 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET PHOTOCOUPLER PS2801-1,PS2801-4 HIGH ISOLATION VOLTAGE SOP PHOTOCOUPLER -NEPOC TM Series- DESCRIPTION The PS2801-1 and PS2801-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SOP for high density applications. This package has shield effect to cut off ambient light. FEATURES * High isolation voltage (BV = 2 500 Vr.m.s.) * Small and thin package (4,16-pin SOP, Pin pitch 1.27 mm) * High collector to emitter voltage (VCEO = 80 V) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of tape product: PS2801-1-F3, F4, PS2801-4-F3, F4 * Safety standards: PS2801-1, -4 * UL approved: File No. E72422 (S) * BSI approved: No. 8188, 8189 * VDE0884 approved (Option): PS2801-4 only APPLICATIONS * Programmable logic controllers * Measuring instruments * Power supply * Hybrid IC The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P12277EJ7V0DS00 (7th edition) Date Published February 2001 NS CP(K) Printed in Japan The mark * shows major revised points. (c) 1991, 2001 PS2801-1,PS2801-4 PACKAGE DIMENSIONS (UNIT: mm) PS2801-1 2.70.3 10.30.3 PS2801-4 TOP VIEW 16 15 14 13 12 11 10 9 TOP VIEW 43 1. Anode 2. Cathode 3. Emitter 4. Collector 12 12345678 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector 7.00.3 7.00.3 0.15+0.10 -0.05 2.3 MAX. 2.0 0.50.3 1.27 0.40.1 0.12 M 2.3 MAX. 0.10.1 2.0 0.15+0.10 -0.05 0.10.1 4.4 1.3 4.4 1.3 0.40+0.10 -0.05 0.12 M 1.27 0.50.3 MARKING PS2801-1 PS2801-4 1 003 0 03 Assembly Lot No. 1 pin Mark PS2801-4 N 003 Country Assembled Type Number Assembly Lot Last number of type No. : 1 N 0 03 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) 2 Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 ORDERING INFORMATION Part Number PS2801-1 PS2801-1-F3 PS2801-1-F4 PS2801-4 PS2801-4-F3 PS2801-4-F4 16-pin SOP Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel PS2801-4 Package 4-pin SOP Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Application Part *1 Number PS2801-1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings PS2801-1 Diode Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Unit PS2801-4 50 6 mA V 0.8 80 1 80 6 50 1.2 120 mW/C mW/ch A V V mA/ch mW/C mW/ch Vr.m.s. C C IF VR PD/C PD IFP VCEO VECO IC 0.6 60 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation PC/C PC BV TA Tstg Isolation Voltage *2 2 500 -55 to +100 -55 to +150 Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet P12277EJ7V0DS 3 PS2801-1,PS2801-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio *1 (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 Symbol VF IR Ct ICEO CTR VCE(sat) RI-O CI-O tr tf IF = 5 mA VR = 5 V Conditions MIN. TYP. 1.1 MAX. 1.4 5 Unit V A pF V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 2 mA, RL = 100 10 11 15 100 80 600 0.3 nA % V 0.4 3 5 pF s *2 *1 CTR rank (PS2801-1 only) K : 300 to 600 (%) P : 150 to 300 (%) L : 100 to 300 (%) N : 80 to 600 (%) *2 Test circuit for switching time Pulse Input PW = 100 s Duty Cycle = 1/10 IF VOUT 50 RL = 100 VCC 4 Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 200 100 Diode Power Dissipation PD (mW) 75 PS2801-4 150 50 PS2801-1 0.6 mW/C 0.8 mW/C 100 PS2801-1 PS2801-4 1.2 mW/C 25 50 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA ( C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 Forward Current IF (mA) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 70 Collector Current IC (mA) TA = +100 C +60 C +25 C 60 50 40 50 mA mA 20 mA 10 10 5 0 C -25 C -55 C 1 0.5 30 20 10 IF = 5 mA 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA 10 000 Collector Current IC (mA) 1 000 VCE = 80 V 40 V 24 V 10 V 5V 10 5 10 mA 5 mA 2 mA IF = 1 mA 100 1 0.5 10 1 0.1 -50 -25 0 25 50 75 100 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (C) Collector Saturation Voltage VCE(sat) (V) Data Sheet P12277EJ7V0DS 5 PS2801-1,PS2801-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 0.02 0.1 1.0 10 100 Ambient Temperature TA (C) Forward Current IF (mA) Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 300 VCE = 5 V, n=3 250 200 150 100 50 Sample A B C SWITCHING TIME vs. LOAD RESISTANCE 100 VCC = 5 V, 50 IC = 2 mA, CTR = 236 % Switching Time t ( s) SWITCHING TIME vs. LOAD RESISTANCE 1 000 VCC = 5 V, IF = 5 mA, CTR = 236 % tf ts 10 tr 1 td 10 5 td tr 1 0.5 ts Switching Time t (s) tf 100 0.1 0.01 0.05 0.1 0.5 1 5 10 0.1 0.1 1 10 100 Load Resistance RL (k) Load Resistance RL (k) FREQUENCY RESPONSE IF = 5 mA, VCE = 5 V CTR (Relative Value) LONG TERM CTR DEGRADATION 1.2 TYP. 1.0 0.8 0.6 0.4 0.2 IF = 5 mA TA = 25 C IF = 20 mA TA = 25 C IF = 5 mA TA = 60 C 0 Normalized Gain Gv -5 -10 -15 -20 300 50 100 200 500 RL = 1 k 100 0.5 1 2 5 10 20 0.0 10 102 103 Time (Hr) 104 105 Frequency f (kHz) Remark The graphs indicate nominal characteristics. 6 Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5+0.1 -0 7.550.1 2.8 MAX. 7.50.1 16.00.3 0.3 1.550.1 4.00.1 2.850.1 2.30.1 Tape Direction PS2801-1-F3 PS2801-1-F4 1003 1003 1003 1003 Outline and Dimensions (Reel) 2.5 2.00.5 13.00.5 R 1.0 21.00.8 1005.0 330 1003 1003 1003 1003 1003 Packing: 3 500 pcs/reel 1003 16.4 +2.0 -0.0 Data Sheet P12277EJ7V0DS 7 PS2801-1,PS2801-4 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5+0.1 -0 2.8 MAX. 7.50.1 16.00.3 10.70.1 1.550.1 12.00.1 8.30.1 0.3 2.30.1 Tape Direction PS2801-4-F3 PS2801-4-F4 Outline and Dimensions (Reel) 2.5 2.00.5 13.00.5 R 1.0 21.00.8 1005.0 330 16.4 +2.0 -0.0 Packing: 2 500 pcs/reel 8 Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C or below (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet P12277EJ7V0DS 9 PS2801-1,PS2801-4 PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE Purpose: In-out interface Xaxis Ya xis Servo Motor Servo Motor Sensor Amplifier Motor Controller Heater Controller Pulse Generator Controller COM PS2801-1 PS2801-4 PD4050 AC.DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit M CRT Computer Terminal PC Terminal Printer Power Supply Programmable Logic Controller Printer FDD Controller Memory Cassette 10 Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 [MEMO] Data Sheet P12277EJ7V0DS 11 PS2801-1,PS2801-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. * The information in this document is current as of February, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 |
Price & Availability of PS2801
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |