View 3700I_967509.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CY3700I
Ultra37000TM ISRTM Programming Kit
Features
* Supports Ultra37000TM and Ultra37000VTM CPLD device families * Jam programming language support * Standard JTAG programming interface * Multi-device programming * Easy to use Windows 95TM, Windows 98TM, and Windows NTTM compatible interface * Eliminates programming insertion to improve manufacturing efficiency * For programming in the lab, on manufacturing floor, or at remote sites * ATE support via Jam on industry leading ATE platforms ISR Programming Software, the 37000 UltraISR programming cable, and a personal computer. The 37000 UltraISR programming cable connects to the parallel port of a PC into a standard 10-pin male connector mounted on the user's board. The ISR software provides an easy-to-use Graphical User Interface that accepts JEDEC files as input. The JEDEC files are used to compose platform independent Jam files. Jam files contain all the information needed to program the device. The ISR software is used to dictate how many devices are in the daisy chain and what operation is to be done on each Cypress device. The same chain can be used with other JTAG compliant devices. The ISR User's Guide describes the operation of the ISR software. The application notes included with the kit describe all system design considerations for programming with the Ultra37000 ISR Programming Kit. 10-Pin Ultra37000TM ISR Connector The diagram below shows the pinout of the 10-pin male connector to be mounted onto the board. The view looking down onto the board connector pins is shown below: TDO GND VCC NC ISR[1] TDI JTAGen TCK GND[2] TMS
Kit Contents
* 37000 UltraISRTM Programming Cable for use with Ultra37000 CPLDs * ISR Programming Software Release 2.2 * ISR Application Notes * Ultra37000 Prototype Board with one CY37256 device
Functional Description
The Ultra37000 ISR Programming Kit enables users to program Ultra37000 or Ultra37000V CPLDs on board with our
Ultra37000 ISR Programming[3]
VCC 1'
Ultra 37000 Device
25-Pin Cable
PC Parallel Port
Ultra 37000V Device Designer's Board 10-Pin ISR Connector
Notes: 1. Refer to the CD-ROM ISR User's Guide documentation for detailed information on ISR programming and electrical specification requirements. 2. Pin1 Connection. 3. A parallel port extension cable can be used to extend the 37000 UltraISR Cable to lengths over 1'.
Cypress Semiconductor Corporation
*
3901 North First Street
*
San Jose
*
CA 95134
*
408-943-2600 August 2, 1999
CY3700I
Table 1. 37000 UltraISR Cable Pin Description. Pin JTAGen ISR* VCC TDO TMS TCK TDI NC GND Type OUTPUT OUTPUT INPUT INPUT OUTPUT OUTPUT OUTPUT NC -- Description In System Reprogramming JTAG enable (active HIGH). In System Reprogramming enable indicator (active LOW). +5V & +3.3V supply voltage provided from the target system to the cable. Test Data Output Receiver. The TDO output pin of the last device in the ISR chain of the system is connected to this input pin. Test Mode Control. This is the mode select control input for the TAP controller state machine contained in the ISR interface. Test Clock. ISR interface clock input. Test Data Input Driver. This output pin is connected to the TDI input of the first device in the ISR chain. No Connect. Zero volt common ground for PC and target system.
Table 1 describes the function of each of these pins on the 37000 UltraISR programming cable. An OUTPUT is provided by the PC and an INPUT is provided by the target system. The dimensions of the male connector required for the 37000 UltraISRTM cable are given below. Male Connector: * 2 x 5 = 2 rows, 5 pins per row * Measuring from center of the pins, each pin is 0.1" from the others. * Pin Length is 0.23" * Pin cross-section is 0.025" x 0.025" Part Number: * DIGI-KEY(R) S2012-05-ND (straight-pin connector) * DIGI-KEY S2112-05-ND (right-angle connector).
Ultra37000TM Prototype Board
VCC VCCO ISR Cable Connector LED
Jumpers
VCCO GND
Power Connector
Available Space for Additional Ultra37000 CPLD (in 208-Pin PQFP)
Daisy Chain Jumpers
CY37256 160-pin TQFP
Header Strips
LED
VCC GND
Power Connector
Figure 1. Ultra37000 Prototype Board To facilitate easy and quick prototyping of designs, an Ultra37000 Prototype Board has been included in the Ultra37000 ISR Kit (see Figure 1 for the basic layout). The prototype comes with a CY37256P160 device already premounted and header strips that facilitate signal testing. Detailed information on the board layout and proper usage may be found in the Cypress application note, "Using the Ultra37000 ISR Prototype Board."
2
CY3700I
PC System Requirements
* * * * * One free parallel port 486 / 66-MHz PC or better Windows 95/98/NT 16 MB of RAM 1 MB or more disk space
Ordering Information
Product Code CY3700I Description Ultra37000 ISR Programming Kit
Document #: 38-00746-B
ISR, UltraISR, and Ultra37000 are trademarks of Cypress Semiconductor Corporation. Windows95, Windows98, and WindowsNT are trademarks of Microsoft Corporation. DIGI-KEY is a registered trademark of DIGI-KEY Corporation.
(c) Cypress Semiconductor Corporation, 1999. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.

▲Up To Search▲

Price & Availability of 3700I

	To Download 3700I Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .