 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNLM709-X REV 0B0 OPERATIONAL AMPLIFIER General Description The LM709 is a monolithic operational amplifier intended for general-purpose applications. Operation is completely specified over the range of voltages commonly used for these devices. The design, in addition to providing high gain, minimizes both offset voltage and bias currents. Further, the class-B output stage gives a large output capability with minimum power drain. External components are used to frequency compensate the amplifier. Although the unity-gain compensation network specified will make the amplifier unconditionally stable in all feedback configurations, compensation can be tailored to optimize high-frequency performance for any gain setting. Original Creation Date: 06/20/95 Last Update Date: 12/10/96 Last Major Revision Date: 06/20/95 Industry Part Number LM709 NS Part Numbers LM709H/883 LM709W/883 Prime Die LM709 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLM709-X REV 0B0 MILITARY DATA SHEET (Absolute Maximum Ratings) (Note 1) Supply Voltage +18V Power Dissipation 300mW Differential Input Voltage +5V Input Voltage +10V Output Short-Circuit Duration (TA = +25 C) 5 Seconds Storage Temperature Range -65 C to +150 C Lead Temperature (Soldering 10 Sec.) 300 C Note 1: Absolute Maximum Ratings indicate limits which if exceeded may result in damage. Operating Ratings are conditions where the device is expected to be functional but not necessarily within the guaranteed performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. Recommended Operating Conditions Junction Temperature Range (Note 1) -55 C to +150 C Thermal Resistance ThetaJA (H Package) ThetaJC (H Package) Note 1: 150 C/W 45 C/W For operating at elevated temperatures, the device must be derated based on a 150 C maximum junction temperature. For operating at elevated temperature, the device must be derated based on thermal resistance ThetaJA, Tj(MAX) and TA. 2 MNLM709-X REV 0B0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Vcm = 0, Rs = 10K Ohms SYMBOL Vio PARAMETER Input Offset Voltage Rs = 10K Ohms CONDITIONS NOTES PINNAME MIN 5 6 Rs = 0 Ohms 5 6 Vcc = + 9V Vcc = + 9V Iio Input Offset Current Vcc = + 9V Vcc = + 9V Iib Input Bias Current Vcc = + 9V Vcc = + 9V Avs PSRR CMRR Vout Large Voltage Signal Gain Power Supply Rejection Ratio Common Mode Rejection Ratio Output Voltage Swing Rs=0 Ohms, RL=2K Ohms, -10V<=Vo<=10V + 15V => Vcm >= + 9V -8V <= Vcm <= 8V Rs = 0 Ohm, RL = 10K Ohms Rs = 0 Ohm, RL = 2K Ohms Icc Power Supply Current Rs = 0 Ohms 70 +12 +10 0 0 0 Vin Rin Input Voltage Range Input Resistance 2 1 1 +8 150 40 5.5 4.5 6.3 3 25 5 6 200 500 200 500 500 1500 500 1500 70 150 MAX UNIT mV mV mV mV mV mV nA nA nA nA nA nA nA nA SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1, 2 3 1, 2 3 1, 2 3 1, 2 3 V/mV 1, 2, 3 uV/V 1, 2, 3 dB V V mA mA mA V 1, 2, 3 1, 2, 3 1, 2, 3 1 2 3 1, 2, 3 KOhms 1, 2 KOhms 3 3 MNLM709-X REV 0B0 MILITARY DATA SHEET Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vcc = +15V, Vcm = 0, Rs = 10K Ohms SYMBOL Sr Gbw PARAMETER Slew Rate Gain Bandwidth CONDITIONS -5V <= Vin <5V Vin = 50mV, f = 20KHz RL = 2K Ohms NOTES PINNAME MIN 0.2 250 MAX UNIT SUBGROUPS V/uS 7 KHz 7 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Vcm = 0, Rs = 10K Ohms. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." Vio Iio Iib Input Offset Voltage Input Offset Current Input Bias Current Note 1: Note 2: Note 3: Parameter test go-no-go only. Guaranteed by the CMRR Vcm range. Datalog in K = V/mV. Rs = 10K Ohms -1 -20 -50 1 20 50 mV nA nA 1 1 1 4 MNLM709-X REV 0B0 MILITARY DATA SHEET Graphics and Diagrams GRAPHICS# H08CRE (blank) DESCRIPTION See attached graphics following this page. 5 |
Price & Availability of NSC05541
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |