=2.442 GHz Freq=2.484 GHz
11
12
13
14
15
16
17
18
19
20
21
22
23
Output Power (dBm)
1353 F6.0
FIGURE 6: Total Current Consumption for 802.11g Operation versus Output Power
PAE versus Output Power
30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 9 10
Freq=2.412 GHz Freq=2.442 GHz Freq=2.484 GHz
PAE (%)
11
12
13
14
15
16
17
18
19
20
21
22
23
Output Power (dBm)
1353 F7.0
FIGURE 7: PAE versus Output Power
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
8
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
10
Freq = 2.412 GHZ
0
Freq = 2.442 GHz
-10
Freq = 2.484 GHz
Amplitude (dB)
-20 -30 -40 -50 -60 -70 2.3 5 2.4 0 2.45 2.50 2.55
1353 F8.0
Frequency (GHz)
FIGURE 8: 802.11g Spectrum Mask at 23 dBm
Detector Voltage versus Output Power
1.60 1.50 Freq=2.412 GHz @ 25 C Freq=2.442 GHz @ 25 C Freq=2.484 GHz @ 25 C Freq=2.412 GHz @ 0 C Freq=2.442 GHz @ 0 C Freq=2.484 GHz @ 0 C Freq=2.412 GHz @ 85 C Freq=2.442 GHz @ 85 C Freq=2.484 GHz @ 85 C
Detector Voltage (V)
1.40 1.30 1.20 1.10 1.00 0.90 0.80 0.70 0.60 0 1 2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Output Power (dBm)
FIGURE 9: Detector Characteristics over Temperature and over Frequency
1353 F9.0
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
9
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
Detector Voltage versus Output Power
1.60 1.50 Freq=2.412 GHz (Matched) Freq=2.442 GHz (Matched) Freq=2.484 GHz (Matched) Freq=2.412 GHz (Min) Freq=2.442 GHz (Min) Freq=2.484 GHz (Min) Freq=2.412 GHz (Max) Freq=2.442 GHz (Max) Freq=2.484 GHz (Max)
Detector Voltage (V)
1.40 1.30 1.20 1.10 1.00 0.90 0.80 0.70 0.60 0 1 2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Output Power (dBm)
1353 F10.0
FIGURE 10: Detector Characteristics over Frequency with 2:1 Output VSWR All Phases
10 0 -10 -20 -30 -40 -50 -60 -70 -80 2.35 2.40 2.45 2.50 2.55
1353 F11.0
Freq = 2.412 GHz Freq = 2.442 GHz Freq = 2.484 GHz
Amplitude (dB)
Frequency (GHz)
FIGURE 11: 802.11b Spectrum Mast at 22.5 dBm
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
10
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
Supply Current versus Output Power
220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 9 10
Supply Current (mA)
Freq=2.412 GHz Freq=2.442 GHz Freq=2.484 GHz
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Output Power (dBm)
1353 F12.0
FIGURE 12: Total Current Consumption for 802.11b Operation versus Output Power
10 F Vcc
0.1 F 100 pF
16 1 2 3
15
14
13 12 11 10
12 nH / 0603
47 pF 50 RFin
50 /110 mil
50 / 140 mil
47 pF RFOUT 50
1.2 pF
2.0 pF
Bias Circuit 4 5 6 7 8
10 pF 0.1 F 100 pF R1 = 30 Det
9
Suggested operation conditions: 1. VCC = 3.3V 2. Center slug to RF ground 3. VREG=2.85V with R1=30
VREG
1353 Schematic 1.1
FIGURE 13: Typical Schematic for High-Power/High-Efficiency 802.11b/g Applications
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
11
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
PRODUCT ORDERING INFORMATION
SST12LP SSTXXLP 14C - QVC XXX - XXX E X Environmental Attribute E1 = non-Pb contact (lead) finish Package Modifier C = 16 contact Package Type QV = VQFN Version Product Family Identifier Product Type P = Power Amplifier Voltage L = 3.0-3.6V Frequency of Operation 2 = 2.4 GHz Product Line 1 = SST Communications
1. Environmental suffix "E" denotes non-Pb solder. SST non-Pb solder devices are "RoHS Compliant".
Valid combinations for SST12LP14C SST12LP14C-QVCE SST12LP14C Evaluation Kits SST12LP14C-QVCE-K
Note: Valid combinations are those products in mass production or will be in mass production. Consult your SST sales representative to confirm availability of valid combinations and to determine availability of new combinations.
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
12
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
PACKAGING DIAGRAMS
TOP VIEW
SIDE VIEW
0.2
BOTTOM VIEW
See notes 2 and 3 Pin #1 1.7
Pin #1
3.00 0.075
1.7 0.075 0.5 BSC
3.00 0.075
0.05 Max 1.00 0.80 0.30 0.18
0.45 0.35
1mm
Note: 1. Complies with JEDEC JEP95 MO-220J, variant VEED-4 except external paddle nominal dimensions. 2. From the bottom view, the pin #1 indicator may be either a 45-degree chamfer or a half-circle notch. 3. The external paddle is electrically connected to the die back-side and possibly to certain VSS leads. This paddle can be soldered to the PC board; it is suggested to connect this paddle to the VSS of the unit. Connection of this paddle to any other voltage potential can result in shorts and/or electrical malfunction of the device. 4. Untoleranced dimensions are nominal target dimensions. 5. All linear dimensions are in millimeters (max/min).
16-vqfn-3x3-QVC-2.0
FIGURE 14: 16-contact Very-thin Quad Flat No-lead (VQFN) SST Package Code: QVC TABLE 4: Revision History
Revision 00 Description Date Feb 2007
*
Initial release of data sheet
(c)2007 Silicon Storage Technology, Inc.
S71353-00-000
02/07
13
2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14C
Preliminary Specifications
CONTACT INFORMATION Marketing
SST Communications Corp. 5340 Alla Road, Ste. 210 Los Angeles, CA 90066 Tel: 310-577-3600 Fax: 310-577-3605
Sales and Marketing Offices
NORTH AMERICA Silicon Storage Technology, Inc. Les Crowder Technical Sales Support - North America Tel: 949-495-6437 Fax: 949-495-6364 E-mail: lcrowder@sst.com ASIA PACIFIC NORTH SST Macao H. H. Chang Senior Director, Sales Room N, 6th Floor, Macao Finance Center, No. 202A-246, Rua de Pequim, Macau Tel: (853) 706-022 Fax: (853) 706-023 E-mail: hchang@sst.com ASIA PACIFIC SOUTH SST Communications Co. Sunny Tzeng Country Manager 16F-6, No. 75, Sec.1, Sintai 5th Rd Sijhih City, Taipei County 22101, Taiwan, R.O.C. Tel: +886-2-8698-1168 Fax: +886-2-8698-1169 E-mail: stzeng@sst.com KOREA SST Korea Charlie Shin Country Manager Rm# 1101 DonGu Root Bldg, 16-2 Sunae-Dong, Bundang-Gu, Sungnam, Kyunggi-Do Korea, 463-020 Tel: (82) 31-715-9138 Fax: (82) 31-715-9137 Email: cshin@sst.com
EUROPE Silicon Storage Technology Ltd. Ralph Thomson Director, Field Applications Engineering Mark House 9-11 Queens Road Hersham KT12 5LU UK Tel: +44 (0) 1869 321 431 Cell: +44 (0) 7787 508 919 E-mail: rthomson@sst.com JAPAN SST Japan Kiyomi Akaba Country Manager 9F Toshin-Tameike Bldg, 1-1-14 Akasaka, Minato-ku, Tokyo, Japan 107-0052 Tel: (81) 3-5575-5515 Fax: (81) 3-5575-5516 Email: kakaba@sst.com
Silicon Storage Technology, Inc. * 1171 Sonora Court * Sunnyvale, CA 94086 * Telephone 408-735-9110 * Fax 408-735-9036 www.SuperFlash.com or www.sst.com
(c)2007 Silicon Storage Technology, Inc. S71353-00-000 02/07
14


▲Up To Search▲   

 
Price & Availability of SST12LP14C-QVCE-K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X