|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SF1086A * * * * * * Designed for GSM BTS Transmitter IF Applications Low Insertion Loss Excellent Size-to-Performance Ratio Hermetic 13.3 x 6.5 mm Surface-Mount Case Unbalanced Input and Output Pb Complies with Directive 2002/95/EC (RoHS) 125 MHz SAW Filter Value +10 30 -40 to +85 260C for 30 s Units dBm VDC C Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile SM13365-12 Electrical Characteristics Characteristic Nominal Center Frequency Passband Insertion Loss at fc 1 dB Passband Amplitude Ripple over fc150 kHz Group Delay Variation over fc 150 kHz Absolute Group Delay Rejection fc-0.6 to fc-0.4 and fc+0.4 to fc+0.6 MHz fc-1.2 to fc-0.6 and fc+0.6 to fc+1.2 MHz fc-1.8 to fc-1.2 and fc+1.2 to fc+1.8 MHz fc-3.4 to fc-1.8 and fc+1.8 to fc+3.4 MHz fc-9.5 to fc-3.4 and fc+3.4 to fc+9.5 MHz fc-13 to fc-9.5 and fc+9.5 to fc+13 MHz DC to fc-13 and fc+13 to 450 MHz Except Spurious Rejection near 1.6, 1.8, and 2.0 x fc Sym fC IL BW1 GDV GD Notes 1 1, 2 Min Typ 125.000 6 205 Max 8.0 1.25 Units MHz dB kHz nsP-P s dB 150 <100 0.7 1, 2, 3 2 8 20 25 30 43 55 50 23 37 47 65 >60 1.2 150 1.7 Operating Temperature Range Impedance Matching to 50 unbalanced Case Style Lid Symbolization (YY = year, WW = week) TA 1 -10 External L-C +85 C SM13365-12 13.3 x 6.5 mm Nominal Footprint RFM SF1086A YYWW Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 W and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Electrostatic Sensitive Device. Observe precautions for handling. Electrical Connections Connection Port 1 Hot Port 1 Gnd Return Port 2 Hot Port 2 Gnd Return Case Ground Terminals 11 12 5 6 All others RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1086A-121504 Page 1 of 3 125 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1086A-121504 Page 2 of 3 125 MHz SAW Filter SM13365-12 Case 12-Terminal Ceramic Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint Case Dimensions Dimension A B C D E H P Min 13.08 6.27 mm Nom 13.31 6.50 1.91 1.50 0.79 1.0 2.54 Max 13.60 6.80 2.00 Min 0.515 0.247 Inches Nom 0.524 0.256 0.075 0.059 0.031 0.039 0.100 Max 0.535 0.268 0.079 Materials Solder Pad Termination Lid Body Pb Free Au plating 30 - 60 inches (76.2-152 m) over 80200 inches (203-508 m) Ni. Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 inches Thick Al2O3 Ceramic Port 1 Port 2 Electrical Connections Connection Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 2 3 8 9 All others Return is ground Return is hot B 3 2 C H 2 3 D 4 1 1 4 P (8 Places) 5 A 6 12 12 5 11 11 6 E (10 Places) 7 10 10 7 8 9 9 8 TOP VIEW BOTTOM VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1086A-121504 Page 3 of 3 BILL OF MATERIALS PART IDENTIFIER SF1086A-DEMO SF1086A-000 400-0735-001 400-0533-001 500-0003-330 500-0248-001 500-0010-221 500-0010-271 500-0010-270 500-0010-330 DESCRIPTION 1 DEMO BOARD,SF1086A ASSY DIAGRAM,DEMO BOARD, PCB,DEMO BOARD,13.3 X 6.5 SHIELD,TO-39 TEST FIXTURE CAP,CHIP,NPO,33(J),STD CONN,COAX,FLANGE MT.JACK IND,CHIP,1008CS,220NH,10% IND,CHIP,1008CS,270NH,10% IND,CHIP,1008CS,27NH,10% IND,CHIP,1008CS,33NH,10% DESCRIPTION 2 QTY/ASSY REFERENCE DESCRIPTION SF1086A 4 HOLE 0 1.0000 1.0000 2.0000 2.0000 1.0000 1.0000 1.0000 1.0000 PCB SHLD1 C 1,2 J 1,2 L1 L2 L3 L4 SIZE FSCM NO. DWG NO. A SCALE 2U874 6713 REV SF1086A-DEMO A SHEET NONE W/O or ECN 1 OF 2 REV HISTORY REV A ECN 6713 DATE 05/08/98 INITIAL RELEASE DESCRIPTION SIZE FSCM NO. DWG NO. A SCALE 2U874 6713 REV SF1086A-DEMO A SHEET NONE W/O or ECN 2 OF 2 |
Price & Availability of SF1086A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |