 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPICE MODELS: MURS140 MURS160 MURS140 - MURS160 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features * * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 35A Peak Ideally Suited for Automated Assembly Available in Lead Free Finish/RoHS Compliant Version (Note 5) SMB Dim A Min 3.30 4.06 1.96 0.15 5.00 0.10 0.76 2.00 Max 3.94 4.57 2.21 0.31 5.59 0.20 1.52 2.62 B A C B C D Mechanical Data * * * * * * * * * Case: SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 Also available in Lead Free Plating (Matte Tin Finish). Please see Ordering Information, Note 7, on Page 3 Marking: MURS140: U1GB MURS160: U1JB D J E G H H G E J All Dimensions in mm Polarity: Cathode Band or Cathode Notch Ordering Information: See Page 3 Weight: 0.093 grams (approximate) @ TA = 25C unless otherwise specified Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 150C @ TT = 125C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 3) Forward Recovery Time (Note 4) Typical Junction Capacitance (Note 2) Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr tfr Cj RqJT Tj, TSTG MURS140 400 283 1.0 2.0 35 1.25 1.05 5.0 150 50 50 45 13 -65 to +175 MURS160 600 424 Unit V V A A V mA ns ns pF K/W C @ IF = 1.0A, TJ = 25C @ IF = 1.0A, TJ = 150C @ TA = 25C @ TA = 150C Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. Measured with IF = 1.0A, di/dt = 100A/ms, Duty Cycle 2.0%. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30130 Rev. 6 - 2 1 of 3 www.diodes.com MURS140 - MURS160 a Diodes Incorporated 6 IO, AVERAGE FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 10.0 7.0 5.0 3.0 2.0 1.0 TC = 25 C 0 1750C 1000C 5 4 3 2 1 0 25 50 75 100 125 150 175 TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 0.5 0.1 0.05 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 VF, INSTANTANEOUS VOLTAGE (V) Fig. 2 Typical Forward Current IFSM, PEAK FORWARD SURGE CURRENT (A) 60 Single Half-Sine-Wave (JEDEC Method) 80 40 20 8.0 4.0 2.0 0.8 TJ = 1000C TJ = 1750C 50 40 30 20 0.4 0.2 0.08 0.04 0.02 10 0.008 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 100 TJ = 250C 0.004 0.002 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Current trr +0.5A Device Under Test (-) Pulse Generator (Note 2) 0A (+) 50V DC Approx -0.25A (-) Oscilloscope (Note 1) (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30130 Rev. 6 - 2 2 of 3 www.diodes.com MURS140 - MURS160 Ordering Information Device MURS140-13 MURS160-13 Notes: (Note 6) Packaging SMB SMB Shipping 5000/Tape & Reel 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 7. For Lead Free Finish/RoHS Compliant version part numbers, please add "-F" suffix to the part numbers above. Example: MURS140-13-F Marking Information YWW XXXX XXXX = Product type marking code (See Page 1) = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 DS30130 Rev. 6 - 2 3 of 3 www.diodes.com MURS140 - MURS160 |
Price & Availability of MURS1401
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |