View 3X8292_1199616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FRONTEND 4049 FM5
3x8168; 3X8292
TARGET SPECIFICATION ELECTRICAL DATA
1. Description:
The frontend 4049 FM5 is specially designed for multimedia applications. It includes TV as well as FM reception possibility. TV reception standard are B/G; I, D/K, L, L. The frontend includes a hyperband tuner which covers the frequency range from 45 to 865 MHz and an IF-part with SAWfilter, IF-amplifier, video- and sound demodulator. So the AF signal is available at the audio output nd terminal, the CVBS signal is available at the video output terminal. Also a 2 IF output is provided, which allows external sound demodulation for stereo and NICAM reception. A video buffer is built in which makes a direct connection to 75 inputs possible. The reception frequency range is divided in VHF low, VHF high and UHF. VHFlow part of the tuner is used for FM reception also. Complete FM signal processing including demodulation and stereo decoding is built in. Baseband signals L (left) and R (right) as well as MPX (Baseband Multiplex signal) are on pins available. Band, standard selection and tuning are done via IC-bus, completely. Also a digital AFC-function can be realized, because the AFC-voltage generated by the IF-demodulator is fed to an analogue/digital converter which is integrated in the IF demodulator-IC and readable via IC-bus. A DC/DC converter is built in. Therefore supply voltage is 5V only.
2. Mechanical Characteristics:
2.1. Dimensions: according drawing 3x8168GZ 2.2. Weight: appr. 52 g
IC bus signal SCL IC bus signal SDA Address selection for IC bus
FM sound output R FM sound output L 2nd IF Video output CVBS Supply voltage VS1 AF sound output / FM MPX
3X8168 ED November 02
Page: 1/14
8168ED01.DOC
2.3. Types Tunertype Sockettype 3x8168 IEC connectors 3X8292 Phono sockets
Socketlength Height
14.4 mm 28.55/10.25 mm
10.3 mm 28.55/10.25 mm
3. Working Data:
3.1. Reception Standard: 3. 2. Frequency Range: VHF low VHF high UHF FM Margin: VHF low VHF high UHF FM ch IA ... ch S7... ch 21 ... S6 S41 69 +0.5 MHz/-0.25 MHz +1 MHz/-6 MHz +3 MHz/-6 MHz +/- 0.5 MHz ch IA ...S6 ch S7 ...S41 ch 21 ...69 45.75 MHz 147.25 MHz 471.25 MHz 87.50 MHz ... 140.25 MHz ... 463.25 MHz ... 855.25 MHz ... 108.10 MHz B/G, I, D/K, L, L
Recommened take over frequencies: VHF low / VHF high VHF high/ UHF
Frequency referred to picture carrier.
141 MHz 464 MHz
IF: picture carrier sound carrier 1 sound carrier 2 NICAM sound carrier B, G 38.9 33.4 33.16 33.05 I 38.9 32.9 32.348 L 38.9 32.4 33.05 all frequencies in MHz Oscillator operates above received frequency. L 33.90 40.40 D/K 38.9 32.4 33.05
3X8168 ED November 02
Page: 2/14
8168ED01.DOC
3.3. Supply voltage: Supply voltage VS1 3.4. Input impedance: VHF/UHF and FM 3.5. Temperature: Operating temperature: Storage temperature: ( measured in slowly moved air ) 0 ... 60 C -25 ... 60 C 75 , unbalanced 5 V +/- 5% max. 230 mA
4. Test conditions:
If not otherwise noticed all data are hold under following conditions:
Measurement tolerance: Ambient temperature: Supply voltage:
10 % or 1 dB 25 C +/- 3 V S1 +/- 5%
5. TV Tuner Data:
5.1. VSWR: VHF low VHF high UHF
Referred to channel center frequency.
min.
typ.
max. 5.0 5.0 5.0
unit
5.2. AGC-Range: VHF low VHF high UHF FM 5.3. IF-Rejection: VHF low VHF high UHF FM 5.4. Image-Rejection: VHF low VHF high VHF high UHF FM ch S7 .... ch S20 ch S21 .... ch S41 60 60 55 50 50 dB dB dB dB dB 50 60 60 50 dB dB dB dB 40 40 35 40 dB dB dB dB
3X8168 ED November 02
Page: 3/14
8168ED01.DOC
6. TV Output parameter:
6.1. Video output:
Conditions:
Standard B/G; Ant. input level 66 dBV
min.
typ. 1 0.9 75
max.
unit Vpp Vpp
CVBS - Output level (B/G, D/K, L/L): (Standard I): Load impedance Video S/N (unweighted):
Flat Field
VHF UHF Video sensitivity (Off Air Channels)
Video S/N = 30 dB
46 47 45
dB dB dBV
Frequency response:
(sin x)/x Ref.: 0.2 MHz
1 MHz 2 MHz 3 MHz 4 MHz 4.43 MHz 5 MHz sound carrier rejection B/G I, D/K, L/L Differential gain
modulated 5 step staircase
-1.5 -2 -4 -4 -5 -12 30 26 3 5
2 3 3 4 3
dB dB dB dB dB dB dB dB %pp pp
Differential phase modulated 5 step staircase
3X8168 ED November 02
Page: 4/14
8168ED01.DOC
6.2 TV Sound output:
Pin 21 Load Output level: 6.2.1 TV FM sound Conditions:
Ant.input level 66 dBV; Video signal: color bar Audio signal 1kHz, 27 kHz deviation; 50 s preemphasis Measurements with 50 s deemphasis:
min. DC AC DC 100 10
typ.
max.
unit k k V
2.3
AF - level: THD: S/N: Frequency response: 40 Hz ... 15 kHz
(6 kHz deviation)
400 -1
540 50
680 0.5 1
mVrms % dB dB
6.2.2 TV AM sound
input level 66 dBV, video signal: color bar audio signal 1kHz AM 54% modulation
AF - level: THD: S/N:
400
500 45
600 1.0
mVrms % dB
6.3. 2nd IF output
(PC/ sound carrier SC1: 7, 10, 13 dB) (sound carrier SC2 off )
AC level of SC1 5.5, 6.0, 6.5 MHz:
400
mVpp
AC level of SC1 6.5 MHz:
400
(PC/ sound carrier: 10 dB) (L standard, without modulation)
mVpp
(PC/ sound carrier SC1: 10 dB) (PC/ sound carrier SC2: 20dB)
AC level of SC2 5.74, 6.55 MHz:
125
mVpp
Load impedance
0.5
k
3X8168 ED November 02
Page: 5/14
8168ED01.DOC
7. FM part
7.1 FM output
min. 7.1.1 Frequency range 7.1.2 Output levels
AF = 1 kHz, 75 kHz deviation
typ.
max. 108.1
unit MHz
87.5
MPX Load impedance L, R resp. Load impedance 7.1.3 Frequency response 40 Hz to 15 kHz 7.1.4 Usable sensivity 30 dB S/N 50 dB S/N
1 kHz 75 kHz deviation
AC DC AC DC
810 2.3 100 255 1.0 100 -2 5 15 65 2
mVrms V k mVrms V k dB dBV dBV dB
7.1.5 S/N at high input level
Vin = 60 dBV, Mod. = 1kHz 75 kHz deviation measured at MPX output with 50 s deemphasis
7.1.6 Distortion at high input level
22.5 kHz deviation
0.2 30 60 53 50 80
% dB dB dB dB
7.1.7 Stereo channel separation 7.1.8 AM suppression
Vin 60 dBV 75 kHz dev. AM 30%
7.1.9 Image rejection
unwanted signal 66.6 MHz above wanted signal
7.1.10 IF rejection
referred to 33.3 MHz unwanted signal
3X8168 ED November 02
Page: 6/14
8168ED01.DOC
8. IC bus
There are two different IC bus used one IC Tuner to control tuning and one IC IF to control IF 2 demodulation and baseband processing. With port P0 of control byte 2 the slave address of I C IF can be controlled.
8.1 IC Tuner
8.1.1 Write data format Address byte Divider byte 1 Divider byte 2 Control byte 1 Control byte 2 MSB 1 0 n7 1 P7 1 n14 n6 CP P6 0 n13 n5 T2 P5 0 n12 n4 T1 P4 0 n11 n3 T0 P3 MA1 n10 n2 RSA P2 MA0 n9 n1 RSB P1 LSB R/W n8 n0 OS P0 A A A A A
A = Acknowledge R/W = 0 : Write mode CP = 1 : charge pump current high T2, T1, T0 = test bits, normal operation: T2 = 0, T1 = 0, T0 = 1 RSA, RSB bits for minimum step size, see 8.1.2 OS = tuning voltage switch, normal operation: OS = 0 8.1.2 Address selection MA1 0 0 1 1 MA0 0 1 0 1 Address C0 C2 C4 C6 Voltage at Pin 11 ( 0 to 0.1 ) * VS1 (0.2 to 0.3) * VS1 or open ( 0.4 to 0.6 ) * VS1 ( 0.9 to 1 ) * VS1
8.1.3 Oscillator frequency and divider byte calculation: RSA RSB Reference divider Min. tuning step [kHz] 1 1 512 62.5 X 0 640 50.0 0 1 1024 31.25 for FM recption we recommend 50 kHz minimum step size fOSC= fD + fIF fIF = 38.9 MHz at B/G, D/K, I, L fIF = 33.9 MHz at L' fIF = 33.3 MHz at FM fOSC fD : Local oscillator frequency : Desired frequency fref [kHz] 7.8125 6.25 3.90625
fOSC = fREF * 8 * SF fREF : Crystal reference frequency / 640 = 4 MHz / 640 = 6.25 kHz, ( RSA =X, RSB = 0) SF : Programmable scaling factor Scaling factor SF= 16384* n14 + 8192 * n13 * 4096 * n12 + 2048 * n11 + 1024 * n10 + 512 * n9 + 256* n8 + 128 * n7 + 64 * n6 + 32 * n5 + 16 * n4 + 8 * n3 + 4 * n2 + 2 * n1 + n0
3X8168 ED November 02 Page: 7/14
8168ED01.DOC
8.1.4 Control byte 1 settings (default) MSB 1 LSB 0
Control byte 1
0
0
0
1
X
0
A
8.1.5 Control byte 2 (Bandselection) Band VHF low VHF high UHF FM Active port P7, P5 P7,P4 P5,P4 P7, P5, P2 MAD: MS: P7 1 1 0 1 P6 0 0 0 0 P5 1 0 1 1 P4 0 1 1 0 P3 0 0 0 0
2
P2 0 0 0 1
P1 0 0 0 MS
P0 MAD MAD MAD MAD
Programmable module address I C IF 2 0 = Slave address I C IF = 43[hex] 2 1 = Slave address I C IF = 42[hex] Forced Mono at FM mode: 0 = Stereo Mode with capability of stereo indication 1 = Forced Mono Mode
8.1.6 Read data format MSB 1 POR
R/W : POR : FL : I2, I1, I0:
Address byte Status byte
1 FL
0 I2
0 I1
0 I0
MA1 A2
MA0 A1
LSB R/W A0
A A
1 = Read mode Power on reset flag ( POR =1 at power on) In lock flag (FL= 1 when PLL is locked) Digital levels for I/O ports P2, P1 and P0 respect. In case of FM I1 = 1: Stereo indication I2, I0 not defined A2, A1, A0: FM-AFC or FM-AGC or SIF-AGC radio output detection A2 A1 A0 SIF-AGC radio output *1) FM-AGC radio output *2) 1 0 0 not defined not defined 0 1 1 > 20dBV normal signal 0 1 0 5dBV ... 20dBV weak signal 0 0 1 <5dBV very weak signal 0 0 0 not defined not defined *1) typical values, peak level detection within a bandwith of appr. 2MHz *2) only valid if FM-carrier exist and SIF-AGC radio output = (A2=0, A1=1, A0=1) *3) typical values, only valid if CARRDET = high, see section 8.3.2 FM-AFC radio output *3) -100 kHz -35 kHz Correct tuning +35 kHz +100 kHz
3X8168 ED November 02
Page: 8/14
8168ED01.DOC
8.2. IC IF
8.2.1. IC-bus sequence write Start Slave addr.
Start Slave addr R/W Subaddress
R/W =0
Ack
subaddress
Ack
data
Ack
Stop
Ack Stop
start condition. Slave address (7bit) = 42[hex] or 43[hex] in respect of MAD. Read/Write bit: 0 = write to component; 1 = master reads from component. byte which indicates register of component which the are data for. "switching register" 00[hex] "adjust register" 01[hex] "data register" 02[hex] acknowledge generated by the component stop condition
If more than one byte of data is transmitted, then auto-increment of subaddress is performed. i.e. transmit 3 bytes starting with data for switch register mode B/G I D/K L L FM - AFC FM - AGC SIF - AGC FM - AFC stereo FM - AGC stereo SIF - AGC stereo Slave addr + R/W =0 MAD=0 / MAD=1 86 / 84 86 / 84 86 / 84 86 / 84 86 / 84 86 / 84 86 / 84 86 / 84 86 / 84 86 86 / / 84 84 Subaddress 00 00 00 00 00 00 00 00 00 00 00 switch reg. D4 D4 D4 C4 84 DC DC DC DC DC DC adjust reg. 70 70 70 10 10 70 70 70 10 10 10 data reg. 09 0A 0B 0B 13 1D 9D 81 1D 9D 81
all bytes in [hex]
3X8168 ED November 02
Page: 9/14
8168ED01.DOC
8.2.2 switch register acc. Chapter 8.2.1 switch register is addressed by subaddress 00 [hex]
switch register B7 B6
B5
B4
B3
B2
B1
B0 Video mode Sound bypass off 0 Sound bypass on 1
Audio mute FM 0 Inactive 1 active Carrier mode 0 intercarrier 1 QSS Modulation 0 0 1 0 x 1 Forced mute audio 0 off 1 on Output port 1 (Audio-SAW switch) 0 L' 1 B/G, D/K, I, L Output port 2 (not used) 0 Low ohmic active 1 High ohmic disabled
Recommended settings switch register mode B7 B6 B5 1 1 0 B/G 1 1 0 I 1 1 0 D/K 1 1 0 L 1 0 0 L 1 1 0 FM
Positive AM TV Negative TV FM Radio
B4 1 1 1 0 0 1
B3 0 0 0 0 0 1
B2 1 1 1 1 1 1
B1 0 0 0 0 0 0
B0 0 0 0 0 0 0
=[hex] D4 D4 D4 C4 84 DC
3X8168 ED 10/14 November 02
Page:
8168ED01.DOC
8.2.3 Adjust register acc. Chapter 8.2.1 adjust register is addressed by subaddress 01 [hex]
Adjust register C7 C6
C5
C4
C3
C2 0
C1 0
C0 0
AGC adjustment 1 0 Deemphasis 0 De-emphasis off 1 De-emphasis on Value of de-emphasis 0 75 us 1 50 us Audio gain 0 1
0 dB -6 dB
Recommended settings adjust register mode C7 C6 C5 0 1 1 B/G 0 1 1 I 0 1 1 D/K 0 0 0 L 0 0 0 L 0 1 1 FM 0 0 0 FM stereo
C4 1 1 1 1 1 1 1
C3 0 0 0 0 0 0 0
C2 0 0 0 0 0 0 0
C1 0 0 0 0 0 0 0
C0 0 0 0 0 0 0 0
=[hex] 70 70 70 10 10 70 10
3X8168 ED 11/14 November 02
Page:
8168ED01.DOC
8.2.3 data register acc. Chapter 8.2.1 data register is addressed by subaddress 02 [hex] data register E7 E6 E5 E4 E3 E2 2 0 0 1 1 Video IF TV Mode: B3=0 0 0 0 0 0 1 0 1 1 0 1 0 Radio Mode: B3=1 0 0 1 1 VIF, SIF, tuner gain 0 Normal gain 1 Minimum gain Gating (pos. AM) 0 0% 1 36 % VIF AGC output - TV Mode: B3=0 0 Normal port function (Output port2) 1 No port function PIN 21 output - Radio Mode: B3=1 0 FM-AFC radio output 1 FM-AGC or SIF-AGC radio output acc. E2...E4 Recommended settings data register mode E7 E6 E5 0 0 0 B/G 0 0 0 I 0 0 0 D/K 0 0 0 L 0 0 0 L 0 0 0 FM-AFC 1 0 0 FM-AGC 1 0 0 SIF-AGC
E1
nd
E0 0 1 0 1 MHz 4.5 5.5 6.0 6.5
IF
0 1 0 1 0 1 0 1
MHz 58.75 45.75 38.9 38.0 33.9 33.4 44 44 SIF-AGC radio output FM-AGC radio output
E4 0 0 0 0 1 1 1 0
E3 1 1 1 1 0 1 1 0
E2 0 0 0 0 0 1 1 0
E1 0 1 1 1 1 0 0 0
E0 1 0 1 1 1 1 1 1
=[hex] 09 0A 0B 0B 13 1D 9D 81
3X8168 ED 12/14 November 02
Page:
8168ED01.DOC
8.3.1. IC-bus sequence read Start Slave addr. Start Slave addr R/W Ack Ack not Stop R/W =1 Ack data Ack not Stop
start condition. Slave address = 43[hex]. Read/Write bit: 0 = write to component; 1 = master reads from component. acknowledge, generated by the component acknowledge, generated by the master stop condition
8.3.2 Read data format Status register Bit7 Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0 Power on reset 0 Normal operation 1 Power on reset
AFC value AFC4
AFC3
AFC2
AFC1
CARRDET - FM carrier detection 0 FM carrier not detected 1 FM carrier detected VIFLEV - VIF level input 0 VIF low level 1 VIF high level AFCWIN - AFC window (Note 1) 0 Tuning out of window (+/- 1.6 MHz) 1 Tuning in window (+/- 1.6 MHz)
Note1. If no IF input is applied, then bit AFCWIN = 1 due to the fact that the VCO is forced to the AFC window border for fast load-in behaviour. Automatic Frequency Control fVIF Versus f0 fVIF f0 - 187.5 kHz fVIF = f0 - 162.5 kHz fVIF = f0 - 137.5 kHz fVIF = f0 - 112.5 kHz fVIF = f0 - 87.5 kHz fVIF = f0 - 62.5 kHz fVIF = f0 - 37.5 kHz fVIF = f0 - 12.5 kHz fVIF = f0 + 12.5 kHz fVIF = f0 + 37.5 kHz fVIF = f0 + 62.5 kHz fVIF = f0 + 87.5 kHz fVIF = f0 + 112.5 kHz fVIF = f0 + 137.5 kHz fVIF = f0 + 162.5 kHz fVIF f0 + 187.5 kHz AFC4 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 AFC3 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 AFC2 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 AFC1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
3X8168 ED 13/14 November 02
Page:
8168ED01.DOC
9. ESD Protection
The frontend contains components that can be damaged by static discharge. Observe these precautions: Ground yourself before handling the frontend. Do not touch the frontend connector pins without ESD protection.
NAME J. Kreil DATE 07.November 2002 REV.: 01 FAM.- NO. DATE 07.11.2002 NAME J. Kreil SIGNATURE
3X8168 ED 14/14 November 02
Page:
8168ED01.DOC

▲Up To Search▲

Price & Availability of 3X8292

	To Download 3X8292 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .