 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 74LVQ32 Low Voltage Quad 2-Input OR Gate May 1998 74LVQ32 Low Voltage Quad 2-Input OR Gate General Description The LVQ32 contains four 2-input OR gates. Features n Ideal for low power/low noise 3.3V applications n Guaranteed simultaneous switching noise level and dynamic threshold performance n Guaranteed pin-to-pin skew AC performance n Guaranteed incident wave switching into 75 Ordering Code: Order Number 74LVQ32SC 74LVQ32SJ Package Number M14A M14D Package Description 14-Lead (0.150" Wide) Molded Small Outline Integrated Circuit, SOIC JEDEC 14-Lead Molded Small Outline Package, SOIC EIAJ Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol IEEE/IEC Connection Diagram Pin Assignment for SOIC JEDEC and EIAJ DS011346-1 DS011346-2 Pin Descriptions Pin Names An, Bn On Inputs Outputs Description (c) 1998 Fairchild Semiconductor Corporation DS011346 www.fairchildsemi.com Absolute Maximum Ratings (Note 1) Supply Voltage (VCC) DC Input Diode Current (IIK) VI = -0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = -0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND) Storage Temperature (TSTG) DC Latch-Up Source or Sink Current -0.5V to +7.0V -20 mA +20 mA -0.5V to VCC + 0.5V -20 mA +20 mA -0.5V to to VCC + 0.5V Recommended Operating Conditions (Note 2) Supply Voltage (VCC) LVQ Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 74LVQ Minimum Input Edge Rate (V/t) VIN from 0.8V to 2.0V VCC @ 3.0V 2.0V to 3.6V 0V to VCC 0V to VCC -40C to +85C 125 mV/ns 50 mA 200 mA -65C to +150C 100 mA Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol Parameter VCC (V) 3.0 3.0 3.0 3.0 3.0 3.0 3.6 3.6 3.6 3.6 3.3 3.3 3.3 3.3 0.5 -0.5 1.9 1.8 2.0 0.8 -0.8 2.0 0.8 0.002 TA = +25C Typ VIH VIL VOH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 1.5 1.5 2.99 2.0 0.8 2.9 2.58 0.1 0.36 TA = -40C to +85C Guaranteed Limits 2.0 0.8 2.9 2.48 0.1 0.44 V V V V V V A mA mA A V V V V VOUT = 0.1V or VCC - 0.1V VOUT = 0.1V or VCC - 0.1V IOUT = -50 A VIN = VIL or VIH (Note 3) IOH = -12 mA VOL Maximum Low Level Output Voltage IOUT = 50 A VIN = VIL or VIH (Note 3) IOL = 12 mA IIN IOLD IOHD ICC VOLP VOLV VIHD VILD Maximum Input Leakage Current Minimum Dynamic (Note 4) Output Current Maximum Quiescent Supply Current Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Maximum High Level Dynamic Input Voltage Maximum Low Level Dynamic Input Voltage VI = VCC, GND VOLD = 0.8V Max (Note 5) VOHD = 2.0V Min (Note 5) VIN = VCC or GND (Notes 6, 7) (Notes 6, 7) (Notes 6, 8) (Notes 6, 8) Units Conditions 0.1 1.0 36 -25 20.0 Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: Incident wave switching on transmission lines with impedances as low as 75 for commercial temperature range is guaranteed for 74LVQ. Note 6: Worst case package. Note 7: Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V; one output at GND. Note 8: Max number of Data Inputs (n) switching. (n - 1) inputs switching 0V to 3.3V. Input-under-test switching: 3.3V to threshold (VILD), 0V to threshold (VIHD), f = 1 MHz. www.fairchildsemi.com 2 AC Electrical Characteristics Symbol Parameter VCC (V) Min 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 1.5 1.5 1.5 1.5 TA = +25C CL = 50 pF Typ 8.4 7.0 8.4 7.0 1.0 1.0 Max 12.7 9.0 12.0 8.5 1.5 1.5 TA = -40C to +85C CL = 50 pF Min 1.5 1.5 1.0 1.5 Max 14.0 10.0 13.0 9.0 1.5 1.5 Units tPLH tPHL tOSHL, tOSLH Propagation Delay Propagation Delay Output to Output Skew (Note 9) ns ns ns Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH). Parameter guaranteed by design. Capacitance Symbol CIN CPD (Note 10) Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 17 Units pF pF Conditions VCC = Open VCC = 3.3V Note 10: CPD is measured at 10 MHz. 3 www.fairchildsemi.com 4 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead (0.150" Wide) Molded Small Outline Integrated Circuit Package Number M14A 5 www.fairchildsemi.com 74LVQ32 Low Voltage Quad 2-Input OR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Molded Small Outline Package, SOIC EIAJ Package Number M14D LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and (c) whose device or system, or to affect its safety or effectiveness. failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. Fairchild Semiconductor Corporation Americas Customer Response Center Tel: 1-888-522-5372 Fax: 972-910-8036 Fairchild Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 8 141-35-0 English Tel: +44 (0) 1 793-85-68-56 Italy Tel: +39 (0) 2 57 5631 Fairchild Semiconductor Hong Kong Ltd. 8/F Room 808 Empire Centre 68 Mody Road, Tsimshatsui East Kowloon, Hong Kong Tel: 852-2722-8338 Fax: 852-2722-8383 Fairchild Semiconductor Japan Ltd. 4F, Natsume BI, 2-18-6 Yushima, Bunkyo-ku, Tokyo 113-0034, Japan Tel: 81-3-3818-8840 Fax: 81-3-3818-8450 www.fairchildsemi.com Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. |
Price & Availability of 74LVQ32SC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |