View USB002_1107151.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

05244
USB002
STEERING DIODE ARRAY
APPLICATIONS
USB Interface Ports Cellular Phones Video Handheld Electronics Personal Computers
IEC COMPATIBILITY (EN61000-4)
61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns
SOT-543
FEATURES
ESD Protection > 40 kilovolts 225 Milliwatt Continuous Power Dissipation Provides Two (2) Lines of Protection Low Leakage Current < 1.0A Ultra Low Capacitance: 0.6pF RoHS Compliant
MECHANICAL CHARACTERISTICS
Molded JEDEC SOT-543 Weight 3 milligrams (Approximate) Available in Lead-Free Nickel-Paladium-Gold Plating Solder Reflow Temperature: Nickel-Paladium-Gold (Ni/Pd/Au) Sn/Ag/Cu: 260-270C Flammability Rating UL 94V-0 8mm Tape and Reel Per EIA Standard 481 Marking: Marking Code
PIN CONFIGURATION
VN
1
4
VP
I/O 1
2
3
I/O 2
05244.R0 1/07
1
www.protekdevices.com
USB002
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER
Operating Temperature Storage Temperature Continuous Power Dissipation Repetitive Peak Forward Current @ tp = 5s, F = 50kHz (Pin 1-2)
SYMBOL
TJ TSTG PPC IFRM
VALUE
-55 to 150 -55 to 150 225 700
UNITS
C C mW mA
ELECTRICAL CHARACTERISTICS PER LINE
PART NUMBER DEVICE MARKING CODE REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) @ 10A VRRM VOLTS 20
@ 25C Unless Otherwise Specified MAXIMUM DIODE FORWARD VOLTAGE @ 10mA VF VOLTS 1.4 MAXIMUM CAPACITANCE (See Note 3 ) (Between Line-Gnd)
MAXIMUM REVERSE LEAKAGE CURRENT (See Note 2) VRRM @ 5V IR A 1
Cj pF 0.6
USB002
U2
Note 1: VP - VN = 20V. Note 2: VP - VN = 5.5V. Note 3: Between Line and Ground - VP = 5V, f = 1MHz, VI/O = 2.5V, VN = 0V.
FIGURE 1 PEAK FORWARD CURRENT VS FORWARD VOLTAGE
IF - Forward Current - A
1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.500
1.000
1.500
2.000
VF - Forward Voltage - V
05244.R0 1/07
2
www.protekdevices.com
USB002
SOT-543 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE PACKAGE DIMENSIONS
A
C
K
DIM
A B C D G H J K
NOTES
MILLIMETERS MIN MAX
1.50 1.10 0.50 0.17 0.50 BSC 1.50 0.08 0.10 1.70 1.30 0.60 0.27 1.70 0.16 0.30
INCHES MIN MAX
0.059 0.043 0.020 0.007 0.020 BSC 0.059 0.003 0.004 0.067 0.051 0.024 0.011 0.067 0.007 0.012
4
3 B H
1
2
G
D
J
1. 2. 3. 4.
Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs.
MOUNTING PAD
TYPICAL DIM Millimeters Inches 1 2 3 4 0.30 1.02 1.40 0.51 0.012 0.040 0.055 0.020
TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., USB002-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., USB002-T13. 4. Suffix - LF = Lead-Free Plating, i.e., USB002-LF-T7.
3
2
4
1
Outline & Dimensions: Rev 0 - 1/07, 06070
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia. 178mm (7") Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25
1.78 0.05 1.78 0.05 0.69 0.05 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10
P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2
E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot
F
W
P
User Direction of Feed
COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
www.protekdevices.com
05244.R0 1/07
3

▲Up To Search▲

Price & Availability of USB002

	To Download USB002 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .