 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MCR218/D Thyristors Silicon-Controlled Rectifiers . . . designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled, solid-state devices are needed. * Glass-Passivated Junctions * Blocking Voltage to 800 Volts * TO-220 Construction -- Low Thermal Resistance, High Heat Dissipation and Durability MCR218 Series SCRs 8 AMPERES RMS 200 thru 800 VOLTS G A K CASE 221A-09 (TO-220AB) STYLE 3 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Voltage(1) (TJ = 25 to 125C, Gate Open) MCR218-4 MCR218-6 MCR218-8 MCR218-10 Forward Current RMS (All Conduction Angles) Peak Forward Surge Current (1/2 Cycle, Sine Wave, 60 Hz) Circuit Fusing Considerations (t = 8.3 ms) Forward Peak Gate Power Forward Average Gate Power Forward Peak Gate Current Operating Junction Temperature Range Storage Temperature Range Symbol VDRM VRRM Value 200 400 600 800 8 80 26 5 0.5 2 -40 to +125 -40 to +150 Amps Amps A2s Watts Watt Amps C C Unit Volts IT(RMS) ITSM I2t PGM PG(AV) IGM TJ Tstg 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. REV 1 Motorola Thyristor Device Data (c) Motorola, Inc. 1999 1 MCR218 Series THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Symbol RJC Max 2 Unit C/W ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted.) Characteristic Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, Gate Open) Peak On-State Voltage(1) (ITM = 16 A Peak) Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 Ohms) Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 Ohms) (Rated VDRM, RL = 1000 Ohms, TJ = 125C) Holding Current (Anode Voltage = 24 Vdc, Peak Initiating On-State Current = 0.5 A, 0.1 to 10 ms Pulse, Gate Trigger Source = 7 V, 20 Ohms) Critical Rate-of-Rise of Off-State Voltage (VD = Rated VDRM, Exponential Waveform, Gate Open, TJ = 125C) 1. Pulse Test: Pulse Width = 1 ms, Duty Cycle TJ = 25C TJ = 125C VTM IGT VGT -- 0.2 IH -- -- -- 16 1.5 -- 30 mA Symbol IDRM, IRRM -- -- -- -- -- -- 1.5 10 10 2 1.8 25 Min Typ Max Unit A mA Volts mA Volts dv/dt -- 100 -- V/s p2%. TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) FIGURE 1 - CURRENT DERATING 125 115 = CONDUCTION ANGLE 105 95 dc = 30 0 1 2 85 75 60 3 90 120 4 180 5 6 7 8 IT(AV), AVERAGE ON-STATE FORWARD CURRENT (AMPS) FIGURE 2 -- ON-STATE POWER DISSIPATION P(AV), AVERAGE ON-STATE POWER DISSIPATION (WATTS) 15 FIGURE 3 -- NORMALIZED GATE TRIGGER CURRENT I GT , NORMALIZED GATE TRIGGER CURRENT (mA) 3.0 2.0 VD = 12 Vdc 1.5 1.0 0.9 0.7 0.5 0.4 0.3 -60 -40 -20 0 20 40 60 80 100 120 140 12 = Conduction Angle 120 180 60 = 30 90 dc 9.0 6.0 3.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 IT(AV), AVG. ON-STATE CURRENT (AMPS) 7.0 8.0 TJ, JUNCTION TEMPERATURE (C) 2 Motorola Thyristor Device Data MCR218 Series FIGURE 4 -- NORMALIZED GATE TRIGGER VOLTAGE V GT , NORMALIZED GATE TRIGGER VOLTAGE I H , NORMALIZED HOLDING CURRENT (mA) 1.3 1.2 4.0 3.0 2.0 VD = 12 Vdc 1.5 1.0 0.9 0.7 0.5 0.4 -60 -40 -20 0 20 40 60 80 100 120 140 FIGURE 5 -- NORMALIZED HOLDING CURRENT VD = 12 Vdc 1.0 0.9 0.7 0.5 0.4 0.3 -60 -40 -20 0 20 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Motorola Thyristor Device Data 3 MCR218 Series PACKAGE DIMENSIONS -T- C T 4 SEATING PLANE S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 Q 123 A U K H Z L V G D N R J STYLE 3: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE CASE 221A-09 (TO-220AB) ISSUE Z Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. - http://sps.motorola.com/mfax/ 852-26629298 HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488 4 Motorola Thyristor Device Data MCR218/D |
Price & Availability of ON1809
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |