 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Cree(R) SMD LED Model # LP6-PWR-03-N Data Sheet 120-degree, 6.0 x 5.0 mm, SMT LED in warm white color with water-transparent lens Applications * * * * Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 3 X 50 3 x 100 5 3 x 255 -40 ~ +100 -40 ~ +100 110 3 x 300 3 x 160 Unit mA mA V mW C C C C/W C/W Junction/Solder Point 1. 2. Notes: Pulse width 0.1 msec, duty 1/10. Rth test condition: mounted on PCB FR4 (pad size 40 mm2) Typical Electrical & Optical Characteristics (TA = 25C ) Characteristics Forward Voltage Reverse Current Symbol VF IR IV V CCT x y 21/2 Condition IF = 3 x 50 mA VR = 5 V IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA deg Unit V A mcd mlm K 1800 3100 9000 3200 0.426 0.407 120 Minimum Typical 4.0 Maximum 5.1 10 D-CT162.000 Data Sheet: CL Luminous Intensity Luminous Flux Color Temperature Chromaticity Coordinates 50% Power Angle Subject to change without notice. www.cree.com/ledlamps Standard Bins for LP6-PWR-03-N (IF = 3 x 50 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LP6-PWR1-03-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 50 mA. D E F 4500 mcd Luminous Intensity (IV) Y2 3550 mcd Y1 2800 mcd X2 2240 mcd X1 1800 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y 0.3541 0.3401 0.3610 0.3900 D 0.4030 0.4250 0.3822 0.3580 0.3822 0.3580 0.4030 0.4250 E 0.4490 0.4530 0.4129 0.3725 0.4129 0.3725 0.4490 0.4530 F 0.5080 0.4720 0.4588 0.3838 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of the color coordinates is 0.01. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT62.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LP6-PWR1-03-N1 Rev. No. 05 CIE Chromaticity Diagram CIE Chromaticity Diagram 0.90 CIE 520 0.80 530 510 540 55 560 0.70 0.60 490 0.50 57 580 590 600 610 620 630 Y 0.40 E D F 0.30 480 0.20 470 0.10 46 0.00 0.00 0.10 0.20 0.30 X 0.40 0.50 0.60 0.70 0.80 4600 Silicon Drive 4/5 Format #: COTCO-D-074 Durham, NC 27703 REV.4 Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 3 CLD-CT62.000 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LP6-PWR1-03-N1 Rev. No. 05 Graphss Graph If (mA) Vr(V) -10 0 0.0 -10.0 -20.0 -30.0 -40.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0 100.0 80.0 60.0 40.0 20.0 -50 -40 -30 -20 0.0 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 Half Power WL=150nm 100% 75% 50% 25% 0% 400 500 600 700 800 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 100 80 60 40 20 0 IF(mA) 50% Power Angle : 0 Rth j-s=160 C/W Ie(%) 100% 80% 60% 40% Rth j-a=300C/W 0 20 40 60 80 20% T ( C) 100 -90 -60 -30 0 30 60 90 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.6 FAR FIELD PATTERN Items Prepared by Checked by Approved by FCN# Signatures WangFJ XieJH DavidLiu Date 2007-04-26 2007-04-26 2007-04-26 Rev.No 03 04 05 Date Revision History Change Description from 3X230 mW to 3X255 mW; Change Graphs. 2005-11-02 Change VF(avg) from 4.0V to 4.5V,VF(max) from 4.6V to 5.1V; PD 2007-01-11 Change VF(typ)4.5 to 4.0, Change Graphs. 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps FCN20070103 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT62.000 5/5 Format #: COTCO-D-074 REV.4 Document No. SPE/LP6-PWR1-03-N1 Rev. No. 05 Dimension Drawing Mechanical Dimensions All dimensions are in mm. 25C bsolute maximum Rating 3 x 50 3 x 100 5 3 x 255 -40 ~ + 100 -40 ~ + 100 +110 3 x 300 3 x 160 teristics ( Ta = 25C) Condition IF = 3 x 50mA VR = 5V RoHS Compliance Unit mA mA V mW C C C C /W C /W 2 ** Rth test condition: Mounted on PC Board FR 4(pad size>=40mm ) Min. ----- Typ. 4.0 --- Max. 5.1 10 Unit V A Notes The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the IF =threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc3 x 50mA mcd 1800 3100 --tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. IF = 3 x 50mA IF = 3 x 50mA ----- 9000 3200 ----- mlm K Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. IF = 3 x 50mA IF = 3 x 50mA ----- 0.426 0.407 120 ------- ----deg Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps --IF = 3 x 50mA 5 CLD-CT62.000 Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP6-PWR1-03-N1-00001 LP6-PWR1-03-N1-00002 Description SMD 120 Warm White, FULL RANK, Tape & Reel SMD 120 Warm White, E,F, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT62.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps |
Price & Availability of LP6-PWR1-03-N1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |