View FP207_1048068.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6457
PNP/NPN Epitaxial Planar Silicon Transistors
FP207
Push-Pull Circuit Applications
Features
* Composite type with a PNP transistor and an NPN transistor contained in one package, facilitating highdensity mounting. * Each device incorporated in the FP207 is equivalent to the 2A1729 and to the 2SC4520, respectively.
Package Dimensions
unit:mm 2097B
4.5 3.4 2.8 0.5 1.8 0.5 7 6 1.0 0.5 1.57
[FP207]
1.5 0.4
4.25max
2.5
0.5
1.0
5 1.75
4 3
2
1
0.2min
0.3
0 to 0.1 0.2
1.75 3.5 1.2
Specifications
( ) : PNP Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Total Power Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC PT Tj Tstg Conditions
1 : Base 1 (PNP TR) 2 : Collector 1 (PNP TR) 3 : Emitter Common 4 : Collector 2 (NPN TR) 5 : Base 2 (NPN TR) 6 : Collector 2 (NPN TR) 7 : Collector 1 (PNP TR) SANYO : PCP5 (Top view)
0.7
Ratings (-)50 (-)40 (-)5 (-)1.5 (-)3 300
Unit V V V A A mA W W C
C
Mounted on a ceramic board (250mm2x0.8mm) 1unit Mounted on a ceramic board (250mm2x0.8mm)
0.8 1.1 150 -55 to +150
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)40V, IE=0 VEB=(-)3V, IC=0 VCE=(-)2V, IC=(-)100mA VCE=(-)2V, IC=(-)100mA VCB=(-)10V, f=1MHz 100 300 (18)13 Conditons Ratings min typ max (-)1 (-)1 400 MHz pF Unit A A
Marking : 207
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
92500TS (KOTO) TA-2925 No.6457-1/5
FP207
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) Conditons IC=(-)800mA, IB=(-)40mA Ratings min typ (-0.3) 0.25 (-)0.9 (-)50 (-)40 (-)5 (50) 50 (120) 150 (30)30 (100) 100 (220) 270 (80)80 max (-0.8) 0.7 (-)1.3 Unit mV mV V V V V ns ns ns ns ns
IC=(-)800mA, IB=(-)40mA V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)10A, IC=0 ton tstg tf See specified Test Circuit See specified Test Circuit See specified Test Circuit
Electrical Connection (Top view)
C1 C2
Switching Time Test Circuit
IB1 IB2 RB VR + 50 100F 470F VCC=25V OUTPUT
INPUT PW=20s D.C.1%
RL +
C1 B1 EC
C2 B2 VBE=--5V (For PNP, the polarity is reversed.) 10IB1= --10IB2= IC=400mA
--1.0
IC -- VCE
A --8m
-7mA
--6mA
[PNP]
1.0
IC -- VCE
4.0mA 3.5mA
[NPN]
Collector Current, IC - A
Collector Current, IC - A
--0.8
--5mA
--4mA
0.8
3.0mA 2.5mA
--0.6
0.6
--3mA
--0.4
2.0mA
0.4
1.5mA
--2mA
--0.2
1.0mA
0.2
--1mA
0.5mA
0 --5 IT01846 0 1 2 3
0 0 --1 --2 --3
IB=0
--4
IB=0
4 5 IT01847
Collector-to-Emitter Voltage, VCE - V
--1.6
Collector-to-Emitter Voltage, VCE - V
1.6
IC -- VBE
VCE= --2V
[PNP]
IC -- VBE
VCE=2V
[NPN]
--1.4
1.4
Collector Current, IC - A
Collector Current, IC - A
--1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01848
1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT01849
C 25C
--25C
Ta=7 5
Ta=7 5
25C
C
Base-to-Emitter Voltage, VBE - V
Base-to-Emitter Voltage, VBE - V
--25C
No.6457-2/5
FP207
1000 7 5 3 2
hFE -- IC
[PNP]
1000
hFE -- IC
[NPN] VCE=2V
VCE= --2V
7 5
DC Current Gain, hFE
DC Current Gain, hFE
Ta=75C 25C
--25C
3 2
Ta=75C 25C --25C
100 7 5 3 2
100 7 5
3 10 --0.01 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3
Collector Current, IC - A
100 7
IT01850
Collector Current, IC - A
7
IT01851
Cob -- VCB
[PNP] f=1MHz
5
Cob -- VCB
[NPN] f=1MHz
Output Capacitance, Cob - pF
5
Output Capacitance, Cob - pF
3 2
3
2
10 7 5
10 7 5 5 7 --1.0 2 3 5 7 --10 2 3 5
3 5 7 1.0 2 3 5 7 10 2 3 5
Collector-to-Base Voltage, VCB - V
5
IT01852
Collector-to-Base Voltage, VCB - V
7
IT01853
f T -- IC
[PNP] VCE= --2V
5
f T -- IC
[NPN] VCE=2V
Gain-Bandwidth Product, f T - MHz
3
Gain-Bandwidth Product, f T - MHz
3 2
2
100 7 5
100 7 5
3 5 7 --10 2 3 5 7 --100 2 3 5
3
Collector Current, IC - A
--1000
7 --1000 IT01854
7
10
2
3
5
7 100
2
3
5
Collector Current, IC - A
1000
7 1000 2 IT01855
VCE(sat) -- IC
[PNP] IC / IB=20
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
7 5
VCE(sat) -- IC
[NPN] IC / IB=20
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
7 5
3 2
3 2
--100 7 5 3 --0.01
C 75 Ta= C --25
C 25
100 7 5
Ta= --25C
75C
5 7 0.01 2 3 5
25C
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
7 0.1
2
3
5
7 1.0
2
3
Collector Current, IC - A
IT01856
Collector Current, IC - A
IT01857
No.6457-3/5
FP207
5
VBE(sat) -- IC
[PNP]
5
VBE(sat) -- IC
[NPN] IC / IB=20
IC / IB=20
Base-to-Emitter Saturation Voltage, VBE (sat) - V
Base-to-Emitter Saturation Voltage, VBE (sat) - V
3
3
2
2
100
Ta= --25C
7 5
25C
1.0 7 5
Ta= --25C
75C
25C
75C
3 --0.01
3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3
Collector Current, IC - A
5 3 2
IT01858
Collector Current, IC - A
5 3
IT01859
SW Time -- IC
[PNP]
SW Time -- IC
[NPN]
Switching Time, SW Time - ns
Switching Time, SW Time - ns
VCC= --25V IC=20IB1= --20IB2
VCC=25V IC=20IB1= --20IB2
tstg
tstg
2
100 7 5 3 2
ton tf
100 7 5
ton
tf
3 2
10 --0.1
2
3
5
7
Collector Current, IC - A
--1.0
2 IT01860
10 0.1
2
3
5
7
Collector Current, IC - A
1.0
2 IT01861
7 5 3
ASO
Collector Dissipation, PC (TR2) - W
ICP=3A IC=1.5A
10
10 m s
1.0
PC(TR2) -- PC(TR1)
Collector Current, IC - A
2 1.0 7 5 3 2 0.1 7 5 3 2
0.8
1m s
0m
s
DC
0.6
op
era
tio
n
0.4
Ta=25C Single pulse For PNP, the minus sign is omitted. 1unit Mounted on a ceramic board(250mm2x0.8mm)
5 7 1.0 2 3 5 7 10 2 3 5 7
0.2
0 IT01862
Mounted on a ceramic board(250mm2x0.8mm)
0 0.2 0.4 0.6 0.8 1.0 IT01863
Collector-to-Emitter Voltage, VCE - V
1.2 1.1
Collector Dissipation, PC (TR1) - W
PC -- Ta
Collector Dissipation, PC - W
1.0
0.8
To t
1u
al
di
0.6
ss
ip
nit
at
io
n
0.4
0.2
0
Mounted on a ceramic board(250mm2x0.8mm)
0 20
Ambient Temperature, Ta - C
40
60
80
100
120
140
160
IT01864
No.6457-4/5
FP207
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of September, 2000. Specifications and information herein are subject to change without notice.
PS No.6457-5/5

▲Up To Search▲

Price & Availability of FP207

	To Download FP207 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .