 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RPI-392 Photointerrupter, General type External dimensions (Unit : mm) 14.6 3 Thrugh hole Absolute maximum ratings (Ta=25C) Parameter Input (LED) Forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Operating temperature Storage temperature Soldering temperture 1mm from the body bottom. 13.6 10.4 Symbol IF VR PD VCEO VECO IC PC Topr Tstg Tsol Limits 50 5 80 30 4.5 30 80 -25 to +85 -40 to +85 260/3 Unit mA V mW V V mA mW Applications 6 2.8 6 Printers Facsimiles AV equipment 0.5 2-0.9 4-0.8 3.3 4 .7 -0 C (photo- ) transistor Gap Output Features +0.2 0 5.3 C C C/sec 10 7 (1.5) 1) With a hook. 2) Gap 4mm. Optical axis center 1 3.50.5 Electrical and optical characteristics (Ta=25C) Parameter Infrared Output Input light Transfer Photo charac- charactransistor emitter characteristics teristics teristics diode Forward voltage Reverse current Dark current Peak sensitivity wavelength Collector current Collector-emitter saturation voltage Response time Symbol VF IR ICEO Min. - - - - 0.5 - - - - - - - Typ. 1.3 - - 800 - 0.1 10 10 1 950 10 800 Max. 1.6 10 0.5 - - 0.5 - - - - - - Unit V A A nm mA V s s MHz nm s C-0.1 2-0.8 4-0.4 0 -0.1 Conditions IF=50mA VR=5V VCE=10V - VCE=5V, IF=20mA IF=20mA, IC=0.5mA VCC=5V, IF=20mA, RL=100 IF=50mA Non-coherent Infrared light emitting diode used. 3 1.7 +0.1 0 (2) (2.1) (10.4) 0.8 (2.54) 7 4-0.45 P IC VCE(sat) tr tf fC Cathode Collector Rise time Fall time Cut-off frequency Peak light emitting wavelength Response time Maximum sensitivity wavelength P tr tf 13.60.05 Anode Emitter VCC=5V, IC=1mA, RL=100 This product is not designed to be protected against electromagnetic wave. Notes: 1. Unspecified tolerance shall be 0.2 . 2. Dimension in parenthesis are show for reference. P nm - Electrical and optical characteristics curves RELATIVE COLLECTOR CURRENT : Ic (%) 5 FORWARD CURRENT : IF (mA) 1 0.8 0.6 0.4 0.2 0 0 d 1000 FORWARD CURRENT : IF (mA) DARK CURRENT : ICEO (nA) RELATIVE TIME : tr,t f (s) 40 40 30 20 10 0 25C 0C 25C 50C 75C COLLECTOR CURRENT : IC (mA) 50 4 100 200 100 50 tf tr 20 10 tr tf RL=5k tr tf RL=2k RL=1k 3 30 10 2.4 20 2 VCE=30V VCE=20V VCE=10V 1 10 0 0.2 1 0.1 1 2 3 4 5 -20 0 20 40 60 80 100 DISTANCE : d (mm) AMBIENT TEMPERATURE : Ta (C) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE : VF (V) 1.8 0 0 10 20 30 40 50 10 20 50 100 200 500 1000 2000 25 0 25 50 75 100 FORWARD CURRENT : IF (mA) COLLECTOR CURRENT : IC (A) AMBIENT TEMPERATURE : Ta (C) Fig.1 Relative output vs. distance ( ) POWER DISSIPATION / COLLECTOR POWER DISSIPATION : PD/ PC (mW) Fig.2 Forward current falloff Fig.3 Forward current vs. forward voltage 160 Fig.7 Collector current vs. forward current 3.0 COLLECTOR CURRENT : IC (mA) Fig.8 Response time vs. collector current Fig.9 Dark current vs. ambient temperature RELATIVE COLLECTOR CURRENT : Ic (%) RELATIVE COLLECTOR OUTPUT : IC (%) Input VCC 1 0.8 0.6 0.4 0.2 0 140 120 100 80 60 40 20 0 40 20 0 20 40 60 80 100 d 100 80 60 40 20 0 PD PC 2.0 IF=25mA 20mA Input Output RL 90% 10% 15mA 1.0 10mA 5mA 0 0 Output td tr td : Delay time tf t r : Rise time (time for output current to rise from 2 4 6 8 10 0 0.5 1 1.5 2 2.5 3 20 0 20 40 60 80 100 10% to 90% of peak current) t f : Fall time (time for output current to fall from 90% DISTANCE : d (mm) AMBIENT TEMPERATURE : Ta (C) AMBIENT TEMPERATURE : Ta (C) COLLECTOR-EMITTER VOLTAGE : VCE (V) to 10% of peak current) Fig.4 Relative output vs. distance ( ) Fig.5 Power dissipation / collector power dissipation vs. ambient temperature Fig.6 Relative output vs. ambient temperature Fig.10 Output characteristics Fig.11 Response time measurement circuit Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of RPI-392
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |