 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTEGRATED CIRCUITS SA3603 Cellular-band low voltage front-end Preliminary specification IC17 Data Handbook 1999 Dec 17 Philips Semiconductors Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 DESCRIPTION The SA3603 is an integrated Low-Noise Amplifier (LNA) and mixer designed in a 30 GHz fT advanced BICMOS process, Qubic3, for high-performance low power Cellular-band communication systems. The LNA has a 1.6 dB noise figure at 881 MHz with 17.5 dB gain and an IIP3 intercept of -4 dBm. The single-ended input, single balanced mixer has a 9.5 dB noise figure with 7.5 dB gain and IIP3 of +6.0 dBm at 881 MHz. PIN CONFIGURATION 1 2 3 4 5 6 7 8 16 VCC MIXER 15 MIXER IF OUT- 14 MIXER IF OUT+ 13 GND 12 MIXER RF IN 11 GND 10 LNA RF OUT 9 LNA GAIN Sel LO IN VCC LO Buffer LO OUT GND VCC LNA GND LNA RF IN GND FEATURES * Integrated LNA output matching * Excellent gain stability versus temperature and supply voltage * LNA, mixer and LO buffer power down capability APPLICATIONS SR02104 * IS-136 Standard systems * Wireless radios ORDERING INFORMATION DESCRIPTION 16-Pin Thin Shrink Small Outline Package (Surface-mount, TSSOP) Figure 1. Pin Configuration TEMPERATURE RANGE -40 to +85C ORDER CODE SA3603 DH DWG # 1999 Dec 17 2 Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 PINOUT DEFINITION 1 2 3 4 5 6 7 8 16 VCC MIXER 15 MIXER IF OUT- 14 MIXER IF OUT+ 13 GND 12 MIXER RF IN 11 GND 10 LNA RF OUT 9 LNA GAIN Sel LO IN VCC LO Buffer LO OUT GND VCC LNA GND LNA RF IN GND SR02247 Figure 2. Pinout definition PIN DESCRIPTION PIN NUMBER 1 2 3 4, 6, 8, 11, 13 5 7 9 10 12 14 15 16 SYMBOL LO_IN VCC LO BUFFER LO OUT GND VCC LNA LNA RF IN LNA GAIN SEL LNA RF OUT MIXER RF IN MIXER IF OUT+ MIXER IF OUT- VCC MIXER VCO input LO buffer supply voltage VCO output Ground LNA supply voltage LNA input LNA gain select LNA output Mixer input Mixer output + Mixer output - Mixer supply voltage FUNCTION 1999 Dec 17 3 Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 ABSOLUTE MAXIMUM RATINGS SYMBOL VCC VIN PD TJMAX PMAX TSTG Supply voltage1 Voltage applied to any other pin Power dissipation, Tamb = 25C (still 16-Pin Plastic TSSOP air)2 TBD 150 +20 -65 to +150 mW C dBm C PARAMETER RATING -0.3 to +3.5 -0.3 to (VCC + 0.3) UNITS V V Maximum operating junction temperature Maximum power input/output Storage temperature range NOTES: 1. Transients exceeding 3.6 V on VCC pin may damage product. 2. Maximum dissipation is determined by the operating ambient temperature and the thermal resistance, JA: 16-Pin TSSOP = TBDC/W 3. Pins 14 and 15 are ESD sensitive (mixer outputs). RECOMMENDED OPERATING CONDITIONS SYMBOL VCC Tamb Supply voltage Operating ambient temperature range PARAMETER RATING 2.7 to 3.3 -40 to +85 UNITS V C DC ELECTRICAL CHARACTERISTICS VCC = +2.8 V, Tamb = 25C; unless otherwise stated. LIMITS SYMBOL PARAMETER TEST CONDITIONS MIN LO buffer ICC Supply current LNA high gain Mixer VIH VIL IBIAS Logic 1 level Logic 0 level Input bias current Logic 1 or 0 2.0 -0.3 -5 TYP 6 6 12 VCC + 0.3 0.5 +5 MAX mA mA mA V V A UNITS 1999 Dec 17 4 Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 AC ELECTRICAL CHARACTERISTICS VCC = +2.8 V; fRF = 881 MHz, fVCO = 991 MHz; Tamb = 25C; unless otherwise stated. LIMITS SYMBOL Overall System GSYS System gain LNA + Mixer (excluding filter loss) 22 dB PARAMETER TEST CONDITIONS MIN. -3 TYP +3 MAX. UNITS Low Noise Amplifier fRF S21 S21 S12 S11 S22 P-1dB IIP3 NF tON/OFF Mixer fRF fIF PGC S11M NFM P-1dB IIP3M IIP2INT PRFM-IF tON/OFF LO Buffer fLO PIN POUT S11 S22 PLO-IF PLO-RFM PLO-RF tON/OFF Input frequency range Input power Output power Input return loss Output return loss LO feedthrough to IF LO to mixer input feedthrough LO to LNA input feedthrough Harmonic content Turn on/off time1 NOTE: 1. External circuit dependent 50 system 50 system 939 -2 0 0 10 10 TBD TBD TBD -20 100 1094 +2 MHz dBm dBm dB dB dBm dBm dBm dB s RF input frequency range IF input frequency range Power conversion gain Input match SSB noise figure Input 1 dB gain compression Input third order intercept Input second order intercept RF feedthrough Turn on/off time1 PRFin = -35 dBm PRFin = -27 dBm, 60 kHz offset fIF = 110 MHz Ext. impedance matching req. 869 70 110 7.5 -10 9.5 -15 6 26 TBD 100 894 200 MHz MHz dB dB dB dBm dBm dBm dBm s RF input frequency range Gain Gain in power-down mode Reverse isolation Input return loss Output return loss Input 1 dB gain compression Input third order intercept Noise figure Turn on/off time1 PRFin = -35 dBm, 60 kHz offset @ 881 MHz 50 system 50 system 869 17.5 2 TBD 10 10 -19 -4 1.6 100 894 MHz dB dB dB dB dB dBm dBm dB s 1999 Dec 17 5 Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 1999 Dec 17 6 Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 NOTES 1999 Dec 17 7 Philips Semiconductors Preliminary specification Cellular-band low voltage front-end SA3603 Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 2000 All rights reserved. Printed in U.S.A. Date of release: 04-00 Document order number: 9397 750 07035 Philips Semiconductors 1999 Dec 17 8 |
Price & Availability of SA3603
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |