View CS299REV3_977895.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Back
CS299 Darlington Lamp Driver
This integrated circuit is a flip chip lamp driver for use in an automotive alternator system. The circuit drives an indicator lamp located on the dashboard. Reverse battery protection is provided with internal diode, D1, and external resistance on B, C1, C2.
http://onsemi.com
* DC Current Gain 1000 * 80 V Breakdown Voltage * Reverse Battery Protection
Features
PIN CONNECTIONS Flip Chip Bump Side Up
B C1
Bump Side Down
GND
C2
ORDERING INFORMATION
Device C1 C2 CS299H Package Flip Chip Shipping Contact Sales
B
Q1 Q2 D1 R1 600
GND
Figure 1. Block Diagram
(c) Semiconductor Components Industries, LLC, 2002
1
January, 2002 - Rev. 3
Publication Order Number: CS299/D
CS299
MAXIMUM RATINGS*
Rating Storage Temperature Range, TS Ambient Operating Temperature Collector Breakdown Voltage *The maximum package power dissipation must be observed.
Back
Value -65 to +150 -40 to 140 80
Unit C C V
ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified.)
Characteristic Supply Requirements Saturation Voltage IB1 = 0.6 mA, IC2 = 350 mA TJ = -30C TJ = 150C IC1 = IC2 = 1.0 mA, RBE = 200, VC1 = VC2 VCE1 = VCE2 = 60 V, RBE = 200 VC1 =VC2 = 1.0 V, IB1 = 100 A IB1 = 1.0 A, VCE2 = 0 V, VCE1 = 1.5 V IB1 = 0.6 mA, IC1 = 50 mA, IC2 = 350 mA ID1 = 25 mA - - - 80 - 1000 50 - 0.5 - - - - - - - - - 0.60 0.55 0.65 - 10 - - 2.0 1.5 V V V V A (IC1 + IC2)/IB1 IC1/IB1 V V Test Conditions Min Typ Max Unit
Collector Breakdown Voltage Collector Cut Off Current (ICEO) DC Current Gain (HFE) NPN (Q1) VBE (in saturation) Diode Forward Voltage (D1)
PACKAGE PIN DESCRIPTION
PIN SYMBOL B C1 C2 GND Base of input darlington. Collector of darlington input device. Collector of darlington output driver. Ground. Emitter of dartlington driver. Base/Emitter resistor and substrate are also connected here. FUNCTION
http://onsemi.com
2
CS299
RECTIFIER MR2502 STATOR MR2502 S R3 *C2 10 F R1 100 k C3 0.047 F R2 50 k CS3341/51 2N6284 Power Darlington R6 20 k R9 2.4 k POWER GROUND 250 C1 0.1 F R4 18 k R5 10 k F D1 MR2502
Back
A
FIELD
C4 0.022 F R7 10
I
Lamp Indicator IGNITION SWITCH BATTERY
R10 510
CS299
*Note: C2 optional for reduced jitter.
Figure 2. Typical Application DIagram
http://onsemi.com
3
CS299
Back
.0075 .0045
.030
44 mils ref.
.0075 .0045 .0075 .0045 .030 .0075 .0045
44 mils ref. .0055 .0075 .0035 .0045 Solder bump in 4 places .018 .022
Note: All dimensions are in inches.
Figure 3. Flip Chip Dimensions and Solder Bump Locations, Bump Side Up
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
4
CS299/D

▲Up To Search▲

Price & Availability of CS299REV3

	To Download CS299REV3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .