 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05080 PLC03-6 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS T1/E1 & T3/E3 Line Cards ISDN U-Interface & S/T Interface xDSL Ethernet - 10/100 Base T IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 8/20s - L4, 95A(Line-Gnd) & L4, 48A(Line-Line) SO-8 FEATURES 2000 Watts Peak Power per Line (tp = 8/20s) Protects Two (2) Lines 100A (2/10s) per Bellcore GR-1089(Intra-Building) ESD Protection > 25 kilovolts Low Capacitance: < 20pF RoHS Compliant MECHANICAL CHARACTERISTICS Molded JEDEC SO-8 Weight 70 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 12mm Tape and Reel Per EIA Standard 481 Marking: Logo, Marking Code, Date Code & Pin One Defined by Dot on Top of Package PIN CONFIGURATION 8 7 6 5 1 2 3 4 05080.R7 2/07 1 www.protekdevices.com PLC03-6 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20s) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TL TSTG VALUE 2000 -55 to 150 -55 to 150 UNITS Watts C C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25C Unless Otherwise Specified MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE (See Note 3) TYPICAL CAPACITANCE (See Note 4) V WM VOLTS PLC03-6 Note Note Note Note PBA 6.0 @ 1mA V(BR) VOLTS 6.8 MAXIMUM CLAMPING VOLTAGE (See Notes 1-2) (See Fig. 2) 8/20s VC @ IPP VOLTS 20.0V @ 100.0A @ VWM ID A 25 @0V, 1 MHz CJ(SD) pF 16 @0V, 1 MHz CJ(SD) pF 8 1: For an 8/20s waveform, apply positive pulse to pin 1 to 8 to pin 2 or 3 (ground). 2: Measured between pin 1 or 8 to pin 2 or 3; pin 1 or 8 to pin 4 or 5. 3: Measured between I/O pins and ground (pin 1 to 2). 4: Measured between I/O pins (pins 1 to 4). 05080.R7 2/07 2 www.protekdevices.com PLC03-6 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 100 PPP - Peak Pulse Current - kilowatts 10 2000W, 8/20s Waveform 1 0.1 0.01 1 10 100 td - Pulse Duration - s 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8s td = 20s 100 80 60 40 20 0 0 5 e-t td = t I /2 PP 10 15 t - Time - s 20 25 30 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20s 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - C 150 05080.R7 2/07 3 www.protekdevices.com PLC03-6 SO-8 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-8 8 5 -B - P + 0.010 (0.25 MM) M B M 4 PL DIM A B C D F G J K P R NOTES 1. 2. 3. 4. 5. 6. PACKAGE DIMENSIONS MILLIMETERS MIN MAX 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 1 4 G D C R x 45 0 - 10 K 0.010 (0.25 MM) M T B S A S 8 PL -T- + J F 0.196 5.00 0.189 0.150 0.157 4.00 1.75 0.054 0.068 0.49 0.014 0.019 0.049 1.250 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.004 0.008 0.25 6.20 0.229 0.244 0.019 0.50 0.010 MOUNTING PAD 0.050 0.005 0.030 0.005 - T - = Seating Plane and Datum Surface. Dimensions "A" and "B" are Datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e. PLC03-6-T7.. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PLC03-6-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PLC03-6-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.160 0.005 0.245 MIN 0.045 0.005 Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05080.R7 2/07 4 |
Price & Availability of PLC03-607
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |