View S4804CBI41_1303873.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Part Number - S4804CBI41 Product Brief Version 2.0 - January 2002
RHINE
Features
PRODUCT BRIEF
OC-48 / 4xOC-12 / 16xOC-3 SONET/SDH FRAMER AND POS/ATM MAPPER
The S4804 is a highly-integrated VLSI device that provides full-duplex mapping of packets or ATM cells to SONET/SDH payloads. It provides support for both uni-directional and bi-directional rings. The S4804 provides full section, line, and path overhead processing, and supports framing, scrambling/descrambling, alarm signal insertion/detection, and bit-interleaved parity (B1/B2/B3) processing. The S4804 is SONET/SDH standards compliant with Bellcore GR-253, ITU G.707, ITU-T 432.1, ANSI T1.105 -1995, and IETF RFCs 1619/1661/1662/2615. A general purpose 8-bit or 16-bit microprocessor interface is provided for control and monitoring. The interface supports both IntelTM and MotorolaTM type microprocessors, and is capable of operating in either an interrupt-driven or polled-mode configuration. In addition, a standard 5 signal IEEE 1149.1 JTAG Test Port is provided for Boundary Scan test purposes.
* Provides a SONET/SDH STS-48/STM-16, 4 STS-12/STM4, or 16 STS-3/STM-1 line interfaces. * STS-48/STM-16 data stream supports a single STS-48c/ AU-4-16c, or any valid combination of STS-12c/AU-4-4c and/or STS-3c/AU-4 SONET/SDH payloads. * Each STS-12/STM-4 data stream supports a single STS12c/AU-4-4c or 4 STS-3c/AU-4 SONET/SDH payloads. * Each STS-3/STM-1 data stream supports a single STS-3c/AU-4 SONET/SDH payload. * Supports mixed STS-3 / STS-12 line rates * Provides full-duplex mapping of ATM cells or packets in each payload tributary. * Supports termination of mixed ATM and POS tributaries. * Terminates/generates SONET/SDH section, line, and path layers with transport/section E1, E2, F1, and DCC overhead interfaces in both transmit and receive directions. * APS port to support protection-switching configurations between two RHINE devices. * 16-bit, bus interface at 155 MHz for STS-48/STM-16 mode, or serial interfaces operating at 622/155 MHz for STS-12/3 (STM-4/1) modes on the line side. * 32-bit, parallel interface (FlexBus-3TM) operating at 100 MHz on the system side. * .25 micron, 2.5V core, and 3.3V tolerant I/O. * Packaged in a 624 Pin CBGA.
Applications
* * * * ATM switches Packet over SONET Routers and Switches SONET/SDH Add Drop Multiplexers, Terminal Multiplexers, and Digital Cross Connects Test equipment
S4804CBI Block Diagram
APS_DAT_IN[0:31] APS_CLK_IN[3:0] TX_TOH_FRAME TX_RING_DATA SYNCMODE RSTB INTB D[15:0] ADDR[13:0] CSN WRB(RWB) RDB(DSB) RDYB(DTACKB) BUSMODE APS_INTB TX_TOH_DAT TX_TOH_CLK
UPCLK
TX_ERR[1:4] TX_EOP[1:4] TX_LBYTE[1:0] TX_SYS_DAT[31:0] TX_ADR[4:0] TX_CLK[1:4] TX_PRTY[1:4] TX_ENB[1:4] TX_SOC/P[1:4] TX_CLAV_PDA[1:4] TX_CLK_OUT[1:4] RX_SYS_DAT[31:0] RX_ADR[4:0] RX_CLK[1:4] RX_PRTY[1:4] RX_ENB[1:4] RX_SOC/P[1:4] RX_CLAV_PDA[1:4] RX_DV[1:4] RX_LBYTE[1:0] RX_EOP[1:4] RX_ERR[1:4] RX_CLK_OUT[1:4} Production Release Information - The information contained in this document is about a product in its fully tested and characterized phase. All features described herein are supported. Contact AMCC for updates to this document and the latest product status.
TX_SONETCLK_OUT_155_622
TX
TOH INSERT SPE/VC GEN.
MICROPROCESSOR I/F TX ATM/HDLC x16 PROC w/ (X43 + 1) SCRMBL POH MON.
x16
x16
LINE SIDE INTERFACE
TX_SONETCLK_OUT_155 TX_DATA[15:0] TX_SONETCLK_IN TX_FRAME_IN RX_DATA[15:0] RX_SONETCLK[1:16] RX_LOSEXT[1:16] RX_REF_CLK_OUT
FRAMER x16
x16
RX FRAMER x16
TOH MON. x16 Ptr Proc
x16
RX ATM/HDLC x16 PROC w/ (X43 + 1) DeSCRMBL RX ATM/ HDLC CNTRS x16
Ptr Intrp
x16
TOH EXTRACT
GPIO/LED REG
JTAG PORT
RX FIFO x16 TRTSB TS_EN
APS_DAT_OUT[0:31]
RX_TOH_DAT
RX_TOH_CLK
APS_CLK_OUT
RX_RING_DATA
TDO
RX_TOH_FRAME
RX_ALARM_OUT[1:16]
AMCC
GPIO[7:0]
TDI TCK TMS
UTOPIA-3 or FlexBusTM INTERFACE
TX FIFO
S4804CBI41: RHINE
Product Brief Version 2.0 - January 2002
STS-48 POS/ATM SONET MAPPER
Overview and Applications
Sonet/SDH Processing
The S4804 implements SONET/SDH processing and fullduplex ATM/packet-mapping functions for STS-48/STM-16, STS-12/STM-4, or STS-3/STM-1 data streams. It can support either a single STS-48c/AU-4-16c or any valid combination of STS-12c/AU-4-4c or STS-3c/AU-4 signals within an STS-48/ STM-16. The S4804 also supports 4 STS-12/STM-4 signals (each containing a single STS-12c/AU-4-4c or 4 STS-3c/AU4), or 16 STS-3c/STM-1 signals each containing an STS-3c/ AU-4. A TOH/SOH interface provides direct add/drop capability for E1, E2, F1, and both Section and Line DCC channels. The S4804 also includes a clear channel mode that enables the direct transmission of system payload from the system interface to the line-side interface. On the transmit side, the S4804 generates section, line, and path overhead. It performs framing pattern insertion (A1, A2), scrambling, alarm-signal insertion, and generates section, line, and path Bit Interleaved Parity (B1/B2/B3) for far-end performance monitoring. On the receive side, the S4804 processes section, line, and path overhead. It performs framing (A1, A2), descrambling, alarm detection, pointer processing, Bit Interleaved Parity monitoring (B1/B2/B3), and error-count accumulation for performance monitoring.
PRODUCT BRIEF
HDLC Processing
When configured for POS mode, the S4804's HDLC processor(s) provides HDLC packet processing as defined by IETF RFCs 1619, 1662 and 2615. In addition, the S4804 optionally performs scrambling (X43+1).
Direct Map Mode
Direct Map Mode allows to map any protocol directly into the Sonet/SDH Synchronous Payload Envelope, by-passing the ATM and HDLC processing circuitry.
Automatic Protection Switching
The S4804 provides APS input and output interfaces to convey signals between two S4804 devices configured for APS operation. This configuration supports both 1+1 and 1:1 configurations.
Line-side Interface
On the line side, the S4804 supports a 16-bit parallel interface, operating at 155MHz for a single OC-48 optical interface. It provides serial interfaces at either 622 MHz or 155 MHz for OC-12 and/or OC-3 optical interfaces. Mixed OC-3 / OC-12 line rates are supported.
System Interface
The S4804 supports a 32-bit, 100-MHz system interface. For ATM cell transfers, the S4804 supports Utopia Level 3 interface. For packet transfers, the S4804 supports FlexBusTM interface. The S4804 also provides support for a quad, 8-bit extension of the Utopia 3.
ATM Processing
When configured for ATM cell processing, the S4804's transmit ATM processor(s) will perform all necessary cell processing as defined by ATM UNI3.1, ITU-T I.432.1, and I.432.2.
TYPICAL APPLICATIONS: S4804CBI - RHINE in ATM or POS System
Microprocessor Control 14 Reference Clock Control Addr Data 16
Single STS-48 / Quad STS-12/ 16xSTS-3 POS or ATM over SONET Application
IP Router or ATM Switch TX_SONETCLK_IN TX_DATA[15:0] P/S & S/P SONET XCVR RX_LOSEXT[1] with Clk Recovery RX_SONETCLK[2] RX_DATA[15:0]
SONET Line Side Interface
SerTxD Fiber Optic Transceiver SerRxD HP / Lucent Either Single OC-48 or Four OC-12 or Sixteen OC-3
AMCC
RHINE S4804CBI
TX_CLK TX_SYS_DAT[31:0] RX_SYS_DAT[31:0] RX_CLK
Multi Channel Link Layer Device
Switching/ Routing Logic
For OC-48 Mode: AMCC 3055 TOH Insertion and Extraction
AMCC 200 Minuteman Road, Andover, MA 01810 Ph: (978) 623-0009 Fax: (978) 623-0024

▲Up To Search▲

Price & Availability of S4804CBI41

	To Download S4804CBI41 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .