|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NON-ISOLATED DC/DC CONVERTERS 12V Input / 0.9V - 5.0V Output / 15A V7PF-15A Series * * * * PRELIMINARY Industry standard pinout High efficiency means less power dissipation Remote on/off Overcurrent protection Description The V7PF-15A Series are non-isolated step down DC/DC converters that operate from a nominal 12V source. These converters are available in a range of output voltages from 0.9V to 5.0V. They are packaged in an industry standard single-in-line footprint and provide a maximum 15A output. Standard features include remote on/off, over current protection, thermal protection, output voltage adjust and remote sense. These products maybe used almost anywhere lowvoltage silicon is being employed and a 12V source is available. Typical applications include file servers, routers, line cards, and other computing and communications equipment. Part Selection Output Voltage 0.9 - 5.0V 1.2 - 5.0V Input Voltage 12V 12V Max. Output Current 15A 15A Max. Output Power 75W 75W Typical Eff. (5V out) 92% 92% Model Number V7PF-15A1A0 V7PF-15A1AC Input Specifications Parameter Input Voltage Range Input Current (full load) Reflected Ripple Current Min 10.8VDC Typ Max 13.2 VDC 6.9A 120mA p-p Notes At 5.0V out, full load With a simulated source impedance of 1500nH, 5Hz to 20 MHz Output Specifications Parameter Output Current Setpoint Accuracy Total Regulation 5V 2.5V 1.2V 0.9V Ripple and Noise 50mV pk-pk / 25mV rms Output Capacitance 5V 2.5V 1.2V 0.9V 680uF 5080uF 7640uF 9680uF 11000uF Min 0A -2% Typ Max 15A +2% 55mV 33mV 21mV 17mV Notes Regulation over all operating conditions and temperatures. 0 to 20MHz Bandwidth Tested with .01uF Ceramic, 10uF Al and 680uF OSCON capacitors on output. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 12V Input / 0.9V - 5.0V Output / 15A Output Specifications (continued) Parameter Transient Response Max deviation Recovery to within 1% Min Typ Max 100mV 200uS Notes di/dt = 0.1A/uS, Vin =12VDC Ta = 25C, 50-100% load change, Cout = 680uF. General Specifications Parameter Switching Frequency Dimensions inches mm Weight Operating Temperature Non-Operating Temperature Protection Features Short circuit Over current Undervoltage Remote On/Off Efficiency 5V 2.5V 1.2V Specification 200kHz typical (fixed) 1.20 x 1.00 x 0.46 30.5 x 25.4 x 11.6 14.2 g 0C to 80C (see curve) -40C to 125C Continuous 130% to 250% max Io UVLO Vin < 9.8V Active High 92% 87% 79% Pin Connections Pin 1 2 3 4 5 6 7 8 9 10 11 Function Vout Vout Vout Trim Output Enable Power Good GND GND Reserved Vin Vin Derating Curves 15 12 Output Current 9 6 3 0 0 20 40 Ambient Temp 0LFM 200LFM 400LFM 60 80 (c) 2003 Bel Fuse Inc. Specifications subject to change without notice. 011703 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com |
Price & Availability of V7PF-15A1A0 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |