 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| K500F Series 8 pin DIP, 5.0 Volt, CMOS/TTL, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE MH PRODUCT SERIES. 5V Crystal Clock Oscillators 4-pin Package, Compatible with 8-pin DIL 1.5MHz to 100MHz Frequency Range TTL/CMOS Compatible Tight Symmetry (45/55%) Available Tri-State Option Available 100ppm Stability Standard - K1100FC K500F Series Tighter Stabilities Available 25ppm Stability:- K1100FA 50ppm Stability:- K1100FB Case Ground for EMI Protection E L E C T R I C A L S P E C I F I C AT I O N S MODEL Frequency Range (MHz) Frequency Stability (ppm) Overall 0C to 70C -40C to 85C Temperature Range (C) Operating Storage Supply Voltage (V) Supply Current (mA) Output TTL/CMOS -40C to +85C -55C to +125C +5.0 5% <30 0.9 VCC 0.1 VCC Up to 80MHz 50pF; >80MHz 30pF <10 40/60 10ps RMS @ 90MHz <10 Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 25 N/A 50 50 100 100 K500FA K500FB 1.5 to 125 K500FC "0" Level (VOL) "1" Level (VOH) Load TR & TF (ns) Symmetry (%) Jitter (Typical) Start up Time (ms) PA R T N U M B E R I N G G U I D E K500FXXXX - Specify Frequency "Blank" = Fixed Frequency "E" = Tri-State "Blank" = 0oC to 70oC Operating Temperature "M" = -40oC to 85oC Operating Temperature "Blank" = 40/60% Symmetry "S" = 45/55 Symmetry "A" 25ppm Frequency Stability (Available 0/70oC only) "B" = 50 ppm Frequency Stability "C" = 100ppm Frequency Stability 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Revision: 03-01-07 1 K500F Series 8 pin DIP, 5.0 Volt, CMOS/TTL, Clock Oscillator 5V Crystal THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. Clock Oscillators PLEASE REFER TO THE MH PRODUCT SERIES. 5V Crystal Clock Oscillators PIN FUNCTION PIN 1 21 32 43 4 FUNCTION N/C / Tri-State N/C / GroundTri-State Output Ground + Output VCC + VCC K500F Series K500F Series SHIPPING TUBE CROSS SECTION SHIPPING TUBE CROSS SECTION OUTPUT WAVEFORM OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM TEST CIRCUIT DIAGRAM TEST METHODS TEST METHODS Temperature Cycle Temperature Cycle Mechanical Shock Mechanical Shock Vibration MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS MIL-STD-833, Mtd 1010, Cond. B REFERENCE PROCEDURES REFERENCE PROCEDURES DESCRIPTION DESCRIPTION -55C to +125C; Air-to-Air; 100 cycles; 10 MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B MIL-STD-883, Mtd 2002, Cond. MIL-STD 883, Mtd 2007, Cond. BB MIL-STD 883, Mtd 2007, Cond. B MIL-STD-202, Mtd 103 MIL-STD-202, Mtd 103 MIL-STD-883, Mtd 1011.7 Cond. B MIL-STD-883, Mtd 1011.7 Cond. MIL-STD-883, Mtd 3015 Class II B MIL-STD-883, Mtd 3015 MIL-STD-883, Mtd 2022.2 Class II MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-883, Mtd 2022.2 min. dwell +125C; Air-to-Air; 100 cycles; 10 -55C to min. dwell 1500 g's 1500 g's 20-2000 Hz; 0.06 inch; 15g's; 3 planes 20-2000 Hz; 0.06 inch; days 40C; 90%-95% R.H.; 5615g's; 3 planes 40C; 90%-95% R.H.; 56 days 100C to 0C; Water-to-Water; 15 cycles 2100C 4 KV Threshold KV to to 0C; Water-to-Water; 15 cycles 2 KV dip; Meniscograph Solder to 4 KV Threshold Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Solder dip; Meniscograph Criteria Vibration Humidity Steady State Humidity Steady Thermal Shock State Thermal Shock Electrostatic Discharge Electrostatic Solderability Discharge Hermeticity Solderability MIL-STD-883, Mtd 1014.8, Cond. Mass 30 seconds Hermeticity Resistance to Soldering MIL-STD-202, Mtd 210D, Cond. J A1 235C; spectro. 2 x 10-8 atmos. CC/sec He A, Lead Integrity Soldering MIL-STD-883, Mtd 2004.5, Cond. J B1 Lead tension & bend stress MIL-STD-202, Mtd 210D, 235C; 30 seconds Resistance to MIL-STD-883, Mtd 2004.5, Lead tension & bend Lead Integrity MIL-STD-883, Mtd 2015.8 Cond. A, B1 Resistance to solvents stress Marking Permanence Life Test Permanence Marking MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2015.8 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 800-888-1499 or www.champtech.com 800-888-1499 or www.champtech.com MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed hours minimum or application. MIL-STD-883, Mtd 1005.6 Life Test 125C, powered, 1000 as a result of their use Resistance to solvents 125C, powered, 1000 hours minimum Revision: 03-01-07 2 |
Price & Availability of K500FA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |