|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PHOTOCOUPLER PS2562-1,-2,-4,PS2562L-1,-2,-4 PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 HIGH ISOLATION VOLTAGE DARLINGTON TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES -NEPOC Series- DESCRIPTION The PS2562-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2562-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2562L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. The PS2562L1-1, -2, -4 are lead bending type for long creepage distance. The PS2562L2-1, -2, -4 are lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES * High isolation voltage (BV = 5 000 Vr.m.s.) * High current transfer ratio (CTR = 2 000 % TYP.) * High-speed switching (tr, tf = 100 s TYP.) * Ordering number of tape product: PS2562L-1-E3, E4, F3, F4, PS2562L-2-E3, E4, PS2562L2-1-E3, E4 * Safety standards * UL approved: File No. E72422 * BSI approved: No. 7112/7420 * CSA approved: No. CA 101391 * NEMKO approved: No. A21409 * SEMKO approved: No. 0144211 * DEMKO approved: No. 300535 * FIMKO approved: No. FI10620A1 * VDE approved (Option) APPLICATIONS * Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller Document No. PN10235EJ02V0DS (2nd edition) Date Published December 2003 CP(K) The mark shows major revised points. PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type (New package) PS2562-1 4.60.35 4 TOP VIEW 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 1 2 7.62 3.20.4 4.150.4 3.50.3 1.250.15 0 to 15 +0.1 0.25 -0.05 0.500.10 0.25 M 2.54 Caution New package 1-ch only DIP Type PS2562-1 4.60.5 4 TOP VIEW 3 1. Anode 2. Cathode 3. Emitter 4. Collector PS2562-2 9.70.5 8 7 TOP VIEW 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.50.5 6.50.5 1 2 7.62 3.30.5 4.150.4 1 2 34 7.62 3.30.5 4.150.4 3.50.3 3.50.3 1.250.15 0 to 15 +0.1 0.25 -0.05 0.500.10 0.25 M 2.54 1.250.15 2.54 0.500.10 0.25 M 0 to 15 +0.1 0.25 -0.05 PS2562-4 19.80.5 TOP VIEW 16 15 14 13 12 11 10 9 6.50.5 1 7.62 2 3 3.30.5 4.150.4 3.50.3 45678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 1.250.15 2.54 0.500.10 0.25 M 0 to 15 +0.1 0.25 -0.05 2 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Lead Bending Type (New package) PS2562L-1 4.60.35 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 1 0.25 +0.1 -0.05 2 3.50.3 1.250.15 0.25 M 2.54 0.15 0.90.25 9.600.4 Caution New package 1-ch only Lead Bending Type PS2562L-1 4.60.5 0.1 +0.1 -0.05 PS2562L-2 9.70.5 TOP VIEW 4 3 TOP VIEW 8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 1 2 3 4 6.50.5 1 2 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 0.25 +0.1 -0.05 0.25 +0.1 -0.05 0.1 +0.1 -0.05 3.50.3 3.50.3 1.250.15 0.25 M 2.54 0.15 0.90.25 9.600.4 1.250.15 0.25 M 2.54 0.15 0.90.25 9.600.4 PS2562L-4 19.80.5 TOP VIEW 16 15 14 13 12 11 10 9 6.50.5 1 0.25 +0.1 -0.05 2345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 3.50.3 1.250.15 0.25 M 2.54 0.15 0.90.25 9.600.4 0.1 +0.1 -0.05 0.1 +0.1 -0.05 Data Sheet PN10235EJ02V0DS 3 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Lead Bending Type For Long Creepage Distance (New Package) PS2562L1-1 4.60.35 4 3 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 1 1 2 2 10.16 3.15 3.85 0.35 0.4 3.5 0.3 0.500.1 0.25 M 1.250.15 2.54 0.25-0.05 +0.1 0 to 15 Lead Bending Type For Long Creepage Distance PS2562L1-1 4.60.5 PS2562L1-2 9.70.5 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 10.16 TOP VIEW 8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 1 2 3 4 6.50.5 6.50.5 10.16 3.150.35 3.850.4 3.150.35 3.850.4 3.50.3 3.50.3 0 to 15 0.25 +0.1 -0.05 0 to 15 0.25 +0.1 -0.05 1.250.15 0.500.10 0.25 M 2.54 1.250.15 0.500.10 0.25 M 2.54 PS2562L1-4 19.80.5 TOP VIEW 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 1 2 3 4 5 6 7 8 Anode Cathode Emitter Collector 16 15 14 13 12 11 10 9 6.50.5 10.16 3.150.35 3.850.4 3.50.3 0 to 15 0.25 +0.1 -0.05 1.250.15 0.500.10 0.25 M 2.54 4 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Lead Bending Type For Long Creepage Distance (Gull-Wing) (New Package) PS2562L2-1 4.60.35 4 3 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 1 2 0.250.2 3.50.3 1.250.15 0.25 M 0.25 2.54 0.90.25 10.16 11.8-0.5 +0.2 Lead Bending Type For Long Creepage Distance (Gull-Wing) PS2562L2-1 4.60.5 0.25-0.05 1 2 +0.1 PS2562L2-2 9.70.5 8 1. Anode 2. Cathode 3. Emitter 4. Collector 7 TOP VIEW 4 3 TOP VIEW 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 1 2 3 4 6.50.5 1 2 10.16 6.50.5 0.25 +0.1 -0.05 0.250.2 0.25 +0.1 -0.05 10.16 3.50.3 1.250.15 0.25 M 2.54 0.25 0.90.25 11.8 +0.2 -0.5 3.50.3 1.250.15 0.25 M 2.54 0.25 0.90.25 11.8 +0.2 -0.5 PS2562L2-4 19.80.5 TOP VIEW 16 15 14 13 12 11 10 9 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 1 2 3 4 5 6 7 8 Anode Cathode Emitter Collector 6.50.5 0.25 +0.1 -0.05 10.16 3.50.3 1.250.15 0.25 M 2.54 0.25 0.90.25 11.8 +0.2 -0.5 0.250.2 0.250.2 Data Sheet PN10235EJ02V0DS 5 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 MARKING EXAMPLE PS2562-1 No. 1 pin Mark No. 1 pin Mark PS2562-2 Country Assembled 2562 M 003 Assembly Lot PS2562-2 M 003 Assembly Lot M 0 03 M 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Package Standard PKG New PKG Made in Japan Made in Taiwan Blank E F H Blank F PS2562-4 No. 1 pin Mark Country Assembled PS2562-4 M 003 Assembly Lot M 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Blank F 6 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) (1/2) Part Number Package Packing Style Safety Standard Approval PS2562-1 PS2562L-1 PS2562L1-1 PS2562L2-1 PS2562L-1-E3 PS2562L-1-E4 PS2562L-1-F3 PS2562L-1-F4 PS2562L2-1-E3 PS2562L2-1-E4 PS2562-2 PS2562L-2 PS2562L1-2 PS2562L2-2 PS2562L-2-E3 PS2562L-2-E4 PS2562-4 PS2562L-4 PS2562L1-4 PS2562L2-4 PS2562-1-V PS2562L-1-V PS2562L1-1-V PS2562L2-1-V PS2562L-1-V-E3 PS2562L-1-V-E4 PS2562L-1-V-F3 PS2562L-1-V-F4 PS2562L2-1-V-E3 PS2562L2-1-V-E4 Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs VDE approved products (Option) PS2562-1 16-pin DIP Magazine case 20 pcs PS2562-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2562-2 Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) Application Part Number PS2562-1 *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10235EJ02V0DS 7 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) (2/2) Part Number Package Packing Style Safety Standard Approval PS2562-2-V PS2562L-2-V PS2562L1-2-V PS2562L2-2-V PS2562L-2-V-E3 PS2562L-2-V-E4 PS2562-4-V PS2562L-4-V PS2562L1-4-V PS2562L2-4-V 16-pin DIP Magazine case 20 pcs PS2562-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs VDE approved products (Option) Application Part Number PS2562-2 *1 *1 For the application of the Safety Standard, following part number should be used. 8 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Pb-Free) (1/2) Part Number Package Packing Style Safety Standard Approval PS2562-1-A PS2562L-1-A PS2562L1-1-A PS2562L2-1-A PS2562L-1-E3-A PS2562L-1-E4-A PS2562L-1-F3-A PS2562L-1-F4-A PS2562L2-1-E3-A PS2562L2-1-E4-A PS2562-2-A PS2562L-2-A PS2562L1-2-A PS2562L2-2-A PS2562L-2-E3-A PS2562L-2-E4-A PS2562-4-A PS2562L-4-A PS2562L1-4-A PS2562L2-4-A PS2562-1-V-A PS2562L-1-V-A PS2562L1-1-V-A PS2562L2-1-V-A PS2562L-1-V-E3-A PS2562L-1-V-E4-A PS2562L-1-V-F3-A PS2562L-1-V-F4-A PS2562L2-1-V-E3-A PS2562L2-1-V-E4-A Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs VDE approved products (Option) PS2562-1 16-pin DIP Magazine case 20 pcs PS2562-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2562-2 Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) Application Part Number PS2562-1 *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10235EJ02V0DS 9 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Pb-Free) (2/2) Part Number Package Packing Style Safety Standard Approval PS2562-2-V-A PS2562L-2-V-A PS2562L1-2-V-A PS2562L2-2-V-A PS2562L-2-V-E3-A PS2562L-2-V-E4-A PS2562-4-V-A PS2562L-4-V-A PS2562L1-4-V-A PS2562L2-4-V-A 16-pin DIP Magazine case 20 pcs PS2562-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs VDE approved products (Option) Application Part Number PS2562-2 *1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings PS2562-1 Diode Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Unit PS2562-2,-4 6 80 V mA 1.2 120 1 40 6 mW/C mW/ch A V V 160 1.6 160 5 000 mA/ch mW/C mW/ch Vr.m.s. C C VR IF PD/C PD IFP VCEO VECO IC 1.5 150 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation 200 2.0 200 PC/C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature -55 to +100 -55 to +150 *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 10 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF) *1 Symbol VF IR Ct ICEO IF = 10 mA VR = 5 V Conditions MIN. TYP. 1.17 MAX. 1.4 5 Unit V A pF V = 0 V, f = 1.0 MHz VCE = 40 V, IF = 0 mA 50 400 nA CTR IF = 1 mA, VCE = 2 VDC 200 2 000 % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 VCE(sat) IF = 1 mA, IC = 2 mA 11 1.0 V RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 10 mA, RL = 100 10 0.5 100 100 pF s *2 *1 CTR rank (only PS2562-1, PS2562L-1, PS2562L1-1, PS2562L2-1) K : 2 000 to L: M: (%) 700 to 3 400 (%) 200 to 1 000 (%) *2 Test circuit for switching time Pulse Input PW = 1 ms Duty Cycle = 1/10 IF 50 VOUT RL = 100 VCC Data Sheet PN10235EJ02V0DS 11 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 150 200 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Diode Power Dissipation PD (mW) 100 PS2562-1 PS2562-2,-4 1.5 mW/C 150 PS2562-2,-4 PS2562-1 2 mW/C 100 1.6 mW/C 50 50 1.2 mW/C 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 TA = +100 C +60 C +25 C COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 140 5 mA Collector Current IC (mA) Forward Current IF (mA) 120 100 80 60 40 20 1 mA IF = 0.5 mA 2 4 6 8 10 2 mA 10 5 1 0.5 0 C -25 C -55 C 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) 10 000 COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 200 100 5 mA 2 mA 1 mA 10 5 0.5 mA 1000 100 Collector Current IC (mA) VCE = 2 V 5V 10 V 24 V 40 V 50 10 0.2 mA 1 0.5 0.2 0.4 IF = 0.1 mA 1 -50 -25 0 25 50 75 100 0.6 0.8 1.0 1.2 1.4 1.6 Ambient Temperature TA (C) Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10235EJ02V0DS 12 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT 8 000 Current Transfer Ratio CTR (%) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 -50 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25 C, IF = 1 mA, VCE = 2 V VCE = 2 V 7 000 6 000 Sample A B C 5 000 D 4 000 3 000 2 000 1 000 0 0.1 0.5 1 5 10 30 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 1 000 Current Transfer Ratio CTR (%) CURRENT TRANSFER RATIO vs. FORWARD CURRENT 3 000 VCE = 2 V 2 500 2 000 1 500 1 000 500 0 Sample A B C D VCC = 5 V, 500 IC = 2 mA, CTR = 2 280 % tf 100 50 td tr Switching Time t ( s) 10 5 2 30 50 ts 100 500 1k 5k 10 50 100 500 Load Resistance RL () Forward Current IF ( A) SWITCHING TIME vs. LOAD RESISTANCE 10 000 5 000 Switching Time t ( s) FREQUENCY RESPONSE IF = 1 mA, VCE = 2 V tf VCC = 5 V, IF = 1 mA, CTR = 2 280 % Normalized Gain GV 0 -5 -10 -15 RL = 100 1 000 500 ts 100 50 tr 10 td 300 500 1k 5k 10 k 50 k 100 k -20 0.2 0.5 1 2 5 10 20 50 100 200 Load Resistance RL () Frequency f (kHz) Remark The graphs indicate nominal characteristics. Data Sheet PN10235EJ02V0DS 13 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 LONG TERM CTR DEGRADATION 1.2 IF = 1 mA 1.0 CTR (Relative Value) 0.8 0.6 0.4 0.2 0 10 TA = 25 oC TA = 60 oC 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. 14 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 7.50.1 16.00.3 1.550.1 8.00.1 10.30.1 5.30.1 4.00.1 0.4 Tape Direction PS2562L-1-E3 PS2562L-1-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 80.01.0 2542.0 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10235EJ02V0DS 15 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 16.00.3 7.50.1 1.550.1 8.00.1 10.30.1 5.30.1 4.00.1 0.4 Tape Direction PS2562L-1-F3 PS2562L-1-F4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 3302.0 1001.0 17.51.0 21.51.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flang 16 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.550.1 4.40.2 11.50.1 2.050.1 12.00.1 6.60.2 0.38 Tape Direction PS2562L2-E3 PS2562L2-E4 Outline and Dimensions (Reel) 12.350.15 24.00.3 2.00.5 3302.0 2.00.5 13.00.2 R 1.0 21.00.8 1001.0 25.51.0 29.51.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange Data Sheet PN10235EJ02V0DS 17 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 16.00.3 7.50.1 10.30.1 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS2562L-2-E3 PS2562L-2-E4 Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 R 1.0 21.00.8 17.51.0 21.51.0 1001.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flang 18 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10235EJ02V0DS 19 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 20 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Climatic test class (DIN IEC 68 Teil 1/09.80) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test procedure a for type test and random test) Upr = 1.2 x UIORM, Pd < 5 pC Test voltage (partial discharge test procedure b for all devices test) Upr = 1.6 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 part 1) Material group (DIN VDE 0109) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) Ris MIN. 10 9 Symbol Speck Unit IV III 55/100/21 UIORM Upr Upr 890 1 068 1 424 Vpeak Vpeak Vpeak UTR 8 000 2 > 7.0 > 7.0 Vpeak mm mm CTI 175 III a Tstg TA -55 to +150 -55 to +100 12 11 C C Ris MIN. Ris MIN. 10 10 Tsi Isi Psi 175 400 700 C mA mW Data Sheet PN10235EJ02V0DS 21 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS2562L-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |