Part Number Hot Search : 
DC100210 7447040 D5331M CM7257 CM7257 IC16F8 20101 SIP2805
Product Description
Full Text Search
 

To Download STD9N10-1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 N-CHANNEL 100V - 0.23 - 9A DPAK/IPAK POWER MOS TRANSISTOR
Table 1. General Features
Type STD9N10 STD9N10-1 VDSS 100 V 100 V RDS(on) < 0.27 < 0.27 ID 9A 9A
STD9N10 STD9N10-1
Figure 1. Package
FEATURES SUMMARY TYPICAL RDS(on) = 0.23

AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100C LOW GATE CHARGE HIGH CURRENT CAPABILITY 175C OPERATING TEMPERATURE APPLICATION ORIENTED CHARACTERIZATION THROUGH-HOLE IPAK (TO-251) POWER PACKAGE IN TUBE (SUFFIX "-1") SURFACE-MOUNTING DPAK (TO-252) POWER PACKAGE IN TAPE & REEL (SUFFIX "T4")
IPAK TO-251
3 2 1
3 1
DPAK TO-252
Figure 2. Internal Schematic Diagram
APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING

SOLENOID AND RELAY DRIVERS REGULATORS DC-DC & DC-AC CONVERTERS MOTOR CONTROL, AUDIO AMPLIFIERS AUTOMOTIVE ENVIRONMENT (INJECTION, ABS, AIR-BAG, LAMPDRIVERS, Etc.)
Table 2. Order Codes
Part Number STD9N10T4 STD9N10-1 Marking D9N10 D9N10 Package DPAK IPAK Packaging TAPE & REEL TUBE
REV. 2 May 2004 1/12
STD9N10/STD9N10-1
Table 3. Absolute Maximum Ratings
Symbol VDS VDGR VGS ID ID IDM
(1)
Parameter Drain-source Voltage (VGS = 0) Drain- gate Voltage (RGS = 20 k) Gate-source Voltage Drain Current (cont.) at TC = 25 C Drain Current (cont.) at TC = 100 C Drain Current (pulsed) Total Dissipation at TC = 25 C Derating Factor
Value 100 100 20 9 6 36 45 0.3 -65 to 175 175
Unit V V V A A A W W/C C C
Ptot
Tstg Tj
Storage Temperature Max. Operating Junction Temperature
Note: 1. Pulse width limited by safe operating area.
Table 4. Thermal Data
Symbol Rthj-case Rthj-amb Tl Parameter Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max Max Value 3.33 100 275 Unit C/W C/W C
Maximum Lead Temperature For Soldering Purpose
Table 5. Avalanche Characteristics
Symbol IAR EAS EAR IAR Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max, < 1%) Single Pulse Avalanche Energy (starting Tj = 25 C; ID = IAR; VDD = 25 V) Repetitive Avalanche Energy (pulse width limited by Tj max, < 1%) Avalanche Current, Repetitive or Not-Repetitive (Tc = 100 C, pulse width limited by Tj max, < 1%) Max Value 9 30 7 6 Unit A mJ mJ A
2/12
STD9N10/STD9N10-1
ELECTRICAL CHARACTERISTICS (Tcase = 25C unless otherwise specified) Table 6. Off
Symbol V(BR)DSS IDSS Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) IGSS Gate-body Leakage Current (VDS = 0) Test Conditions ID = 250 A; VGS = 0 VDS = Max Rating VDS = Max Rating x 0.8; Tc = 125 C VGS = 20 V Min. 100 250 1000 100 Typ. Max. Unit V A A nA
Table 7. On (1)
Symbol VGS(th) RDS(on) Parameter Gate Threshold Voltage Static Drain-source On Resistance Test Conditions VDS = VGS; ID = 250 A VGS = 10V; ID = 4.5 A VGS = 10V; ID = 4.5 A; Tc = 100 C Min. 2 Typ. 3 0.23 Max. 4 0.27 0.54 Unit V
Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %
Table 8. Dynamic
Symbol gfs (1) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VDS > ID(on) x RDS(on)max; ID = 4.5 A VDS = 25 V; f = 1 MHz; VGS = 0 Min. 2 Typ. 4 330 90 25 450 120 40 Max. Unit S pF pF pF
Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %
Table 9. Switching On
Symbol td(on) tr (di/dt)on Qg Qgs Qgd Parameter Turn-on Time Rise Time Turn-on Current Slope Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDD = 50 V; ID = 4.5 A; RG = 4.7 VGS = 10 V (see test circuit, Figure 22) VDD = 80 V; ID = 9 A; RG = 4.7 VGS = 10 V (see test circuit, Figure 22) VDD = 80 V; ID = 9 A; VGS = 10 V Min. Typ. 10 40 440 15 6 5 25 Max. 15 60 Unit ns ns A/s nC nC nC
Table 10. Switching Off
Symbol tr(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions VDD = 80 V; ID = 9 A; RG = 4.7 VGS = 10 V (see test circuit, Figure 24) Min. Typ. 15 25 50 Max. 25 35 70 Unit ns ns ns
3/12
STD9N10/STD9N10-1
Table 11. Source Drain Diode
Symbol ISD ISDM (1) VSD (2) trr Qrr IRRAM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse RecoveryCharge Reverse RecoveryCurrent ISD = 9 A; VGS = 0 ISD = 9 A; di/dt = 100 A/s VDD = 20 V; Tj = 150 C (see test circuit, Figure 24) 80 0.2 5 Test Conditions Min. Typ. Max. 9 36 1.5 Unit A A V ns C A
Note: 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %
Figure 3. Safe Operating Area
Figure 4. Thermal Impedance
Figure 5. Derating Curve
Figure 6. Output Characteristics
4/12
STD9N10/STD9N10-1
Figure 7. Transfer Characteristics Figure 8. Transconductance
Figure 9. Static Drain-source On Resistance
Figure 10. Gate Charge vs Gate-source Voltage
Figure 11. Capacitance Variations
Figure 12. Normalized Gate Threshold Voltage vs Temperature
5/12
STD9N10/STD9N10-1
Figure 13. Normalized On Resistance vs Temperature Figure 14. Turn-on Current Slope
Figure 15. Turn-off Drain-source Voltage Slope
Figure 16. Cross-over Time
Figure 17. Switching Safe Operating Area
Figure 18. Accidental Overload Area
6/12
STD9N10/STD9N10-1
Figure 19. Source-drain Diode Forward Characteristics
7/12
STD9N10/STD9N10-1
Figure 20. Unclamped Inductive Load Test Circuit Figure 21. Unclamped Inductive Waveforms
Figure 22. Switching Times Test Circuits For Resistive Load
Figure 23. Gate Charge Test Circuit
Figure 24. Test Circuit For Inductive Load Switching And Diode Recovery Times
8/12
STD9N10/STD9N10-1
PACKAGE MECHANICAL Table 12. DPAK Mechanical Data
Symbol A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0 millimeters Min 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.8 1.00 8 0.024 0 Typ Max 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 Min 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 0.039 0 0.024 0.024 0.244 0.260 0.181 0.398 inches Typ Max 0.094 0.043 0.009 0.035 0.213
Figure 25. DPAK Package Dimensions
P032P_B
Note: Drawing is not to scale.
9/12
STD9N10/STD9N10-1
Table 13. IPAK Mechanical Data
Symbol A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 0.63 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 0.031 millimeters Min 2.2 0.9 0.7 0.64 5.2 Typ Max 2.4 1.1 1.3 0.9 5.4 0.85 0.012 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.039 Min 0.086 0.035 0.027 0.025 0.204 inches Typ Max 0.094 0.043 0.051 0.031 0.212 0.033
Figure 26. IPAK Package Dimensions
H
C A C2
L2
D
B3 B6
A1
L
=
B2
=
3
B5 G
E
=
=
L1
1
2
B
A3
0068771-E
Note: Drawing is not to scale.
10/12
STD9N10/STD9N10-1
REVISION HISTORY Table 14. Revision History
Date March-1996 3-May-2004 Revision 1 2 First Issue Stylesheet update. No content change. Description of Changes
11/12
STD9N10/STD9N10-1
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners (c) 2004 STMicroelectronics - All rights reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States www.st.com
12/12


▲Up To Search▲   

 
Price & Availability of STD9N10-1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X