 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin I2158 rev. A 08/02 SAFEIR Series 25ETS..S INPUT RECTIFIER DIODE Description/Features The 25ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. VF IFSM < 1V @ 10A = 300A VRRM 800 - 1200V Output Current in Typical Applications Single-phase Bridge Capacitive input filter TA = 55C, TJ = 125C, common heatsink of 1C/W 20 Three-phase Bridge 23 Units A Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM Range (*) IFSM VF TJ @ 10 A, TJ = 25C Package Outline Units A V A V C 25ETS.. 25 800 - 1200 300 1.0 - 40 to 150 D2 Pak (SMD-220) (*) for higher voltage up to 1600V contact factory www.irf.com 1 25ETS..S SAFEIR Series Bulletin I2158 rev. A 08/02 Voltage Ratings VRRM, maximum Part Number peak reverse voltage V 800 1200 VRSM , maximum non repetitive peak reverse voltage V 900 1300 IRRM 150C mA 1 25ETS08S 25ETS12S Provide terminal coating for voltages above 1200V Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2t for fusing 25ETS..S 25 250 300 316 442 Units A A A2s A s 2 Conditions @ TC = 106 C, 180 conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied I t 2 Max. I t for fusing 2 4420 Electrical Specifications Parameters VFM rt IRM Max. Forward Voltage Drop Forward slope resistance 25ETS..S 1.14 9.62 0.87 0.1 1.0 Units V m V mA Conditions @ 25A, TJ = 25C TJ = 150C TJ = 25 C TJ = 150 C VF(TO) Threshold voltage Max. Reverse Leakage Current VR = rated VRRM Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range to Case Max. Thermal Resistance Junction to Ambient RthCS Typ. Thermal Resistance Case to Heatsink wt T Approximate Weight Mounting Torque Case Style Min. Max. 0.5 2 (0.07) 6 (5) 12 (10) C/W g (oz.) Kg-cm (Ibf-in) Mounting surface, smooth and greased 25ETS..S - 40 to 150 - 40 to 150 0.9 62 Units C C C/W C/W Conditions RthJC Max. Thermal Resistance Junction RthJA DC operation D2Pak (SMD-220) 2 www.irf.com 25ETS..S SAFEIR Series Bulletin I2158 08/02 Maximum Allowable Case Temperature (C) 150 140 130 Maximum Allowable Case Temperature (C) 25ETS..S Series R thJC (DC) = 0.9 K/W 150 140 130 120 110 30 25ETS..S Series RthJC (DC) = 0.9 K/W Conduction Angle Conduction Period 120 110 100 90 80 0 5 10 15 20 25 30 Average Forward Current (A) Fig. 1 - Current Rating Characteristics 30 60 90 120 180 60 100 90 0 5 90 120 180 DC 10 15 20 25 30 35 40 Average Forward Current (A) Fig. 2 - Current Rating Characteristics Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) 40 35 30 25 20 15 10 5 0 0 180 120 90 60 30 RMS Limit 60 50 40 30 DC 180 120 90 60 30 Conduction Angle RMS Limit 20 10 0 0 10 20 Conduction Period 25ETS..S Series T J = 150C 25ETS..S Series T J = 150C 5 10 15 20 25 30 30 40 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 300 200 At Any Rated Load Condition And With Rated V Applied Following Surge. RRM Initial T J = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J= 150C No Voltage Reapplied Rated V Reapplied RRM 200 100 100 25ETS..S Series 25ETS..S Series 0 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulsed (N) 0 0.01 0.1 1 10 Fig. 5 - Maximum Non-Repetitive Surge Current Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current www.irf.com 3 25ETS..S SAFEIR Series Bulletin I2158 rev. A 08/02 1000 TJ = 25C Instantaneous Forward Current (A) 100 T = 150C J 10 25ETS.. Series 1 0 1 2 3 4 5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 1 T ransient T hermal Impedance Z thJC W) (C/ D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Steady State Value (DC Operation) Single Pulse 0.1 25ETS. .Series 0.01 0.0001 0.001 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 25ETS..S SAFEIR Series Bulletin I2158 08/02 Outline Table 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 10.16 (0.40) REF. 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Dimensions in millimeters and inches Marking Information THIS IS A 25ETS12S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 IN THE ASSEMBLY LINE "L" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 25ETS12S DATE CODE YEAR 0 = 2000 WEEK 02 LINE L www.irf.com 5 25ETS..S SAFEIR Series Bulletin I2158 rev. A 08/02 Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIR ECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) 24.30 (0.957) 23.90 (0.941) TRL 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) DIA. 4.72 (0.186) 4.52 (0.178) FEED DIRECTION Dimensions in millimeters and inches 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 60 (2.362) DIA . MIN. 360 (14.173) DIA. MAX. of 800 pieces per reel for both TRL and TRR. 6 www.irf.com 25ETS..S SAFEIR Series Bulletin I2158 08/02 Ordering Information Table Device Code 25 1 E 2 T 3 S 4 12 5 S 6 TRL 7 BASE + 2 (K) 1 2 3 4 5 6 7 - Current Rating Circuit Configuration: E = Single Diode Package: T = TO-220AC Type of Silicon: S = Standard Recovery Rectifier Voltage code: Code x 100 = VRRM S = TO-220 D2Pak (SMD-220) Version Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel 1 (A) 3 (A) - - 08 = 800V 12 = 1200V (*) for higher voltage up to 1600V contact factory Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/02 www.irf.com 7 |
Price & Availability of 25ETS12STRR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |