 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CR Ultra Low Resistance Chip Resistors NEW INTRODUCTION The CR series resistors are manufactured with sophisticated process technology using up-to-date automated production facilities that enable production of small-size, light weight and thin component. They are used in surface mount applications where high density of components with high performance, reliability, precise and very low ohmic values are needed. 6 FEATURES w w w * * * * Low resistance with tight tolerance. Wide resistance range. Highly reliable multi-layer electrode construction. Small size, low resistance. .D at Sh a et e 4U . om c RATINGS Type Rated Power at 70 C Operating Temp Range Derating to 0 load at Maximum Working Voltage Maximum Overload Voltage Tolerance Resistance Range 0.02 R<0.04 * F( 1%) 0.04 R<0.10 0.1 R<1.0 J( 5%) 0.02 R<0.04 * 0.04 R<1.0 CR21 0805(2012) CR32 1206(3216) CR40 1210(3225) CR46 1218(3246) CR50 3/4W 2010(5025) 1/8W 1/4W 150V 300V 200 200 100 200 200 200V 400V 200 200 100 200 200 1W -55 C to +125 C 125 C 200V 200V 400V 400V RTC(ppm/ C) 1/3W * Resistor supplied with double sides resistor layer Consult Factory DIMENSIONS L1 Type CR21 CR32 0805(2012) w (Millimeters) DIMENSIONS L W H w w .D t a W S a L2 e h 150 100 200 200 L1 L2 150 t e 150 100 200 150 200 H U 4 200V 400V 150 100 200 200 150 .c CR63 1W 2512(6432) m o 200V 400V 150 150 100 200 200 R330 L Inches H* 0.024 0.002 (0.60 0.10) L1 0.016 0.008 (0.40 0.20) L2 0.016 0.008 (0.40 0.20) 0.079 0.006 (2.00 0.15) 0.049 0.004 (1.25 0.10) 0.020 0.004 (0.50 0.10) 0.122 0.004 (3.10 0.10) 0.063 0.006 (1.60 0.15) 0.022 0.002 (0.55 0.05) 0.024 0.002 (0.65 0.10) 0.020 0.010 (0.50 0.25) 0.020 0.010 (0.50 0.25) 1206(3216) CR40 1210(3225) 0.122 0.004 (3.10 0.10) 0.098 0.006 (2.50 0.15) 0.022 0.002 (0.55 0.05) 0.024 0.002 (0.65 0.10) 0.020 0.010 (0.50 0.25) 0.016 0.010 (0.40 0.20) CR46 1218(3246) 0.122 0.004 (3.10 0.10) 0.181 0.006 (4.60 0.15) 0.022 0.002 (0.55 0.05) 0.024 0.002 (0.65 0.10) 0.020 0.010 (0.50 0.25) 0.016 0.010 (0.40 0.20) CR50 2010(5025) 0.200 0.006 (5.00 0.15) 0.098 0.006 (2.50 0.15) 0.022 0.002 (0.55 0.05) 0.024 0.002 (0.65 0.10) 0.024 0.010 (0.60 0.25) CR63 2512(6432) 0.250 0.006 (6.30 0.15) 0.126 0.006 (3.20 0.15) 0.022 0.002 (0.55 0.05) 0.024 0.002 (0.65 0.10) 0.024 0.010 (0.60 0.25) * Applicable to resistor with double side resistor layers Consult Factory ASJ PTE LTD w w w .D at Sh a 0.016 0.010 (0.40 0.20) et e 4U . om c 0.016 0.010 (0.40 0.20) CR Ultra Low Resistance Chip Resistors NEW PERFORMANCE CHARACTERISTICS Performance Test DC Resistance Resistance Temperature Coefficient Voltage Coefficient Short Time Overload Insulation Resistance Dielectric Withstanding Voltage Intermittent Overload Noise (Applicable for 1 ohm only) Terminal Strength A) Bend Test (applicable for chip size 1210) B) Pull Test (applicable for chip size 0805) C) Push Test (applicable for chip size >0402) Resistance to Soldering Heat Solderability Resistance to Solvent Low Temperature Low Temperature with Load High Temperature Terminal Shock (Temperature Cycling) Resistance to Damp Heat (Humidity) Loadlife Salt Spray Test Method JIS C 5202 5.1 JIS C 5202 5.2 JIS C 5202 5.3 Method II JIS C 5202 5.5 JIS C 5202 5.6 JIS C 5202 5.7 JIS C 5202 5.8 JIS C 5202 5.9 JIS C 5202 6.1 JIS C 5202 6.1.4(1) Method 2 JIS C 5202 6.1 JIS C 5202 6.1.4(3) JIS C 5202 6.10 JIS C 5202 6.11 JIS C 5202 6.9 JIS C 5202 7.1 JIS C 5202 7.1 JIS C 5202 7.2 JIS C 5202 7.4 JIS C 5202 7.5 JIS C 5202 7.10 JIS C 5202 7.7 Specification 1% tol 100 ppm/C 100 ppm/V (0.5%+0.05 ohm) >10G ohm (1%+0.05 ohm) (5%+0.10 ohm) <-10dB (0.32v/v) (1%+0.05 ohm) (1%+0.05 ohm) (1%+0.05 ohm) (0.5%+0.05 ohm) 95% coverage (1%+0.05 ohm) (0.5%+0.05 ohm) (0.5%+0.05 ohm) (1%+0.05 ohm) (0.5%+0.05 ohm) (0.5%+0.05 ohm) (1%+0.05 ohm) (3%+0.10 ohm) 5% 200 ppm/C 100 ppm/V (1%+0.05 ohm) >10G ohm (1%+0.05 ohm) (5%+0.10 ohm) <-10dB (0.32v/v) (1%+0.05 ohm) (1%+0.05 ohm) (1%+0.05 ohm) (0.5%+0.05 ohm) 95% coverage (1%+0.05 ohm) (1%+0.05 ohm) (1%+0.05 ohm) (2%+0.10 ohm) (1%+0.05 ohm) (2%+0.05 ohm) (2%+0.10 ohm) (3%+0.10 ohm) 7 DERATING CURVE 100 Rated Power (%) 80 60 40 20 -55C 70C 125C 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 Ambient Temperature ORDERING CODE CR XX - XXXX - X X Type Thick Film Chip Resistors Size 21 (0805/2012) 32 (1206/3216) 40 (1210/3225) 46 (1218/3246) 50 (2010/5025) 63 (2512/6432) Nominal Resistance Resistors 4Digit E24 & E96 Series 0.1 = R100 0.05 = R050 Resistance Tolerance F= 1% G= 2% J= 5% Packaging Q=4000 pcs F=5000 pcs T=10000 pcs E=4000 pcs Lead Free L=5000 pcs Lead Free K=10000 pcs Lead Free MARKING DIAGRAMS R330 Marking Explanation * 4 digit alpha numeric marking for 1%, 2% or 5% * R denotes the decimal place. ASJ PTE LTD |
Price & Availability of CR321R00FF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |