Part Number Hot Search : 
TOP247F 025001 200001 TF14N50 SD1030T 80N15 A1600 000950
Product Description
Full Text Search
 

To Download 74VCX132 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 74VCX132 Low Voltage Quad 2-Input NAND Gate with Schmitt Trigger Inputs and 3.6V Tolerant Inputs and Outputs
July 1999 Revised July 1999
74VCX132 Low Voltage Quad 2-Input NAND Gate with Schmitt Trigger Inputs and 3.6V Tolerant Inputs and Outputs
General Description
The VCX132 contains four 2-input NAND gates with Schmitt Trigger Inputs. The pin configuration and function are the same as the VCX00 except the inputs have hysteresis between the positive-going and negative-going input thresholds. This hysteresis is useful for transforming slowly switching input signals into sharply defined, jitter-free output signals. This product should be used where noise margin greater than that of conventional gates is required. The VCX132 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. This product is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.
Features
s 1.65V-3.6V VCC supply operation s 3.6V tolerant inputs and outputs s tPD 3.3 ns max for 3.0V to 3.6V VCC 4.1 ns max for 2.3V to 2.7V VCC 8.2 ns max for 1.65V to 1.95V VCC s Power-off high impedance inputs and outputs s Static Drive (IOH/IOL) 24 mA @ 3.0V VCC 18 mA @ 2.3V VCC 6 mA @ 1.65V VCC s Uses patented Quiet SeriesTM noise/EMI reduction circuitry s Latchup performance exceeds 300 mA s ESD performance: Human body model > 2000V Machine model > 250V
Ordering Code:
Order Number 74VCX132M 74VCX132MTC Package Number M14A MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.
Logic Diagram
Connection Diagram
Pin Descriptions
Pin Name An , Bn On Description Inputs Outputs
Quiet SeriesTM is a trademark of Fairchild Semiconductor Corporation.
(c) 1999 Fairchild Semiconductor Corporation
ds500164
www.fairchildsemi.com
74VCX132
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) DC Input Voltage (VI) DC Output Voltage (VO) HIGH or LOW State (Note 2) VCC = 0V DC Input Diode Current (IIK) VI < 0V DC Output Diode Current (IOK) VO < 0V VO > VCC DC Output Source/Sink Current (IOH/IOL) DC VCC or Ground Current per Supply Pin (ICC or Ground) Storage Temperature (TSTG) -65C to +150C 100 mA -50 mA +50 mA 50 mA -50 mA -0.5V to VCC + 0.5V -0.5V to +4.6V -0.5V to +4.6V -0.5V to 4.6V
Recommended Operating Conditions (Note 3)
Power Supply Operating Data Retention Only Input Voltage Output Voltage (VO) HIGH or LOW State Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 2.3V Free Air Operating Temperature (TA) 24 mA 18 mA 6 mA -40C to +85C 0V to VCC 1.65V to 3.6V 1.2V to 3.6V -0.3V to 3.6V
Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: IO Absolute Maximum Rating must be observed. Note 3: Floating or unused inputs must be held HIGH or LOW.
DC Electrical Characteristics (2.7V < VCC 3.6V)
Symbol Vt+ Vt- VH VOH Parameter Positive Threshold Negative Threshold Input Hysteresis HIGH Level Output Voltage IOH = -100 A IOH= -12 mA IOH = -18 mA IOH = -24mA VOL LOW Level Output Voltage IOL = 100 A IOL = 12 A IOL = 18 mA IOL = 24 mA II IOFF ICC ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current Increase in ICC per Input 0 VI 3.6V 0 (VI, VO) 3.6V VI = VCC or GND VCC VI 3.6V VIH = VCC - 0.6V Conditions VCC (V) 3.6 3.0 3.6 3.0 3.6 3.0 2.7-3.6 2.7 3.0 3.0 2.7-3.6 2.7 3.0 3.0 2.7-3.6 0 2.7-3.6 2.7-3.6 2.7-3.6 0.8 0.7 0.3 0.3 VCC-0.2 2.2 2.4 2.2 0.2 0.4 0.4 0.55 15.0 10 20 20 750 A A A A V V 1.2 1.2 Min Max 2.2 2.0 Units V V V
www.fairchildsemi.com
2
74VCX132
DC Electrical Characteristics (2.3V VCC 2.7V)
Symbol Vt+ Vt- VT VOH Parameter Positive Threshold Negative Threshold Input Hysteresis HIGH Level Output Voltage IOH = -100 A IOH= -6 mA IOH = -12 mA IOH = -18 mA VOL LOW Level Output Voltage IOL = 100 A IOL = 12 A IOL = 18 mA II IOFF ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current 0 VI 3.6V 0 (VI, VO) 3.6V VI = V CC or GND VCC VI 3.6V Conditions VCC (V) 2.3 2.3 2.3 2.3-2.7 2.3 2.3 2.3 2.3-2.7 2.3 2.3 2.3-2.7 0 2.3-2.7 2.3-2.7 0.5 0.3 VCC-0.2 2.0 1.8 1.7 0.2 0.4 0.6 5.0 10 20 20 A A A V V 1.0 Min Max 1.6 Units V V V
DC Electrical Characteristics (1.65V VCC < 2.3V)
Symbol Vt+ Vt- VT VOH VOL II IOFF ICC Parameter Positive Threshold Negative Threshold Input Hysteresis HIGH Level Output Voltage LOW Level Output Voltage Input Leakage Current Power Off Leakage Current Quiescent Supply Current IOH = -100 A IOH= -6 mA IOL = 100 A IOL = 6 mA 0 VI 3.6V 0 (VI, VO) 3.6V VI = V CC or GND VCC VI 3.6V Conditions VCC (V) 1.65 1.65 1.65 1.65-2.3 1.65 1.65-2.3 1.65 1.65-2.3 0 1.65-2.3 1.65-2.3 0.25 0.2 VCC-0.2 1.25 0.2 0.3 5.0 10 20 20 0.9 Min Max 1.3 Units V V V V V A A A
AC Electrical Characteristics (Note 4)
TA = -40C to +85C, CL = 30 pF, RL = 500 Symbol tPHL tPLH tOSHL tOSLH Output to Output Skew (Note 5) 0.5 0.5 0.75 ns Parameter Propagation Delay VCC = 3.3 V 0.3V Min 0.6 Max 3.3 VCC = 2.5 V 0.2V Min 0.8 Max 4.1 VCC = 1.8 V 0.15V Min 1.0 Max 8.2 ns Units
Note 4: For CL = 50 pF, add approximately 300 ps to the AC maximum specification. Note 5: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).
3
www.fairchildsemi.com
74VCX132
Dynamic Switching Characteristics
Symbol VOLP Parameter Quiet Output Dynamic Peak VOL VOLV Quiet Output Dynamic Valley VOL VOHV Quiet Output Dynamic Valley VOH CL = 30 pF, VIH = VCC, VIL = 0V CL = 30 pF, VIH = VCC, VIL = 0V Conditions CL = 30 pF, VIH = VCC, VIL = 0V VCC (V) 1.8 2.5 3.3 1.8 2.5 3.3 1.8 2.5 3.3 TA = +25C Typical 0.25 0.6 0.8 -0.25 -0.6 -0.8 1.5 1.9 2.2 V V V Units
Capacitance
Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance Parameter Conditions VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V VI = 0V or VCC, f = 10MHz, VCC = 1.8V, 2.5V or 3.3V TA = +25C Typical 6 7 20 pF pF pF Units
AC Loading and Waveforms
FIGURE 1. AC Test Circuit
TEST tPLH, tPHL SWITCH Open
FIGURE 2. Waveform for Inverting and Non-inverting Functions
VCC 3.3V 0.3V 1.5V 1.5V 2.5V 0.2V VCC/2 VCC/2 1.8V 0.15V VCC/2 VCC/2
Symbol Vmi Vmo
www.fairchildsemi.com
4
74VCX132
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150" Narrow Package Number M14A
5
www.fairchildsemi.com
74VCX132 Low Voltage Quad 2-Input NAND Gate with Schmitt Trigger Inputs and 3.6V Tolerant Inputs and Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com


▲Up To Search▲   

 
Price & Availability of 74VCX132

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X