Part Number Hot Search : 
MC74LV TOP232 US3018CW VBXXXXX 1N4747 P8044AH 24261 ON2231
Product Description
Full Text Search
 

To Download M74HC192RM13TR Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 M74HC192
SYNCHRONOUS UP/DOWN DECADE COUNTER
s
s
s
s
s
s
s
HIGH SPEED : fMAX = 55 MHz (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC =4A(MAX.) at TA=25C HIGH NOISE IMMUNITY: VNIH = V NIL = 28 % VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 4mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 192
DIP
SOP
TSSOP
ORDER CODES
PACKAGE DIP SOP TSSOP TUBE M74HC192B1R M74HC192M1R T&R M74HC192RM13TR M74HC192TTR
DESCRIPTION The M74HC192 is an high speed CMOS SYNCRONOUS UP/DOWN DECADE COUNTERS fabricated with silicon gate C2MOS technology. The counter has two separate clock inputs, an UP COUNT input and a DOWN COUNT input. All outputs of the flip-flop are simultaneously triggered on the low to high transition of either clock while the other input is held high. The direction of counting is determined by which input is clocked. This counter may be preset by entering the desired data on the DATA A, DATA B, DATA C, and DATA D input. When the LOAD input is taken low the data is loaded independently of either clock input. This feature allows the counters to be used as divide-by-n counters by modifying the count length with the preset inputs. In addition PIN CONNECTION AND IEC LOGIC SYMBOLS
the counter can also be cleared. This is accomplished by inputting a high on the CLEAR input. All 4 internal stages are set to low independently of either COUNT input. Both a BORROW and CARRY output are provided to enable cascading of both up and down counting functions. The BORROW output produces a negative going pulse when the counter underflows and the CARRY outputs a pulse when the counters overflows. The counter can be cascaded by connection the CARRY and BORROW outputs of one device to the COUNT UP and COUNT DOWN inputs, respectively, of the next device. All inputs are equipped with protection circuits against static discharge and transient excess voltage.
July 2001
1/14
M74HC192
INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 3, 2, 6, 7 4 5 11 12 13 14 15, 1, 10, 9 8 16 SYMBOL QA to QD COUNT DOWN NAME AND FUNCTION Flip-Flop Outputs Count Down Clock Input
COUNT UP Count Up Clock Input LOAD CARRY BORROW CLEAR A to D GND Vcc Asynchronous Parallel Load Input (Active LOW) Count Up (Carry) Output (Active LOW) Count Down (Borrow) Output (Active LOW) Asynchronous Reset Input (Active High) Data Inputs Ground (0V) Positive Supply Voltage
TRUTH TABLE
COUNT UP COUNT DOWN H H H H X X
X : Don't Care
LOAD H H H H
CLEAR L L L L L H
FUNCTION COUNT UP NO COUNT COUNT DOWN NO COUNT PRESET RESET
X X
L X
2/14
M74HC192
LOGIC DIAGRAM
This logic diagram has not be used to estimate propagation delays
3/14
M74HC192
TIMING CHART
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VO IIK IOK IO PD Tstg TL Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Current Power Dissipation Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to +7 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 20 20 25 50 500(*) -65 to +150 300 Unit V V V mA mA mA mA mW C C
ICC or IGND DC VCC or Ground Current
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied (*) 500mW at 65 C; derate to 300mW by 10mW/C from 65C to 85C
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO Top tr, tf Supply Voltage Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time VCC = 2.0V VCC = 4.5V VCC = 6.0V 4/14 Parameter Value 2 to 6 0 to VCC 0 to VCC -55 to 125 0 to 1000 0 to 500 0 to 400 Unit V V V C ns ns ns
M74HC192
DC SPECIFICATIONS
Test Condition Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 VOL Low Level Output Voltage 2.0 4.5 6.0 4.5 6.0 II ICC Input Leakage Current Quiescent Supply Current 6.0 6.0 IO=-20 A IO=-20 A IO=-20 A IO=-4.0 mA IO=-5.2 mA IO=20 A IO=20 A IO=20 A IO=4.0 mA IO=5.2 mA VI = VCC or GND VI = VCC or GND TA = 25C Min. 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 4.18 5.68 2.0 4.5 6.0 4.31 5.8 0.0 0.0 0.0 0.17 0.18 0.1 0.1 0.1 0.26 0.26 0.1 4 1.9 4.4 5.9 4.13 5.63 0.1 0.1 0.1 0.33 0.33 1 40 Typ. Max. Value -40 to 85C Min. 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 4.10 5.60 0.1 0.1 0.1 0.40 0.40 1 80 A A V V Max. -55 to 125C Min. 1.5 3.15 4.2 0.5 1.35 1.8 Max. V Unit
VIH
High Level Input Voltage Low Level Input Voltage High Level Output Voltage
VIL
V
VOH
5/14
M74HC192
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, Input tr = tf = 6ns)
Test Condition Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 TA = 25C Min. Typ. 30 8 7 65 20 16 40 13 11 40 13 11 85 25 20 110 30 25 110 31 25 80 25 20 120 34 28 110 30 25 100 30 25 120 35 29 120 35 29 12 48 55 Max. 75 15 13 190 38 32 130 26 22 130 26 22 220 44 37 250 50 43 250 50 43 190 38 32 250 50 43 250 50 43 225 45 38 250 50 43 250 50 43 4 20 24 Value -40 to 85C Min. Max. 95 19 16 240 48 41 165 33 28 165 33 28 275 55 47 315 63 54 315 63 54 240 48 41 315 63 54 315 63 54 280 56 48 315 63 54 315 63 54 3.4 17 20 -55 to 125C Min. Max. 110 22 19 285 57 48 195 39 33 195 39 33 330 66 56 375 75 64 375 75 64 285 57 48 375 75 64 375 75 64 340 68 58 375 75 64 375 75 64 ns ns Unit
tTLH tTHL Output Transition Time tPLH tPHL Propagation Delay Time (COUNT UP, DOWN - Q) tPLH tPHL Propagation Delay Time (COUNT UP CARRY) tPLH tPHL Propagation Delay Time (COUNT DOWN BORROW) tPLH tPHL Propagation Delay Time (LOAD - Q) tPLH tPHL Propagation Delay Time (LOAD CARRY) tPLH tPHL Propagation Delay Time (LOAD BORROW) tPLH tPHL Propagation Delay Time (DATA - Q) tPLH tPHL Propagation Delay Time (DATA CARRY) tPLH tPHL Propagation Delay Time (DATA BORROW) tPHL Propagation Delay Time (CLEAR -Q) Propagation Delay Time (CLEAR -CARRY) Propagation Delay Time (CLEAR BORROW) Maximum Clock Frequency
ns
ns
ns
ns
ns
ns
ns
ns
ns
tPLH
ns
tPHL
ns
fMAX
5 25 30
MHz
6/14
M74HC192
Test Condition Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 TA = 25C Min. Typ. 34 9 7 34 9 7 40 12 10 30 9 7 Max. 100 20 17 75 15 13 100 20 17 75 15 13 0 0 0 50 10 9 50 10 9
Value -40 to 85C Min. Max. 125 25 21 95 19 16 125 25 21 95 19 16 0 0 0 65 13 11 65 13 11 -55 to 125C Min. Max. 150 30 26 110 22 19 150 30 26 110 22 19 0 0 0 75 15 13 75 15 13 ns Unit
tW(H) tW(L) tW(L)
Minimum Pulse Width (COUNT UP/ DOWN) Minimum Pulse Width (LOAD) Minimum Pulse Width (CLEAR) Minimum Set-up Time(DATA -LOAD) Minimum Hold Time Minimum Removal Time (LOAD) Minimum Removal Time (CLEAR)
ns
tW(H)
ns
ts
ns
th
ns
tREM
tREM
6 2 2 14 4 3
ns
ns
CAPACITIVE CHARACTERISTICS
Test Condition Symbol Parameter VCC (V) 5.0 5.0 TA = 25C Min. Typ. 5 68 Max. 10 Value -40 to 85C Min. Max. 10 -55 to 125C Min. Max. 10 pF pF Unit
CIN CPD
Input Capacitance Power Dissipation Capacitance (note 1)
1) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
7/14
M74HC192
TEST CIRCUIT
CL = 50pF or equivalent (includes jig and probe capacitance) RT = ZOUT of pulse generator (typically 50)
WAVEFORM 1 : PROPAGATION DELAY TIME, MINIMUM PULSE WIDTH (COUNT UP AND DOWN) (f=1MHz; 50% duty cycle)
8/14
M74HC192
WAVEFORM 2 : PROPAGATION DELAY TIME, MINIMUM PULSE WIDTH (CLEAR, LOAD) (f=1MHz; 50% duty cycle)
WAVEFORM 3 : SETUP AND HOLD TIME (A, B, C, D to LOAD) (f=1MHz; 50% duty cycle)
9/14
M74HC192
WAVEFORM 4: MINIMUM REMOVAL TIME (COUNT UP OR DOWN TO CLEAR) (f=1MHz; 50% duty cycle)
WAVEFORM 5 : MINIMUM REMOVAL TIME (COUNT UP OR DOWN TO LOAD) (f=1MHz; 50% duty cycle)
10/14
M74HC192
Plastic DIP-16 (0.25) MECHANICAL DATA
mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 TYP. MAX. inch
P001C
11/14
M74HC192
SO-16 MECHANICAL DATA
DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm. MIN. TYP MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010
PO13H
12/14
M74HC192
TSSOP16 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b c D E E1 e K L 0 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8 0.75 0 0.018 0.024 1 TYP MAX. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8 0.030 0.004 0.039 MIN. TYP. MAX. 0.047 0.006 0.041 0.012 0.0089 0.201 0.260 0.176 inch
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
0080338D
13/14
M74HC192
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom (c) http://www.st.com
14/14


▲Up To Search▲   

 
Price & Availability of M74HC192RM13TR

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X