 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SN54ABT241, SN74ABT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS184A - JANUARY 1991 - REVISED JULY 1994 * * * * * State-of-the-Art EPIC-BTM BiCMOS Design Significantly Reduces Power Dissipation Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25C High-Drive Outputs (- 32-mA IOH, 64-mA IOL) Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, Ceramic Chip Carriers (FK), and Plastic (N) and Ceramic (J) DIPs SN54ABT241 . . . J PACKAGE SN74ABT241 . . . DB, DW, OR N PACKAGE (TOP VIEW) 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 description These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Taken together with the ABT240 and ABT244, these devices provide the choice of selected combinations of inverting and noninverting outputs, symmetrical active-low output-enable (OE) inputs, and complementary OE and OE inputs. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. SN54ABT241 . . . FK PACKAGE (TOP VIEW) 2Y4 1A1 1OE VCC 1A2 2Y3 1A3 2Y2 1A4 4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13 2OE 1Y1 2A4 1Y2 2A3 1Y3 The SN74ABT241 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area. The SN54ABT241 is characterized for operation over the full military temperature range of - 55C to 125C. The SN74ABT241 is characterized for operation from - 40C to 85C. EPIC-B is a trademark of Texas Instruments Incorporated. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2Y1 GND 2A1 1Y4 2A2 Copyright (c) 1994, Texas Instruments Incorporated 2-1 SN54ABT241, SN74ABT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS184A - JANUARY 1991 - REVISED JULY 1994 FUNCTION TABLES INPUTS 1OE L L H 1A H L X OUTPUT 1Y H L Z INPUTS 2OE H H L 2A H L X OUTPUT 2Y H L Z logic symbol 1OE 1 EN 18 16 14 12 logic diagram (positive logic) 1 1OE 2 1Y1 1Y2 1Y3 1Y4 1A3 6 14 1Y3 4 1A2 16 1Y2 1A1 18 1A1 1A2 1A3 1A4 2 4 6 8 1Y1 2OE 19 EN 9 7 5 3 1A4 2Y1 2Y2 2Y3 2Y4 11 2A1 13 7 9 2Y1 2OE 19 8 12 1Y4 2A1 2A2 2A3 2A4 11 13 15 17 This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2A2 2Y2 2A3 15 5 2Y3 3 17 2A4 2Y4 2-2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54ABT241, SN74ABT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS184A - JANUARY 1991 - REVISED JULY 1994 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 7 V Voltage range applied to any output in the high state or power-off state, VO . . . . . . . . . . . . . . . - 0.5 V to 5.5 V Current into any output in the low state, IO: SN54ABT241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA SN74ABT241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -18 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 50 mA Maximum power dissipation at TA = 55C (in still air) (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . 0.6 W DW package . . . . . . . . . . . . . . . . . . . 1.6 W N package . . . . . . . . . . . . . . . . . . . . . 1.3 W Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. The maximum package power dissipation is calculated using a junction temperature of 150C and a board trace length of 750 mils, except for the N package, which has a trace length of zero. For more information, refer to the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology Data Book, literature number SCBD002B. recommended operating conditions (see Note 3) SN54ABT241 MIN VCC VIH VIL VI IOH IOL t /v Supply voltage High-level input voltage Low-level input voltage Input voltage High-level output current Low-level output current Input transition rise or fall rate Outputs enabled - 55 0 4.5 2 0.8 VCC - 24 48 5 125 - 40 0 MAX 5.5 SN74ABT241 MIN 4.5 2 0.8 VCC - 32 64 5 85 MAX 5.5 UNIT V V V V mA mA ns / V C TA Operating free-air temperature NOTE 3: Unused or floating inputs must be held high or low. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2-3 SN54ABT241, SN74ABT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS184A - JANUARY 1991 - REVISED JULY 1994 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VCC = 4.5 V, VCC = 4.5 V, VCC = 5 V, VCC = 4 5 V 4.5 VOL II IOZH IOZL Ioff ICEX IO ICC VCC = 4 5 V 4.5 VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 0, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, 55V VI = VCC or GND VCC = 5.5 V, One input at 3.4 V Oi V, Other inputs at in uts VCC or GND VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V TEST CONDITIONS II = -18 mA IOH = - 3 mA IOH = - 3 mA IOH = - 24 mA IOH = - 32 mA IOL = 48 mA IOL = 64 mA VI = VCC or GND VO = 2.7 V VO = 0.5 V VI or VO 4.5 V VO = 5.5 V Outputs high VO = 2.5 V Outputs high IO = 0, 0 Outputs low Outputs disabled Outputs enabled Data inputs Outputs disabled Control inputs 3 8 0.05 1.5 0.05 1.5 0.05 1.5 pF pF mA - 50 -100 1 24 0.5 MIN 2.5 3 2 2* 0.55 0.55* 1 50 - 50 100 50 -180 250 30 250 1.5 - 50 50 -180 250 30 250 1.5 - 50 1 10 - 10 0.55 0.55 1 50 - 50 100 50 -180 250 30 250 1.5 TA = 25C TYP MAX -1.2 2.5 3 2 2 V A A A A A mA A mA A SN54ABT241 MIN MAX -1.2 2.5 3 V SN74ABT241 MIN MAX -1.2 UNIT V VOH ICC Ci Co * On products compliant to MIL-STD-883, Class B, this parameter does not apply. All typical values are at VCC = 5 V. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND. 2-4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54ABT241, SN74ABT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS184A - JANUARY 1991 - REVISED JULY 1994 switching characteristics over recommended ranges of supply voltage and operating free-air temperature, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPZH tPZL tPHZ tPLZ FROM (INPUT) A TO (OUTPUT) Y Y Y VCC = 5 V, TA = 25C MIN 1 1 1.1 1.3 1.6 1 TYP 2.6 2.9 4.8 4.3 4.6 3.9 MAX 4.1 4.2 6.3 5.8 6.1 5.4 SN54ABT241 MIN 0.8 0.8 1 1 0.8 0.8 MAX 5.3 5 7 7 7.9 6.2 SN74ABT241 MIN 1 1 1.1 1.3 1.6 1 MAX 4.6 4.6 6.8 6.8 7.1 5.9 ns ns ns UNIT OE or OE OE or OE POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2-5 SN54ABT241, SN74ABT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS184A - JANUARY 1991 - REVISED JULY 1994 PARAMETER MEASUREMENT INFORMATION 7V From Output Under Test CL = 50 pF (see Note A) 500 S1 Open GND 500 TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH S1 Open 7V Open LOAD CIRCUIT FOR OUTPUTS 3V Timing Input tw 3V Input 1.5 V 1.5 V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES Data Input tsu 1.5 V th 3V 1.5 V 0V 1.5 V 0V Input (see Note B) tPLH Output 3V 1.5 V 1.5 V 0V tPHL VOH 1.5 V 1.5 V VOL tPHL tPLH VOH 1.5 V 1.5 V VOL Output Control tPZL Output Waveform 1 S1 at 7 V (see Note C) Output Waveform 2 S1 at Open (see Note C) tPZH 3V 1.5 V 1.5 V 0V tPLZ 1.5 V tPHZ VOH - 0.3 V VOH 3.5 V VOL + 0.3 V VOL Output 1.5 V [0V VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 2-6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright (c) 1998, Texas Instruments Incorporated |
Price & Availability of SCBS184A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |