View BUZ71A_1147394.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BUZ71A
Data Sheet June 1999 File Number 2419.2
13A, 50V, 0.120 Ohm, N-Channel Power MOSFET
This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching regulators, switching converters, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. This type can be operated directly from integrated circuits. Formerly developmental type TA9770.
Features
* 13A, 50V * rDS(ON) = 0.120 * SOA is Power Dissipation Limited * Nanosecond Switching Speeds * Linear Transfer Characteristics * High Input Impedance * Majority Carrier Device * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards"
Ordering Information
PART NUMBER BUZ71A PACKAGE TO-220AB BRAND BUZ71A
NOTE: When ordering, use the entire part number.
Symbol
D
G
S
Packaging
JEDEC TO-220AB
SOURCE DRAIN GATE DRAIN (FLANGE)
4-17
CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999
BUZ71A
Absolute Maximum Ratings
TC = 25oC, Unless Otherwise Specified BUZ71A 50 50 13 48 20 40 100 0.32 -55 to 150 E 55/150/56 300 260 UNITS V V A A V W mJ W/oC oC
Drain to Source Breakdown Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current, TC = 55oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Single Pulse Avalanche Energy Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ DIN Humidity Category - DIN 40040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEC Climatic Category - DIN IEC 68-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg
oC oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE: 1. TJ = 25oC to 125oC.
Electrical Specifications
PARAMETER Drain to Source Breakdown Voltage Gate to Threshold Voltage Zero Gate Voltage Drain Current
TC = 25oC, Unless Otherwise Specified SYMBOL BVDSS VGS(TH) IDSS TEST CONDITIONS ID = 250A, VGS = 0V VGS = VDS, ID = 1mA (Figure 9) TJ = 25oC, VDS = 50V, VGS = 0V TJ = 125oC, VDS = 50V, VGS = 0V MIN 50 2.1 3.0 VDS = 25V, VGS = 0V, f = 1MHz (Figure 10) TYP 3 20 100 10 0.11 5.2 20 55 70 80 480 280 160 3.1 75 MAX 4 250 1000 100 0.12 30 85 90 110 650 450 280 UNITS V V A A nA S ns ns ns ns pF pF pF
oC/W oC/W
Gate to Source Leakage Current Drain to Source On Resistance (Note 2) Forward Transconductance (Note 2) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient
IGSS rDS(ON) gfs td(ON) tr td(OFF) tf CISS COSS CRSS RJC RJA
VGS = 20V, VDS = 0V ID = 9A, VGS = 10V (Figure 8) VDS = 25V, ID = 9A (Figure 11) VCC = 30V, ID 3A, VGS = 10V, RGS = 50, RL = 10
Source to Drain Diode Specifications
PARAMETER Continuous Source to Drain Current Pulsed Source to Drain Current Source to Drain Diode Voltage Reverse Recovery Time Reverse Recovery Charge NOTES: 2. Pulse Test: Pulse width 300s, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). 4. VDD = 10V, TJ = 25oC, L = 820H, IPEAK = 14A. (See Figures 14 and 15). SYMBOL ISD ISDM VSD trr QRR TC = 25oC TC = 25oC TJ = 25oC, TJ = 25oC, VR = 30V TEST CONDITIONS MIN ISD = 26A, VGS = 0V, (Figure 12) ISD = 13, dISD/dt = 100A/s, TYP 1.6 120 0.15 MAX 13 52 2.2 UNITS A A V ns C
4-18
BUZ71A Typical Performance Curves
1.2 POWER DISSIPATION MULTIPLIER 1.0 0.8
Unless Otherwise Specified
15 VGS 10V
ID, DRAIN CURRENT (A)
10
0.6 0.4
5
0.2 0 0 25 50 75 100 TC , CASE TEMPERATURE (oC) 125 150 0 0 50 100 TC, CASE TEMPERATURE (oC) 150
FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE
FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE
ZJC, TRANSIENT THERMAL IMPEDANCE
0.5 1 0.2 0.1 0.05 0.02 0.01 SINGLE PULSE PDM
0.1
NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC + TC 0.01 10-5 10-4 10-3 10-2 10-1 t, RECTANGULAR PULSE DURATION (s) 100 101
t1 t2
FIGURE 3. MAXIMUM TRANSIENT THERMAL IMPEDANCE
102 5s 10s ID, DRAIN CURRENT (A) 101
30 TJ = MAX RATED TC = 25oC SINGLE PULSE PD = 40W ID, DRAIN CURRENT (A) VGS = 20V 10V
PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX
100s 1ms
20
VGS = 8.0V VGS = 7.5V VGS = 7.0V VGS = 6.5V VGS = 6.0V VGS = 5.5V VGS = 5.0V VGS = 4.5V VGS = 4.0V 0 4 6 2 VDS, DRAIN TO SOURCE VOLTAGE (V) 8
100
OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON)
10ms 100ms DC
10
10-1 100
101 102 VDS, DRAIN TO SOURCE VOLTAGE (V)
103
0
FIGURE 4. FORWARD BIAS SAFE OPERATING AREA
FIGURE 5. OUTPUT CHARACTERISTICS
4-19
BUZ71A Typical Performance Curves
IDS(ON), DRAIN TO SOURCE CURRENT (A) 15 NORMALIZED ON RESISTANCE PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS = 25V TJ = 25oC 10
Unless Otherwise Specified (Continued)
0.4 VGS = 5V 5.5V 6V 6.5V 7V 7.5V 8V
0.3
0.2
9V 10V
5
0.1 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 0 0 5 10 15 20 ID, DRAIN CURRENT (A) 25
20V
0
0
5 VGS, GATE TO SOURCE VOLTAGE (V)
10
30
FIGURE 6. TRANSFER CHARACTERISTICS
FIGURE 7. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT
VGS(TH), GATE THRESHOLD VOLTAGE (V) 80 120 160
0.30 VGS = 10V, ID = 9A PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 0.20
4
VDS = VGS ID = 1mA
rDS(ON), DRAIN TO SOURCE ON RESISTANCE ()
3
2
0.10
1
0
-40
0
40
0
-50
0
50
100
150
TJ , JUNCTION TEMPERATURE (oC)
TJ, JUNCTION TEMPERATURE (oC)
FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE
FIGURE 9. GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE
101
6 gfs, TRANSCONDUCTANCE (S) 40 VGS = 0, f = 1MHz CISS = CGS +CGD CRSS = CGD COSS CDS + CGS
PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX o 5 VDS = 25V, TJ = 25 C 4 3 2 1 0
C, CAPACITANCE (nF)
100 CISS COSS 10-1 CRSS
10-2
0
10 20 30 VDS, DRAIN TO SOURCE VOLTAGE (V)
0
5 10 ID, DRAIN CURRENT (A)
15
FIGURE 10. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE
FIGURE 11. TRANSCONDUCTANCE vs DRAIN CURRENT
4-20
BUZ71A Typical Performance Curves
102 ISD, SOURCE TO DRAIN CURRENT (A) PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX
Unless Otherwise Specified (Continued)
15 VGS, GATE TO SOURCE VOLTAGE (V) ID = 18A
VDS = 10V 10 VDS = 40V
101 TJ = 150oC TJ = 25oC
100
5
10-1
0
0.5 1.0 1.5 2.0 2.5 VSD, SOURCE TO DRAIN VOLTAGE (V)
3.0
0
0
5
10
15
20
25
Qg, GATE CHARGE (nC)
FIGURE 12. SOURCE TO DRAIN DIODE VOLTAGE
FIGURE 13. GATE TO SOURCE VOLTAGE vs GATE CHARGE
Test Circuits and Waveforms
VDS BVDSS L VARY tP TO OBTAIN REQUIRED PEAK IAS VGS DUT tP RG IAS VDD tP VDS VDD
+
0V
IAS 0.01
0 tAV
FIGURE 14. UNCLAMPED ENERGY TEST CIRCUIT
FIGURE 15. UNCLAMPED ENERGY WAVEFORMS
tON td(ON) tr RL VDS
+
tOFF td(OFF) tf 90%
90%
RG DUT
-
VDD 0
10% 90%
10%
VGS VGS 0 10%
50% PULSE WIDTH
50%
FIGURE 16. SWITCHING TIME TEST CIRCUIT
FIGURE 17. RESISTIVE SWITCHING WAVEFORMS
4-21
BUZ71A Test Circuits and Waveforms
(Continued)
CURRENT REGULATOR
VDS (ISOLATED SUPPLY) VDD SAME TYPE AS DUT Qg(TOT) Qgd Qgs D VDS VGS
12V BATTERY
0.2F
50k 0.3F
G
DUT 0
Ig(REF) 0 IG CURRENT SAMPLING RESISTOR
S VDS ID CURRENT SAMPLING RESISTOR Ig(REF) 0
FIGURE 18. GATE CHARGE TEST CIRCUIT
FIGURE 19. GATE CHARGE WAVEFORMS
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Sales Office Headquarters
NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029
4-22

▲Up To Search▲

Price & Availability of BUZ71A

	To Download BUZ71A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .