View SY-XXW-K_917145.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MINIATURE RELAY
1 POLE--1 A (FOR SIGNAL SWITCHING)
SY SERIES
s FEATURES
q q q
RoHS compliant
q q q q q q q
Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 --Dielectric strength 1000 VAC between coil and contacts --Surge strength 1500 V High sensitivity Wide ambient temperature range (-30C to +90C) Wide operating range DIL pitch terminals Plastic sealed type Dial-pulse relay available (10pps, 20pps) RoHS compliant since date code: 0519 Please see page 5 for more information
s ORDERING INFORMATION
[Example]
(a) (b) (c) (d)
SY - 12 (a) (b)
W-K (c) (d)
SY: SY Series Refer to the COIL DATA CHART Nil: Single type W: Bifurcated type K: Plastic sealed type
Series Name Nominal Voltage Contact Enclosure
Note: For movable and stationary contact with gold overlay type, add suffix "-OH"
s SAFETY STANDARD AND FILE NUMBERS
UL478, 508 (File No. E45026) C22.2 No. 14 (File No. LR35579) Please request when the approval markings are required on the cover.
Nominal voltage 1.5 to 24 VDC 0.5 A 1A 0.15 A 120 VAC 30 VDC 48 VDC Contact rating resistive
www..com
SY SERIES
s SPECIFICATIONS
Item Contact Arrangement Material Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load*1 SY-( ) -K (Single) SY-( ) W - K (Bifurcated) 1 form C (SPDT) Gold overlay silver alloy Maximum 100 m (at 1 A 6 VDC) 0.5 A 120 VAC or 1 A 24 VDC 2A 60 AV, 24 W 120 VAC/60 VDC 1A 1 mA 1 VDC 0.1 mA 100 mVDC
Capacitance (at 10 MHz) Coil Nominal Power (at 20C) Operate Power (at 20C) Operating Temperature Time Value Operate (at nominal voltage) Release (at nominal voltage) Insulation Resistance between open contacts Dielectric strength between coil and contacts Surge Strength Life Mechanical Electrical (at contact rating) Other Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight
Approximately 1.4 pF (between open contacts) Approximately 5.0 pF (between coil and contacts) 0.15 to 0.175 W 0.075 to 0.086 W -30C to +90C (no frost)/18 V coil: +85C, 24 V coil: +80C Maximum 5 ms Maximum 2 ms Minimum 1,000 M (at 500 VDC) 400 VAC 1 minute 1,000 VAC 1 minute 1,500 V 5 x 106 operations minimum 1 x 105 operations minimum 1 x 105 operations minimum Minimum 1,000 M (at 250 VDC) 300 VAC 1 minute
10 to 55 Hz (double amplitude of 1.5 mm) 10 to 55 Hz (double amplitude of 1.5 mm) 300 m/s2 (11 1 ms) 1,000 m/s2 (6 1 ms) Approximately 1.7 g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
2
SY SERIES
s COIL DATA CHART
MODEL Single SY-1.5-K SY- 3 -K SY-4.5-K SY- 5 -K SY- 6 -K SY- 9 -K SY-12 -K SY-18 -K Bifurcated SY-1.5W-K SY- 3 W-K SY-4.5W-K SY- 5 W-K SY- 6 W-K SY- 9 W-K SY-12 W-K SY-18 W-K 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 15 60 135 167 240 540 960 1,940 3,290 1.05 VDC 2.1 VDC 3.2 VDC 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 12.6 VDC 16.8 VDC 0.08 VDC 0.15 VDC 0.23 VDC 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC 1.2 VDC 150 mW 150 mW 150 mW 150 mW 150 mW 150 mW 150 mW 170 mW 175 mW Nominal voltage Coil resistance (10%) Must operate voltage Must release voltage Nominal power
SY-24 -K SY-24 W-K 24 VDC Note : All values in the table are measured at 20C.
s CHARACTERISTIC DATA
3
SY SERIES
s REFERENCE DATA
s DIMENSIONS
q Dimensions qSchematics (Bottom View) q PC board mounting hole layout (Bottom View)
Unit: mm
4
SY SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fcai.fujitsu.com/pdf/LeadFreeLetter.pdf) q Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0Cu-Ni will be used for FTRB3 and FTR-B4 series relays. q Most signal and some power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE). q It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). q "LF" is marked on each outer and inner carton. (No marking on individual relays). q To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. We will ship leaded relays as long as the leaded relay inventory exists.
q
2. Recommended Lead Free Solder Profile
q
Recommended solder paste Sn-3.0Ag-0.5Cu and Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005)
Reflow Solder condtion Flow Solder condtion:
Peak Temp.: max. 250C 250 Soldering
Pre-heating: Soldering:
maximum 120C dip within 5 sec. at 260C soler bath
temperature (C)
Solder by Soldering Iron:
220 Pre-heating Cooling
Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec.
170 130
90~120 sec. max. 120 sec.
20~30 sec. (duration)
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
q
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
q
SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house test.
5. Solid State Relays
q
Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating 5 is between the terminal and the Sn plating to avoid whisker.
SY SERIES
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
Fujitsu Components International Headquarter Offices
(c) 2005 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 06/10/2005.
6

▲Up To Search▲

Price & Availability of SY-XXW-K

	To Download SY-XXW-K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .