 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROCIRCUIT DATA SHEET MRLM140-05-H-RH REV 0A0 Original Creation Date: 04/20/99 Last Update Date: 04/29/99 Last Major Revision Date: VOLTAGE REGULATOR, +5 VOLTS AT 0.5A, GUARANTEED TO 100K RADS(Si) TESTED TO MIL-STD-883, METHOD 1019.5, CONDITION A General Description The LM140 monolithic 3-terminal positive voltage regulators employ internal current limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. Industry Part Number LM140 NS Part Numbers LM140H-5.0RQML LM140H-5.0RQMLV Prime Die LM141 Controlling Document SEE FEATURES SECTION Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MRLM140-05-H-RH REV 0A0 MICROCIRCUIT DATA SHEET Features Output current in excess of 0.5A No external components Internal thermal overload protection Internal short circuit current-limiting Output transistor safe-area compensation CONTROLLING DOCUMENTS: LM140H-5.0RQML 5962R9955101QXA LM140H-5.0RQMLV 5962R9955101VXA 2 MRLM140-05-H-RH REV 0A0 MICROCIRCUIT DATA SHEET (Absolute Maximum Ratings) (Note 1) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature 150 C Storage Temperature Range -65 C to +150 C Lead Temperature Soldering, (10 seconds) Thermal Resistance ThetaJA (Still Air) (500 LF/Min Air Flow) ThetaJC ESD Susceptibility (Note 3) 300 C 232 C/W 77 C/W 15 C/W 2KV Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into the thermal shutdown. Human body model, 100pF discharged through 1.5K Ohms Note 2: Note 3: Recommended Operating Conditions (Note 1) Temperature Range (TA) (Note 2) -55 C to +125 C Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. Note 2: 3 MRLM140-05-H-RH REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS: SEE NOTE 5 SYMBOL Vout (1) PARAMETER Output Voltage CONDITIONS Vin = 8V, Il = -5mA Vin = 8V, Il = -500mA Vin = 20V, Il = -5mA Vin = 20V, Il = -500mA Vin = 35V, Il = -5mA Vin = 35V, Il = -50mA VRLINE Line Regulation 8V < Vin < 35V, Il = -50mA 8V < Vin < 25V, Il = -350mA VRLOAD Load Regulation Vin = 10V, -500mA < Il < -5mA Vin = 35V, -50mA < Il < -5mA ISCD Stand by Current Drain Vin = 10V, Il = -5mA Vin = 35V, Il = -5mA Delta ISCD (LINE) Delta ISCD (LOAD) Iol Ios Stand by Current Drain vs. Line Voltage Stand by Current Drain vs. Load Current Overload Current Output Short Circuit Current 8V < Vin < 35V, Il = -5mA NOTES 5 5 5 5 5 5 5 5 5 5 5 5 5 PINNAME MIN 4.75 4.75 4.75 4.75 4.75 4.75 -150 -50 -100 -150 -7 -8 -1 MAX 5.25 5.25 5.25 5.25 5.25 5.25 150 50 100 150 -0.5 -0.5 1 UNIT V V V V V V mV mV mV mV mA mA mA SUBGROUPS 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 2 Vin = 10V, -500mA < Il < -5mA 5 -0.5 0.5 mA Vin = 8V, FORCED Delta Vout = -0.48V Vin = 10V Vin = 25V Vin = 35V 5 5 5 5 1, 5 4, 5 4, 5 -2 -2 -1.5 -1 4.7 -2 -2 -0.5 -0.01 -0.01 -0.01 5.3 2 2 A A A A V Vout (2) Delta Vout/ Delta T Output Voltage Average Temperature Coefficient of Output Voltage Vin = 10V, Il = -5mA Vin=10V, Il = -5mA, 25 C < TA < 125 C Vin=10V, Il = -5mA, -55 C < TA < 25 C mV/C 2 mV/C 3 4 MRLM140-05-H-RH REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics AC PARAMETERS: SEE NOTE 5 SYMBOL Vout NO Delta Vout/Delta Vin Delta Vout/ Delta Il Delta Vin/Delta Vout PARAMETER Output Voltage Output Noise Voltage Transient Line Response Transient Load Response Ripple Rejection CONDITIONS Vin = 10V, Il = -5mA Vin = 10V, Il = -50mA Vin = 10V, VPulse = 3V, Il = -5mA NOTES 2, 5 3, 5 5 PINNAME MIN 4.75 MAX 5.25 125 30 UNIT V SUBGROUPS 1, 2, 3 uVrms 9 mV/V 9 Vin = 10V, Delta Il = -200mA, Il = -50mA Vin = 10V, ei = 1Vrms at f = 2400Hz, Il = -125mA 5 2.5 mV/mA 9 5 60 dB 9 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: "Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 only". Vout Output Voltage Vin = 8V, Il = -5mA Vin = 8V, Il = -500mA Vin = 20V, Il = -5mA Vin = 20V, Il = -500mA Vin = 35V, Il = -5mA Vin = 35V, Il = -50mA ISCD Stand by Current Drain Note Note Note Note Note 1: 2: 3: 4: 5: Vin = 10V, Il = -5mA -0.025 0.025 -0.025 0.025 -0.025 0.025 -0.025 0.025 -0.025 0.025 -0.025 0.025 -20 20 V V V V V V % 1 1 1 1 1 1 1 Tested at TA = +125 C, correlated to TA = +150 C. Tested at extremes as a set up for Delta Vout/Delta T tests. Bench tested. Calculated parameter. For calculations use Vout at Vin = 10V, Il = -5mA. (NOTE 2) Pre and post irradiation limits are indentical to those listed under DC and AC electrical characteristics. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-STD-883, Method 1019.5, Condition A. 5 MRLM140-05-H-RH REV 0A0 MICROCIRCUIT DATA SHEET Graphics and Diagrams GRAPHICS# 05879HRA2 H03ARD P000186A DESCRIPTION METAL CAN (H), TO-39, 3LD, .200 DIA P.C. (B/I CKT) METAL CAN (H), TO-39, 3LD, .200 DIA P.C. (P/P DWG) METAL CAN (H), TO-39, 3LD, .200 DIA P.C. (PINOUT) See attached graphics following this page. 6 1 3 2 IN OUT GND LM140H, LM140LAH 3 - LEAD TO-39 CONNECTION DIAGRAM TOP VIEW P000186A MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 N MRLM140-05-H-RH REV 0A0 MICROCIRCUIT DATA SHEET Revision History Rev 0A0 ECN # Rel Date Originator Rose Malone Changes Initial MDS Release: MRLM140-05-H-RH, Rev. 0A0 M0003400 04/29/99 7 |
Price & Availability of NSC05591
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |