 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 66012 FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER Mii OPTOELECTRONIC PRODUCTS DIVISION Features: * * * * DSCC Approved 8302401EX High current transfer ratio: 1000% typical 1500 Vdc isolation test voltage Low input current requirement: 0.5mA Applications: * * * * * Military and Space High reliability systems Voltage Level Shifting Isolated Receiver Input Communication systems DESCRIPTION The 66012 optocoupler contains four infrared LEDs optically coupled to four corresponding high gain photon detectors. This unique quad optocoupler provides high CTR and low leakage currents over the full military temperature range (-55 to +125C). The 66012 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature........................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................. -55C to +125C Lead Solder Temperature.........................................................................................260C for 10s (1.6mm below seating plane) Peak Forward Input Current (each channel) ............................................................................................... 20mA (1ms duration) Average Forward Input Current ............................(see Note 3) .......................................................................................... 10mA Reverse Input Voltage ...............................................................................................................................................................5V Output Current - IO (each channel) ...................................................................................................................................... 40mA Output Power Dissipation (each channel) ..............(see Note 2)........................................................................................ 50mW Supply Voltage - VCC ............................................... (see Note 1) ............................................................................... -0.5 to 20V Output Voltage - VO (each channel).....................(see Note 1)............................................................................... . -0.5 to 20V Package Dimensions .790 [20.06] .820 [20.83] 1 XXXX Mii 6N140 .320 [8.13] MAX 3 4 2 Schematic Diagram A K 14 V01 15 VCC DATE CODE A K 13 V02 PIN 1 0.170 [4.32 MAX] .020 [0.51] .290 [7.37] .310 [7.87] 7 0.20 [0.51] MAX .007 [0.18] 0.13 [0.33] 8 A K 12 V03 A K 11 V04 10 GND 6 5 0.150 [3.81] .090 [2.29] .110 [2.79] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] Notes: 1. Derate IF at 0.05 mA/C above 25C. 2. Collector output power plus one fourth of the total supply power is total output power. Derate at 0.46mW/C above 25C. 3. The lowest total IOH over temperature is developed by keeping VCC as low as possible, but greater that 2 volts. The negative voltage at the detector side should be applied to Pin 10. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 26 66012 PARAMETER Current Transfer Ratio FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER ELECTRICAL CHARACTERISTICS SYMBOL CTR Ta = -55C to 125C unless otherwise specified. MIN 300 300 200 TYP 1000 750 400 0.1 0.2 .005 .010 2 1.4 MAX UNITS % % % TEST CONDITIONS IF = 0.5mA, VO = 0.4V, VCC = 4.5V IF = 1.6mA, VO = 0.4V, VCC = 4.5V IF = 5.0mA, VO = 0.4V, VCC = 4.5V IF = 0.5mA, IOL = 1.5mA, VCC = 4.5V IF = 5.0mA, IOL = 10mA, VCC = 4.5V IF = 2A, VO = VCC = 18V IF1 =IF2 =IF3 =IF4 = 0mA, VCC = 18V IF1= IF2 = IF3 = IF4=1.6mA, VCC = 18V IF = 1.6mA IR = 10A VI--0 = 1500Vdc, Relative Humidity = 45% tA = 25C, t = 5s IF = 0.5mA, VCC = 5.0V, RL = 4.7k IF = 5mA, VCC = 5.0V, RL = 680k IF = 0.5mA, VCC = 5.0V, RL = 4.7k IF = 5mA, VCC = 5.0V, RL = 680k NOTE 1,2 1,2 1,2 1 1,3 Logic Low Output Voltage Logic High Output Current High Level Output Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level VOL IOH ICCH ICCL VF BVR II--O 5 0.4 0.4 250 40 4 1.8 1.0 V V A A mA V V A 1 1 4 tPLH tPHL 5 4 8 2 60 30 100 10 s s s s TYPICAL CHARACTERISTICS Ta = 25C, VCC = 5V Each Channel PARAMETER SYMBOL MIN TYP MAX Input Capacitance Capacitance (Input-Output) Input Diode Temperature Coefficient Resistance (Input-Output) Resistance (Input-Input) Input-Input Insulation Leakage Current Common Mode Transient immunity at High Output Level CIN CI-O vF TA UNITS pF pF mV/C TEST CONDITIONS VF = 0, f = MHz, ta = 25C f = 1MHz, ta = 25C IF = 1.6mA VI--O = 500V, ta = 25C VI--I = 500V, ta = 25C Relative Humidity = 45% VI--I = 500V, t = 5s VCM = 50V P-P ,VCC = 5.0V, RL = 1.5k, IF = OmA NOTE 1 1, 5 1 1, 5 6 6 7,9 60 1.5 -1.8 10 10 12 12 RI-0 RI-I II-I CMH 500 0.5 1000 nA V/s 8,9 Common Mode Transient Immunity CML 500 1000 V/s VCM = 50V P-P ,VCC = 5.0V, at Low Output Level RL = 1.5k, IF = 1.6mA NOTES: 1. Each channel. 2. CURRENT TRANSFER RATIO is defined as the ratio of output collector current, IO, to the forward LED input current., IF , times 100%. 3. IF = 2A for channel under test. For all other channels, IF = 10mA. 4. Device considered a two-terminal device. Pins 1-6 and 16 are shorted together and pins 7-14 are shorted together. 5. Measured between each input pair shorted together. 6. Measured between adjacent pairs shorted together, i.e. between pins 1 and 2 shorted together and pins 3 and 4 shorted together, etc. 7. CMH is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (ie. VO > @.0V). 8. CML is the maximum tolerable common mode transient to assure that the output will remain in a low logic state (ie. VO < 0.8V). 9. In applications where dv/dt may exceed 50,000 V/s (such as static discharge) a series resistor, RCC , should be included to protect the detector IC"s from destructively high surge currents. The recommended value is RCC = 1V = k 0.6IF (mA) RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage PART NUMBER 66012-001 66012-002 66012-003 66012-004 SYMBOL IFL IFH VCC MIN 0 0.5 2.0 MAX 2 5 18 UNITS A mA V SELECTION GUIDE PART DESCRIPTION DSCC Dwg 8302401EX Quad Channel Optocoupler Quad Channel optocoupler, commercial, tested over full military temperature range (-55C to +125C) Quad Channel optocoupler, commercial (0 to +70C) Quad Channel optocoupler, commercial (-40C to +85C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 28 |
Price & Availability of 66012-004
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |