View HCPL4503M06_1031313.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HCPL4503M High Speed Transistor Optocouplers
October 2006
HCPL4503M High Speed Transistor Optocouplers
Features
VISO = 5kV RMS is standard for all devices High speed - 1MBit/s Superior CMR, CMH = 50kV/ms (typical);
Description
The HCPL4503M optocoupler consists of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The base of the phototransistor is not bonded out to a pin for improved noise immunity. An internal noise shield provides superior common mode rejection of 15kV/s minimum.
CML = 30kV/ms (typical) No base connection for improved noise immunity CTR guaranteed 0-70C U.L. recognized (File # E90700, Vol 2) VDE approval pending
Applications
Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling
Package
Schematic
8 1
N/C 1
8 VCC
+2 V
F
7 N/C
_
3
6 VO
8 1
8 1
N/C 4
5 GND
(c)2005 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
HCPL4503M Rev. 1.0.2
HCPL4503M High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25C unless otherwise specified)
Symbol
TSTG TOPR TSOL EMITTER IF (avg) IF (pk) IF (trans) VR PD DETECTOR IO (avg) IO (pk) VCC VO PD Average Output Current Peak Output Current Supply Voltage Output Voltage Output power dissipation 8 16 -0.5 to 30 -0.5 to 20 100 mA mA V V mW DC/Average Forward Input Current Peak Forward Input Current (50% duty cycle, 1ms P.W.) Peak Transient Input Current - (1s P.W., 300pps) Reverse Input Voltage Input Power Dissipation 25 50 1.0 5 100 mA mA A V mW
Parameter
Storage Temperature Operating Temperature Lead Solder Temperature
Value
-40 to +125 -40 to +100 260 for 10 sec
Units
C C C
2 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70C Unless otherwise specified)
Individual Component Characteristics
Symbol
EMITTER VF BVR VF / TA DETECTOR IOH Logic high output current IF = 0mA, VO = VCC = 5.5V, TA = 25C IF = 0mA, VO = VCC = 15V, TA = 25C IF = 0mA, VO = VCC = 15V ICCL ICCH Logic low supply current Logic high supply current IF = 16mA, VO = Open, VCC = 15V IF = 0mA, VO = Open, VCC = 15V, TA = 25C IF = 0mA, VO = Open, VCC = 15V ** All Typicals at TA = 25C 120 0.001 0.005 0.5 1 50 200 1 2 A A A Input Forward Voltage Input Reverse Breakdown Voltage Temperature Coefficient of forward voltage IF = 16mA, TA = 25C IF = 16mA IR = 10A IF = 16mA 5.0 -1.6 1.45 1.7 1.8 V mV/C V
Parameter
Test Conditions
Min.
Typ.**
Max.
Unit
Transfer Characteristics (TA = 0 to 70C Unless otherwise specified)
Symbol
COUPLED CTR Current Transfer Ratio(5) IF = 16mA, VO = 0.4V, VCC = 4.5V, TA = 25C(1) IF = 16mA, VCC = 4.5V, VOL = 0.5V VOL Logic low output voltage output voltage IF = 16mA, IO = 3 mA, VCC = 4.5V, TA = 25C IF = 16mA, IO = 2.4mA, VCC = 4.5V ** All Typicals at TA = 25C Note: 1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 19 15 27 30 0.5 0.5 V 50 %
Parameter
Test Conditions
Min.
Typ.**
Max.
Unit
3 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Switching Characteristics (TA = 0 to 70C unless otherwise specified., VCC = 5V)
Symbol
TPHL
Parameter
Propagation Delay Time to Logic Low Propagation Delay Time to Logic High Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low
Test Conditions
RL = 1.9k, IF = TA = 25C 16mA(2) (Fig. 7)
Min.
Typ.**
0.45
Max.
0.8 1.0
Unit
s s s s V/s
RL = 1.9k, IF = 16mA(2) (Fig. 7) TPLH RL = 1.9k, IF = 16mA(2) (Fig. 7) TA = 25C RL = 1.9k, IF = 16mA(2) (Fig. 7) |CMH| IF = 0 mA, VCM = 1,500VP-P, TA = 25C, RL = 1.9k(3)(Fig. 8) IF = 16mA, VCM = 1,500VP-P, RL = 1.9k(3) (Fig. 8) 15,000 50,000 0.3
0.8 1.0
|CML|
15,000
30,000
V/s
** All Typicals at TA = 25C
Isolation Characteristics (TA = 0 to 70C Unless otherwise specified)
Symbol
II-O
Characteristics
Input-Output Insulation Leakage Current Withstand Insulation Test Voltage Resistance (input to output) Capacitance (input to output)
Test Conditions
Relative humidity = 45%, TA = 25C, t = 5s, VI-O = 3000VDC(4) RH 50%, TA = 25C, II-O 2A, t = 1 min.(4) VI-O = 500VDC f = 1MHz(4)
Min.
Typ.**
Max.
1.0
Unit
A
VISO RI-O CI-O
5,000 1012 0.6
VRMS pF
Notes: 2. The 1.9 k load represents 1 TTL unit load of 1.6 mA and 5.6 k pull-up resistor. 3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8V). 4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together.
4 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Fig. 1 Normalized CTR vs. Forward Current
1.2 1.2
Fig. 2 Normalized CTR vs. Temperature
1.0
1.0
NORMALIZED CTR
0.8
NORMALIZED CTR
0.8
0.6
0.6
0.4 Normalized to: IF = 16 mA 0.2 VO = 0.4 V VCC = 5 V TA = 25C
0.4 Normalized to: TA = 25C 0.2 IF = 16mA VCC = 5 V VO = 0.4 V
0.0 0.1
1
10
100
0.0 -60
-40
-20
0
20
40
60
80
100
IF - FORWARD CURRENT (mA)
TA - TEMPERATURE (C)
Fig. 3 Output Current vs. Output Voltage
16 14 TA = 25C VCC = 5 V IF = 40 mA IF = 35 mA 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF = 30 mA IF = 25 mA IF = 20 mA IF = 15 mA IF = 10 mA IF = 5 mA 1000
Fig. 4 Logic High Output Current vs. Temperature
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
IF = 0 mA VCC = 5 V VO = 5 V 100
IO - OUTPUT CURRENT (mA)
10
1
0.1 -60
-40
-20
0
20
40
60
80
100
VO - OUTPUT VOLTAGE (V)
TA - TEMPERATURE (C)
Fig. 5 Propagation Delay vs. Temperature
800 700 10000
Fig. 6 Propagation Delay vs. Load Resistance
Tp - PROPAGATION DELAY (ns)
600 500 400 300 200
RL = 4.1 K (TPLH)
TP - PROPAGATION DELAY (ns)
RL = 4.1 K (TPLH)
IF - 16 mA (TPHL) IF - 10 mA (TPHL) 1000
IF - 16 mA (TPLH)
RL = 1.9 K (TPHL) 100 0 -60
RL = 1.9 K (TPLH)
IF = 16 mA VCC = 5 V
IF - 10 mA (TPLH) -40 -20 0 20 40 60 80 100 100 1
VCC = 5 V TA = 25C
10
TA - TEMPERATURE (C)
RL = LOAD RESISTANCE (k)
5 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Fig. 7 Switching Time Test Circuit
Noise Shield
Pulse Generator tr = 5ns Z O = 50 10% D.C. I/f < 100s
1
IF +
8 7 6 5
VCC
+5 V
2
VF -
N/C VO
RL
3
I F Monitor Rm
VO 0.1 F
4
GND
C L = 1.5 F
IF 0
VO
5V
1.5 V
1.5 V VOL
TPHL
TPLH
Fig. 8 Common Mode Immunity Test Circuit
IF Noise Shield
1
+
8 7 6 5
VCC
+5 V
2
A B VFF VF -
N/C VO
RL
3 4
+
VCM
VO 0.1 F
GND
-
-
Pulse Gen
VCM 10 V 10% tr
90%
90% 10% tf
0V
VO Switch at A : IF = 0 mA VO Switch at A : IF = 16 mA
5V
VOL
6 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Package Dimensions
Through Hole
PIN 1 ID.
4 3 2 1
Surface Mount
0.390 (9.91) 0.370 (9.40)
4 3 2 1
0.270 (6.86) 0.250 (6.35)
5 6 7 8
PIN 1 ID.
0.270 (6.86) 0.250 (6.35)
0.390 (9.91) 0.370 (9.40)
5
6
7
8
SEATING PLANE
0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.140 (3.55) 0.020 (0.51) MIN
0.070 (1.78) 0.045 (1.14) 0.020 (0.51) MIN
0.300 (7.62) TYP 0.016 (0.41) 0.008 (0.20)
0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 15 MAX 0.300 (7.62) TYP
0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP Lead Coplanarity : 0.004 (0.10) MAX
0.045 [1.14] 0.315 (8.00) MIN 0.405 (10.30) MIN
0.4" Lead Spacing
4 3 2 1
8-Pin DIP
PIN 1 ID.
0.070 (1.78)
0.270 (6.86) 0.250 (6.35)
0.060 (1.52)
5 6 7 8
0.390 (9.91) 0.370 (9.40)
0.100 (2.54) 0.295 (7.49)
0.070 (1.78) 0.045 (1.14)
SEATING PLANE
0.415 (10.54)
0.030 (0.76)
0.200 (5.08) 0.140 (3.55)
0.004 (0.10) MIN
0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 0 to 15 0.400 (10.16) TYP
Note: All dimensions are in inches (millimeters)
7 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Ordering Information
Option
S SD T V TV SV SDV
Example Part Number
HCPL4503M HCPL4503SM HCPL4503SDM HCPL4503TM HCPL4503VM HCPL4503TVM HCPL4503SVM HCPL4503SDVM
Description
Standard Through Hole Surface Mount Lead Bend Surface Mount; Tape and Reel 0.4" Lead Spacing VDE0884 VDE0884; 0.4" Lead Spacing VDE0884; Surface Mount VDE0884; Surface Mount; Tape and Reel
Marking Information
1
4503 V
3 4
2 6
XX YY TB
5
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) Two digit year code, e.g., `03' Two digit work week ranging from `01' to `53' Assembly package code
8 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
Carrier Tape Specifications
K0
t
P0
P2
D0 E
A0 W1 B0
F W
d
User Direction of Feed
P
D1
Symbol
W t P0 D0 E F P2 P A0 B0 K0 W1 d R Tape Width
Description
Tape Thickness Sprocket Hole Pitch Sprocket Hole Diameter Sprocket Hole Location Pocket Location Pocket Pitch Pocket Dimensions Cover Tape Width Cover Tape Thickness Max. Component Rotation or Tilt Min. Bending Radius
Dimension in mm
16.0 0.3 0.30 0.05 4.0 0.1 1.55 0.05 1.75 0.10 7.5 0.1 4.0 0.1 12.0 0.1 10.30 0.20 10.30 0.20 4.90 0.20 1.6 0.1 0.1 max 10 30
Reflow Profile
300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) Time above 183C, <160 sec Ramp up = 2-10C/sec 260 C peak 245 C, 10-30 s
9 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com
HCPL4503M High Speed Transistor Optocouplers
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet SeriesTM GlobalOptoisolatorTM GTOTM HiSeCTM I2CTM i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM ACExTM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FAST(R) FASTrTM FPSTM FRFETTM DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM
SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyBoostTM TinyBuckTM TinyPWMTM TinyPowerTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM
UniFETTM UltraFET(R) VCXTM WireTM
LIFE SUPPORT POLICY
FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I20
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
10 HCPL4503M Rev. 1.0.2
www.fairchildsemi.com

▲Up To Search▲

Price & Availability of HCPL4503M06

	To Download HCPL4503M06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .