Part Number Hot Search : 
KA7805 PU4320 MTZJ2 S2000AFI 3900PF T74FS HP147TSW TSOP4833
Product Description
Full Text Search
 

To Download AT-2641 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Digital Attenuator, 4-Bit, Single Control 30 dB, 0.5-2.0 GHz
Features
* * * * Positive Single Control 2-dB Attenuation Steps to 30 dB Low DC Power Consumption TSSOP-16 Plastic Package
AT-264 V6
Functional Schematic 2,3
Vs
16
15
14
13
12 1
11
10
9
Description
M/A-COM's AT-264 is a 4-bit, 2-dB step GaAs MMIC digital attenuator in a low cost TSSOP-16 surface mount plastic package. The AT-264 is ideally suited for use where high accuracy, very low power consumption and low intermodulation products are required. Typical applications include radio, cellular, wireless LANs, GPS equipment and other gain/level control circuits.
The AT-264 is fabricated using a mature 1 micron GaAs MESFET process. The process features full chip passivation for increased performance and reliability.
16
8
4
2
1
2
3
4
5
6
7
8
Ordering Information
Part Number AT-264 AT-264TR* Package TSSOP 16-Lead Plastic Package Tape and Reel
2. Blocking caps are required on all RF ports (39 pF used for data measurements). 3. Vs = +5 0.2 VDC must be applied at RF1 or RF2 using a 10 Kohm or greater pull-up resistor.
Pin Configuration
* Reference Application Note M513 for reel size information.
Pin No.
1
Function
Ground Ground VC1 VC2 VC3 VC4 Ground Ground
Pin No.
9 10 11 12 13 14 15 16
Function
RF2 Ground Ground Ground Ground Ground Ground RF1
Absolute Maximum Ratings
Parameter
Input Power 50 MHz 500 - 2000 MHz Control Voltage Operating Temperature Storage Temperature
1
2 3
Absolute Maximum +27 dBm +34 dBm -0.5 V < VC < 8.5 V -40C to +85C -65C to +150C
4 5 6 7 8
1. Exceeding any one or combination of these limits may cause permanent damage to this device.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
Digital Attenuator, 4-Bit, Single Control 30 dB, 0.5-2.0 GHz
Electrical Specifications4: TA = 25C, Z0 = 50 , VS = 5 V
Parameter
Reference Insertion Loss Attenuation Accuracy VSWR Trise, Tfall Ton, Toff Transients 1 dB Compression IP2
AT-264 V6
Test Conditions
0.5 - 1.0 GHz 0.5 - 2.0 GHz 0.5 - 1.0 GHz 0.5 - 2.0 GHz 1.0 - 1.5 GHz 0.5 - 2.0 GHz 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In Band Input Power 0.5 GHz 0.9 GHz 0.5 GHz 0.5 - 2.0 GHz Measured Relative to Input (for two-tone Input Power up to +5 dBm) 0.5 GHz 0.5 - 2.0 GHz Measured Relative to Input (for two-tone Input Power up to +5 dBm)
Units
dB dB
Min
-- --
Typ
2.0 2.2
Max
2.4 2.6
(0.15 dB + 5% of attenuation setting in dB) dB (0.3 dB + 5% of attenuation setting in dB) dB Ratio Ratio nS nS mV dBm dBm dBm dBm dBm dBm -- -- -- -- -- -- -- -- -- -- -- 1.5:1 1.9:1 500 500 75 25 25 65 71 43 47 -- -- -- -- -- -- -- -- -- -- --
IP3
4. External DC blocking capacitors are required on all RF ports. Loss varies at 0.003 dB/C.
Truth Table
VC1 VC2 VC3 VC4
1 1 1 1 0 0 1 1 1 0 1 0 1 1 0 1 1 0 1 0 1 1 1 0
Attenuation (dB)
Reference Insertion Loss 2 4 8 16 30
Logic 0 = 0 0.2 V. Logic 1 = +5 V @ 30 A maximum current total.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
Digital Attenuator, 4-Bit, Single Control 30 dB, 0.5-2.0 GHz
Typical Performance Curves
Insertion Loss
+25C 3.5 +85C -40C
2.0 1.8
AT-264 V6
VSWR
IL 2dB 16dB 30dB
Insertion Loss (dB)
3.0 2.5 2.0 1.5 0.5 1.0 1.5 2.0 2.5 3.0
VSWR
1.6 1.4 1.2 1.0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency (GHz)
Frequency (GHz)
Attenuation
32 28 24 20 16 12 8 4 0 0.5 1.0 1.5 2.0 2.5 3.0
Attenuation Accuracy
2dB 1.5 4dB 8dB 16dB 30dB
Attenuation (dB)
Deviation From Nominal Attenuation (dB)
1.0 0.5 0.0 -0.5 -1.0 -1.5 0.5 1.0 1.5 2.0 2.5 3.0
Frequency (GHz)
Frequency (GHz)
TSSOP-16
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.


▲Up To Search▲   

 
Price & Availability of AT-2641

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X