View DR-45_1233741.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TOTAL POWER INT'L
45W Single Output Industrial DIN Rail Power Supply
Features :
Universal AC input/Full range Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15
DR-45
series
Protections:Short circuit/Over load/Over voltage/Over temperature
UL 508(industrial control equipment)approved LED indicator for power on 100% full load burn-in test Fix switching frequency at 100KHz 3 years warranty
R
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT DR-4505 5V 5A 0 ~ 5A 25W DR-4512 12V 3.5A 0 ~3. 5A 42W 200mVp-p
10.8 ~ 13.2V
DR-4515 15V 2.8A 0 ~ 2.8A 42W 240mVp-p 13.5 ~ 16.5V
1.0%
1.0%
1.0%
DR-4524 24V 2A 0 ~ 2A 48W 480mVp-p 21.6 ~ 26.4V
1.0%
1.0%
1.0%
RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 LINE REGULATION
2.0%
1.0%
1.0%
85 ~ 264VAC 47~63Hz 72% 120 ~ 370VDC
1.0%
1.0%
1.0%
LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD
PROTECTION OVER VOLTAGE
800ms, 60ms, 50ms/230VAC at full load
77%
77%
80%
1.5A/115VAC 0.75A/230VAC COLD START 30A/115VAC 60A/230VAC <1mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V Tj 135
-10 ~ +50
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
Shut down o/p voltage, re-power on to recover typically (U1) Detect on heat sink of power transistor
(Refer to output load derating curve) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
OVER TEMPERATURE WORKING TEMP.
20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL508, TUV EN60950 Approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55011,EN55022 (CISPR22) Class B EMC (Note 4) Compliance to EN61000-3-2,-3 HARMONIC CURRENT
EMS IMMUNITY MTBF OTHERS
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
DIMENSION PACKING
364.6K hrs min. MIL-HDBK-217F (25 93*78*67mm (L*W*H) 0.31Kg; 48pcs/14.8Kg/1.3CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
45W Single Output Industrial DIN Rail Power Supply
Mechanical Specification
DR-45
Case No. 918A
series
Unit:mm
67 29
46.5
46.5
7.5 8.5
9 8 7 6 5 4 3 2 1
Install DIN rail TS35/7.5 or TS35/15
Terminal Pin. No Assignment
Pin No. 1 2 3 4,5 Assignment AC/L AC/N FG DC OUTPUT -V Pin No. 6,7 8 9 Assignment DC OUTPUT+V LED +V ADJ.
93
9.5
78
77
Block Diagram
fosc : 100KHz
EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT +V -V
I/P
PWM CONTROL
FG
Output Derating
Static Characteristics (24V)
Ta=25
100
32
350 300 250 200 150 100 50 70 80 100 120 140 160 180
80
OUTPUT VOLTAGE (V)
28 24 20 16 12 8
60
40
20
-10
0
10
20
30
40
50
60 (VERTICAL)
200
220
240
260
AMBIENT TEMPERATURE (
)
INPUT VOLTAGE (V) 60Hz
OUTPUT RIPPLE (mVp-p)
LOAD (%)

▲Up To Search▲

Price & Availability of DR-45

	To Download DR-45 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .