 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNLF11333-X REV 0A0 Original Creation Date: 08/30/95 Last Update Date: 09/18/95 Last Major Revision Date: 08/30/95 QUAD SPST JFET ANALOG SWITCH 2 NORMALLY CLOSED SWITCHES AND 2 NORMALLY OPEN SWITCHES WITH DISABLE General Description This device is a monolithic combination of bipolar and JFET technology producing the industry's first one chip quad JFET switch. A unique circuit technique is employed to maintain a constant resistance over the analog voltage range of +10V. The input is designed to operate from minimum TTL levels, and switch operation also ensures a break-before-make action. This device operates from +15V supplies and swings a +10V analog signal. The JFET switches are designed for applications where a dc to medium frequency analog signal needs to be controlled. Industry Part Number LF11333 NS Part Numbers LF11333D/883 Prime Die LM3653 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLF11333-X REV 0A0 MILITARY DATA SHEET Features Analog signals are not loaded Constant "ON" resistance for signals up to +10V and 100KHz Pin compatible with CMOS switches with the advantage of blow out free handling Small signal analog signals to 50MHz Break-before-make action tOFF < tON High open switch isolation at 1.0MHz -50dB Low leakage in "OFF" state TTL, DTL, RTL compatibility Single disable pin opens all switches. 2 MNLF11333-X REV 0A0 MILITARY DATA SHEET (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc-Vee) 36V Reference Voltage Vee < Vr < Vcc Logic Input Voltage Vr-4.0V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. For operating at high temperature the molded DIP products must be derated based on a +100 C maximum junction temperature and a thermal resistance of +150 C/W, devices in the cavity DIP are based on a +150 C maximum junction temperature and are derated at +100 C/W. 3 MNLF11333-X REV 0A0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Vee = -15V, Vref = 0V SYMBOL Icc PARAMETER Positive Supply Current CONDITIONS Vcc = 18V, Vee = -18V Vs = -10V NOTES PINNAME MIN MAX 15 6 9 Iee Negative Supply Current Vcc = 18V, Vee = -18V Vs = -10V -15 -5 -7.5 Iref Reference Supply Current Logical "1" input Current Logical "0" input Current "ON" Resistance (Drain to Source) "ON" Resistance (Matching) "OFF" State Source Current "OFF" State Drain Current "ON" State Leakage Current Disable Current Vd = -20V Vin = 6V -4 -6 Iih 10 25 Iil Vin = -4V -0.1 -1 Ron Va = 0, Id = 1mA 2 2 Ron(match) Is(OFF) 2 -20 -5 -100 Id(OFF) Vs = 20V -5 -100 Is(ON) & Id(ON) Idis Vcc = 5V, Vee = -25V, Vs = 0V -5 -100 1 1 Va Vih Vil Analog Voltage Range Logical "1" input Voltage Logical "0" input Voltage 1 1 1 -1 -1.5 +10 2 .8 +0.1 1 200 300 20 5 100 5 100 5 100 UNIT mA mA mA mA mA mA mA mA uA uA uA uA Ohm Ohm Ohm nA nA nA nA nA nA mA mA V V V SUBGROUPS 1 1 2, 3 1 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 4 MNLF11333-X REV 0A0 MILITARY DATA SHEET Electrical Characteristics AC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vcc = +15V, Vee = -15V, Vref = 0V SYMBOL tON tOFF PARAMETER "ON" Delay Time "OFF" Delay Time Note 1: Note 2: Note 3: Vs = +10V Vs = +10V CONDITIONS NOTES 3 3 PINNAME MIN MAX 1500 500 UNIT nS nS SUBGROUPS 9 9 Parameter tested go-no-go only. Datalog conversions are: 20 Ohms = .02K, 200 Ohms = .2K, 300 Ohms = .3K Bench tested, test box No. 70256641. 5 MNLF11333-X REV 0A0 MILITARY DATA SHEET Graphics and Diagrams GRAPHICS# J14ARH CERDIP (J), 14 LEAD (P/P DWG) DESCRIPTION See attached graphics following this page. 6 |
Price & Availability of NSC05275
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |