View 7B41-02-1_684340.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Isolated, Voltage or Current Input 7B41
FEATURES
Interfaces, amplifies and filters unipolar and bipolar voltage inputs. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V. All 7B41 series modules are mix-and-match and Hot Swappable.
FUNCTIONAL BLOCK DIAGRAM
APPLICATIONS
Industrial signal conditioning Industrial signal isolation Industrial signal filtering
Figure 1. 7B41 Functional Block Diagram
PRODUCT OVERVIEW
The 7B Series of signal conditioners feature small size, low cost and a wide output voltage range for a variety of applications including process control and factory-floor environments. The single-channel 7B modules accept inputs from a range of transducers and are fully rated over the extended -40oC to +85oC industrial temperature range. All 7B Series modules are rated for a nominal power supply input of +24 VDC; and, for maximum flexibility, they will accept supply voltages in the +14 VDC to +35 VDC range. The input modules, with the exception of the 7B21, provide a high-level output voltage that is factory configured for either the +1 V to +5 V or 0 V to +10 V range. The 7B21 is a unity gain, isolated input module with an input/output range of +10V. Output modules are available that provide either isolated process current or isolated bipolar voltage output. Model 7B39 converts either a +1 V to +5 V input to a 4 to 20 mA output or a 0 V to +10 V input to a 0-20 mA output. The input/output ranges of the 7B39 are factory configured. The 7B22 is a unity gain module that provides an isolated +10V output signal. All modules have a universal pinout and may be readily hot-swapped under full power without disrupting field wiring. Each module accepts analog transducer signals and transfers them to a process control or factory data collection system without the inherent noise, non-linearity, drift and extraneous voltages which frequently accompany the signals.
The modules feature a maximum nonlinearity of +0.02% and are factory calibrated to guarantee a maximum accuracy specification of +0.1%. The 7B Series offers up to 1500 V rms continuous common mode voltage isolation and 120 V rms of field wiring input protection. The power supplies necessary to drive each of the individual module's input circuitry are internally isolated, enabling the 7B Series modules to offer true channel-to-channel isolation of the input signals. The modules directly accept analog signals from thermocouples, RTDs, current loop powered transmitters, and other process control signals. The 7B Series modules amplify, linearize, isolate, protect and convert the transducer output signals to standardized analog inputs for high-level analog I/O subsystems. The 7B Series Subsystem consists of 19-inch rackcompatible hardware (model AC 1363), with universal mounting backplane and a family of plug-in (up to 16 per backplane) input and output signal conditioning modules. Four, eight-, and sixteen-channel backplanes are available. Each backplane incorporates screw terminals for easy power connections and field wiring, and includes a 25-pin D-type connector for interfacing the high-level single-ended voltage outputs to the user's equipment. Gold-plated sockets are provided on each channel of the backplane to ensure the reliability of each module's electrical connection.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. www.analog.com Tel: 781.329.4700 Fax: 781.326.8703 (c) 2004 Analog Devices, Inc. All rights reserved.
7B41 GENERAL DESCRIPTION
The 7B41 is a single-channel signal conditioning module that interfaces, amplifies and filters unipolar and bipolar voltage inputs and provides a protected precision output of either +1 V to +5 V or 0 V to +10 V. Model 7B41 features a nonlinearity of +0.02% maximum and an accuracy of +0.1% maximum (+0.01% typical). To accurately measure low level signals in electrically noisy environments, 1500 V rms of galvanic transformer-based isolation with a common mode rejection (CMR) of 110 dB @ 50/60 Hz and a normal mode rejection (NMR) of 100 dB @ 50/60 are provided. Rated to operate with nominal +24 VDC supply, Model 7B41 is mix-and-match and hot-swappable with other 7B Series input modules, so it an be inserted or removed from any socket in the same backplane without disturbing system power. The floating differential input of Model 7B41 is fully protected up to 240 V rms line voltage. A one-pole 10 KHz filter preconditions the input signal prior to amplification by a low drift input amplifier. Amplitude modulation is used to implement transformer isolation (1500 V rms input-to-output and power). Isolated front-end circuitry power is supplied by a DC/DC converter. The output section contains a four pole low pass filter (-3 dB @ 10KHz), a buffer amplifier and a power oscillator. The two-pole output filter and subsequent buffer ensures that a low noise, low impedance (<1) signal is available at the output to drive loads of 2 k minimum.
Figure 2
Rev. 0 | Page 2 of 8
7B41
7B41 Models Available
Model 7B41-01-1 7B41-01-2 7B41-02-1 7B41-02-2 7B41-03-1 7B41-03-2 7B41-04-1 7B41-04-2 7B41-05-1 7B41-05-2 7B41-06-1 7B41-07-1 7B41-07-2 7B41-08-1 7B41-08-2 Input Range 0-10V 0-10V +/-5V +/-5V +/-10V +/-10V 0-5V 0-5V 0-20V 0-20V +/-20V 0-50V 0-50V +/-50V +/-50V Output Range 1-5V 0-10V 1-5V 0-10V 1-5V 0-10V 1-5V 0-10V 1-5V 0-10V 0-10V 1-5V 0-10V 1-5V 0-10V
7B41 Specifications Wideband mV/V Isolated Input module (typical @ +25C and +24 Vdc)
Description Range Standard Range Custom Ranges Output Range Options (RL > 2 k) Accuracy2 Initial @25C Nonlinearity (BSL) Input Ofs vs. Temp Zero Suppression vs. Temp Span vs. Temp Output Ofs vs. Temp Input Bias Current Input Resistance Power On Power Off Overload Output Noise 5MHz Bandwidth 2mV peak >1M Ohm >1M Ohm >1M Ohm 0.01% span (0.1% max) +/-0.02% max 0.5uV/C 0.002%Vz/C +/-35ppm/C +/-0.001% span +/- 100 pA
1
Model 7B41
+/- 5V to +/- 50V YES 1-5V or 0-10V (1)
Rev. 0 | Page 3 of 8
7B41
10Hz-100KHz Bandwidth 0.1Hz-10Hz Bandwidth Bandwidth, -3dB (7-pole Butterworth Filter) Output Rise Time, 10-90% span Common-Mode Voltage (CMV) Input-to-Output and Power Continues Common Mode Rej. (CMR) Normal Mode Rej. (NMR) 50/60 Hz Input Protection Input Transient Protection Output Resistance Output Voltage/ Current Limit Power Supply Voltage, Rated Performance Current Sensitivity Mechanical Dimensions Weight Environmental Temperature Range, Operating Temperature Range, Storage Relative Humidity ESD Sensitivity RFI Susceptibility -40C to +85C -40C to +85C 0 to 90% @ +60C non-condensing IEC 801-2, Level 2 0.1% span max @ 158,440 MHz, 5W, 3 ft. 14-35Vdc 20mA max +/-0.0001%/%Vs 1.663"x2.11"x0.563" (42.24mm x 53.6mm x 14.3mm) 60 gms 1500 Vrms min 110 dB 100 dB/dec >10 Khz (2) 240 Vrms, +/-35Vdc continuous ANSI/IEEE C37.90.1-1989 <1 Ohm +/-12V, +/-14mA 1mV rms 0.5uV peak 10 KHz (2) 40 us (2)
Warm-up time required to meet specifications is approximately 10 minutes. (1) +/- 5V and +/- 10V output ranges are available as custom configurations. (2) Custom Bandwidths available, Rise and Fall times, NMR frequency will vary accordingly Specifications subject to change without notice.
Rev. 0 | Page 4 of 8
7B41 PIN CONFIGURATIONS AND FUNCTIONAL DESCRIPTIONS
Figure 3 7B41 Input Field Connections
Table 1. Pin Function Descriptions--
Pin No. 0 1 2 3 4 5 Input Module Function SENSOR INPUT INPUT HIGH INPUT LOW POWER SUPPLY (DC) OUTPUT VOLTAGE OUTPUT & POWER COMMON Output Module Function NOT USED OUTPUT HIGH OUTPUT LOW POWER SUPPLY (DC) INPUT VOLTAGE INPUT AND POWER COMMON
Figure 4 . Model 7B Series Module, with pin-out assignments.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. 0 | Page 5 of 8
7B41 OUTLINE DIMENSIONS
Figure 5. Outline Dimensions
Rev. 0 | Page 6 of 8
7B41 NOTES
Rev. 0 | Page 7 of 8
7B41 NOTES
(c) 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective companies. D05181-0-10/04(0)
Rev. 0 | Page 8 of 8

▲Up To Search▲

Price & Availability of 7B41-02-1

	To Download 7B41-02-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .