View MKP3386Y2_663504.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BCcomponents
DATA SHEET
MKP 338 6 Y2 Interference suppression film capacitors
Product specification New File under BCcomponents, BC05 2001 Jun 22
BCcomponents
Product specification
Interference suppression film capacitors
MKP RADIAL POTTED TYPE
MKP 338 6 Y2
PITCH 7.5/15/22.5/27.5 mm PITCH 7.5 mm (bent back lead)
296x12(full_width)
P= 7.5 and 15 mm
P(bent back leads) = 7.5 mm
P = 22.5 and 27.5 mm
CBB333
Fig.1 Simplified outlines.
FEATURES
QUICK REFERENCE DATA(1) DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (AC) voltage , 50 to 60 Hz Rated (DC) voltage Climatic category Rated temperature Maximum application temperature Reference specifications Safety approvals: 250 V 300 V Materials Safety class Notes UL1414; note 2 UL1283; ENEC; note 2 qualified in accordance with UL94V-O Y2; line bypass and antenna coupling 1 to 470 nF VALUE
* 7.5 to 27.5 mm lead pitch * Supplied loose in box, taped on ammopack or reel * Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case.
APPLICATIONS
20%; 10%; 5%
300 V 1000 V 55/105/56/B 105 C 105 C IEC 60384-14 2nd edition and EN 132400
* For Y2-electromagnetic interference suppression * Specially designed to meet the requirements of the "IEC 60384-14 2nd edition, EN 132400", requiring for Y2 a 5 kV peak pulse voltage test and both the UL1414 and CSA-C22.2 No. 1 specification.
DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-14/121".
1. Under development. 2. Pending.
2001 Jun 22
2
BCcomponents
Product specification
Interference suppression film capacitors
SAFETY APPROVALS AND SAFETY TEST REPORT Approvals SAFETY APPROVALS (X2)
R
MKP 338 6 Y2
VOLTAGE 250 V (AC) 300 V (AC) 300 V (AC)
VALUE 1 nF to 470 nF 1 nF to 470 nF 1 nF to 470 nF pending pending pending
FILE NUMBERS
UL1414 and CSA-C22.2 No.1 UL1283 and CSA-C22.2 No.8
02
R
ENEC (EN132400)
Safety test report SAFETY TEST REPORT CB TEST CERTIFICATE VOLTAGE 300 V (AC) VALUE 1 nF to 470 nF FILE NUMBERS pending
The Enec-approval together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway, Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
2001 Jun 22
3
BCcomponents
Product specification
Interference suppression film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 7.5 mm 338 6 7.5 mm (bent back) 15.0 mm 22.5 mm 27.5 mm CAPACITANCE (numerically)
MKP 338 6 Y2
MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
Y2
Example: 104 = 10 x 10 = 100 nF
2222
338
6.
XX X
TYPE 338 6
PACKAGING loose in box taped
Y2
338 6
STANDARD DIMENSIONS lead length 3.5 mm lead length 5.0 mm lead length 25.0 mm pitch 7.5 mm or bent back to 7.5 mm ALTERNATIVE PITCH SIZES lead length 3.5 mm lead length 5.0 mm lead length 25.0 mm ALTERNATIVE TAPED VERSION
C-TOL PREFERRED TYPES 60 62 20% 64 66 ON REQUEST 6. 6. 6. ON REQUEST
Y2
338 6
loose in box
20%
Y2
taped ALTERNATIVE C-TOL lead length 3.5 mm loose in box lead length 5.0 mm lead length 25.0 mm pitch 7.5 mm or bent back to 7.5 mm taped
20%
6. ON REQUEST 61 6. 63 6. 65 6. 67 6. 6. 6.
338 6
Y2
10% 5% 10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
4
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 GENERAL DATA
MKP 338 6 Y2
PITCH 7.5 mm
296x12(full_width)
l
b
h
lt P
(1) F - F' < 0.3 mm F = 7.5 +0.6/-0.1 mm
Odt
CBA196
Fig.3 Outline.
Specific reference data for the 300 V AC (Y2) capacitors DESCRIPTION Tangent of loss angle: C 470 nF Rated voltage pulse slope (dU/dt)R at 420 V R between leads, for C 0.33 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (AC) voltage between leads and case Available 300 V (AC) Y2 versions PACKAGING DIMENSIONS lt = 3.5 +1/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 338 60... 2222 338 61...; note 1 2222 338 6....; note 1 2222 338 62... 2222 338 63...; note 1 2222 338 6....; note 1 2222 338 64... 2222 338 65...; note 1 2222 338 6....; note 1 2222 338 66... 2222 338 6....; note 1 2222 338 6....; note 1 ORDERING preferred on request on request preferred on request on request preferred on request on request preferred on request on request at 1 kHz 10 x 10-4 VALUE at 10 kHz at 100 kHz 20 x 10-4 100 x 10-4 100 V/s >15000 M >30000 M 3400 V; 1 minute 2100 V; 1 minute
Loose in box
lt = 5.0 1.0 mm
lt = 25.0 2.0 mm
Ammopack Note
H = 18.5 mm; for P0 = 12.7 mm
20% 10% 5% 20% 10% 5% 20% 10% 5% 20% 10% 5%
1. Other dimensions for 10% and 5% tolerance values.
2001 Jun 22
5
BCcomponents
Product specification
Interference suppression film capacitors
URac = 300 V (Y2); URdc = 1000 V
MKP 338 6 Y2
loose and taped
CATALOGUE NUMBER LOOSE IN BOX C(1) (F) DIMENSIONS bxhxl (mm) MASS (g) short leads long leads AMMOPACK H = 18.5 mm; P0 = 12.7 mm C-tol = 20% last 5 digits
lt = 3.5+1/-0.5 mm lt = 5.0 1.0mm lt = 25.0 2.0mm C-tol = 20% catalogue number last 5 digits
Pitch = 7.5 0.4 mm; dt = 0.50 0.05 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 Note 1. Under development. 5.0 x 10.5 x 10.0 6.0 x 11.5 x 10.0 0.9 1.0 4.0 x 9.0 x 10.0 0.5 2222 338 60102 2222 338 60122 2222 338 60152 2222 338 60182 2222 338 60222 2222 338 60272 2222 338 60332 2222 338 60392 2222 338 60472 2222 338 60562 .. 62102 .. 62122 .. 62152 .. 62182 .. 62222 .. 62272 .. 62332 .. 62392 .. 62472 .. 62562 .. 64102 .. 64122 .. 64152 .. 64182 .. 64222 .. 64272 .. 64332 .. 64392 .. 64472 .. 64562 .. 66102 .. 66122 .. 66152 .. 66182 .. 66222 .. 66272 .. 66332 .. 66392 .. 66472 .. 66562
2001 Jun 22
6
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 GENERAL DATA
MKP 338 6 Y2
PITCH 7.5/15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
h
h h'
lt P Odt 10
F' (1) F H Odt
15
Dimensions in mm. (1) F - F' < 0.3 mm F = 7.5 +0.6/-0.1 mm
CBA750
Fig.4 Outline.
Specific reference data for the 300 V AC (Y2) capacitors DESCRIPTION Tangent of loss angle: C 470 nF Rated voltage pulse slope (dU/dt)R at 615 V R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (AC) voltage between leads and case Available 300 V (AC) Y2 versions PACKAGING(1) DIMENSIONS lt = 3.5 0.3 mm Loose in box lt = 5.0 1.0 mm lt = 25.0 2.0 mm Taped on reel; bent back Taped on reel Notes 1. Taped on reel pitch = 27.5 mm is not available. 2. Other dimensions for 10% and 5% tolerance values. 2001 Jun 22 7 H = 16.0 mm; for P0 = 15.0 mm H = 18.5 mm; for P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 338 60... 2222 338 61...; note 2 2222 338 6....; note 2 2222 338 62... 2222 338 63...; note 2 2222 338 6....; note 2 2222 338 64... 2222 338 65...; note 2 2222 338 6....; note 2 2222 338 66... 2222 338 67...; note 2 2222 338 6....; note 2 2222 338 6.... 2222 338 6....; note 2 2222 338 6....; note 2 ORDERING preferred on request on request preferred on request on request preferred on request on request preferred on request on request on request on request on request at 1 kHz 10 x 10-4 VALUE at 10 kHz at 100 kHz 20 x 10-4 100 x 10-4 100 V/s >15000 M >5000 s >30000 M 3400 V; 1 minute 2100 V; 1 minute
20% 10% 5% 20% 10% 5% 20% 10% 5% 20% 10% 5% 20% 10% 5%
BCcomponents
Product specification
Interference suppression film capacitors
URac = 300 V (Y2); URdc = 1000 V
MKP 338 6 Y2
loose and taped
CATALOGUE NUMBER LOOSE IN BOX C(1) (F) DIMENSIONS(2) b x h (h') x l (mm) MASS (g) short leads lt = 3.5 0.3 mm C-tol = 20% catalogue number Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.0068 0.0082 0.01 0.012 0.015 0.018 6.0 x 12.0 (14.0) x 17.5 1.4 5.0 x 11.0 (12.0) x 17.5 1.2 2222 338 60682 2222 338 60822 2222 338 60103 2222 338 60123 2222 338 60153 2222 338 60183 .. 62682 .. 62822 .. 62103 .. 62123 .. 62153 .. 62183 .. 64682 .. 64822 .. 64103 .. 64123 .. 64153 .. 64183 last 5 digits long leads lt = 5.0 1.0mm lt = 25.0 2.0mm REEL H = 16.0 mm; P0 = 15.0 mm C-tol = 20% last 5 digits pitch = 7.5 mm (bent back) .. 66682 .. 66822 .. 66103 .. 66123 .. 66153 .. 66183 pitch = 7.5 mm (bent back) 1.9 2.6 3.1 2222 338 60223 2222 338 60273 2222 338 60333 2222 338 60393 2222 338 60473 2222 338 60563 .. 62223 .. 62273 .. 62333 .. 62393 .. 62473 .. 62563 .. 64223 .. 64273 .. 64333 .. 64393 .. 64473 .. 64563 .. 66223 .. 66273 .. 66333 .. 66393 .. 66473 .. 66563 pitch = 7.5 mm (bent back) 2222 338 60683 2222 338 60823 2222 338 60104 2222 338 60124 2222 338 60154 .. 62683 .. 62823 .. 62104 .. 62124 .. 62154 .. 64683 .. 64823 .. 64104 .. 64124 .. 64154 pitch = 7.5 mm (bent back) 2222 338 60184 2222 338 60224 2222 338 60274 2222 338 60334 2222 338 60394 2222 338 60474 .. 62184 .. 62224 .. 62274 .. 62334 .. 62394 .. 62474 .. 64184 .. 64224 .. 64274 .. 64334 .. 64394 .. 64474 not available not available
Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.022 0.027 0.033 0.039 0.047 0.056 7.0 x 13.5 (15.0) x 17.5 8.5 x 15.0 (17.0) x 17.5 10.0 x 16.5 (18.5) x 17.5
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.068 0.082 0.1 0.12 0.15 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0
4.4 5.5 7.8
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.18 0.22 0.27 0.33 0.39 0.47 Notes 1. Under development. 2. Dimensions in brackets for bent back leads. 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 18.0 x 28.0 x 31.0 7.8 10.4 12.8 17.2 20.4
2001 Jun 22
8
BCcomponents
Product specification
Interference suppression film capacitors
CONSTRUCTION Description
MKP 338 6 Y2
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
* Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant case * Radial leads, solder-coated * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board.
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board:
* For pitches 15 mm capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
144x12(halfpage)
3 SECTIONS
metal spray layer
The maximum length and width of film capacitors is shown in Fig.7:
* Eccentricity as in Fig.7. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. * Product height with seating plane as given by "IEC 60717" as reference: hmax h + 0.3 mm or hmax h' + 0.3 mm.
MKP metallised polypropylene film
connecting wire
CBA313
Fig.5 Construction for pitch = 7.5 mm.
144x12(halfpage) bmax = b + 0.3 mm eccentricity
144x12(halfpage)
2 SECTIONS
metal spray layer
lmax = l + 0.3 mm
CBA116
Fig.7 Lay-out. Storage temperature
MKP metallised polypropylene film connecting wire
CBA312
* Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
Fig.6 Construction for pitch > 7.5 mm. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". 2001 Jun 22 9
BCcomponents
Product specification
Interference suppression film capacitors
CHARACTERISTICS Capacitance
MKP 338 6 Y2
CBA505
296x12(full_width) 4 C/C (%) 2 typical
0
max. -2
-4
min. -6 -50 0 50 Tamb (C) 100
Fig.8 Capacitance change at 1 kHz as a function of temperature. Tangent of loss angle
CBB345
296x12(full_width) 10 3 dissipation factor (x 10-4)
10 2
C>
47 n F<
220
C
nF
220 nF
10 1
nF 47 F10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.9 Tangent of loss angle as a function of frequency: typical curves.
2001 Jun 22
10
BCcomponents
Product specification
Interference suppression film capacitors
Impedance
MKP 338 6 Y2
296x12(full_width) 10 3 Impedance () 10 2
CBB321
1 nF 4.7 10 nnF F
10 1
47 n F 100 nF
470 nF
10 0
10-1
10-2 10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.10 Impedance as a function of frequency: typical curves for 20% values. Resonant frequency
2 296x12(full_width) 10
CBB322
f (MHz)
10 1
Y2 10 0
10
-1
1nF
10 nF
100 nF
1000 nF
C (nF)
Fig.11 Resonant frequency as a function of capacitance: typical curves for 20% values.
2001 Jun 22
11
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb 105 C
296x12(full_width) 10 3 AC voltage (V)
CBB187
10 2
10 1 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.12 AC voltage (RMS value) as a function of frequency at Tamb 105 C.
3 296x12(full_width) 10
CBB320
AC current (mA) 10 2
100 nF 47 nF
10 1
10 nF 4.7 nF
10 0
1 nF
10 -1 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.13 AC current (RMS value) as a function of frequency at Tamb 105 C.
2001 Jun 22
12
BCcomponents
Product specification
Interference suppression film capacitors
Insulation resistance
MKP 338 6 Y2
296x12(full_width) 10 6 RC (s)
CBA204
10 5
10 4 0 20 40 60 80 Tamb(C) 100
Fig.14 RC product as a function of ambient free air temperature: typical curve.
APPLICATION NOTES
* For Y2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 300 V (AC) 10% instability. * These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 ..... * The maximum ambient temperature must not exceed 105 C. * Rated voltage pulse slope:
- If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V (DC) and divided by the applied voltage.
2001 Jun 22
13
BCcomponents
Product specification
Interference suppression film capacitors
MARKING Product marking The capacitors are marked (see Figs 15 to 17) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance; M = 20%; K = 10%; J = 5% 3. Rated (AC) voltage (e.g. 300 V) 4. Sub-class (e.g. Y2) 5. Manufacturer's type designation (e.g. 338 6) 6. Code for dielectric material (MKP) for capacitors with original pitch = 15, 22.5 and 27.5 mm 7. Manufacturer (BC) 8. Year and week of manufacture (e.g. 0133).
144x12(halfpage)
MKP 338 6 Y2
144x12(halfpage)
FRONT FACE
1n0 M 300V~ 338 6 BC 0133
Y2
02
250V~
R
CBB323
Fig.15 Example of marking for a capacitor with original pitch = 7.5 and 10 mm.
HEAD FACE
FRONT FACE
33n M 338 6
MKP
BC 0133
300V~ 250V~
Y2
R
02
CBB324
Fig.16 Example of marking for a capacitor with original pitch = 15 mm.
HEAD FACE
144x12(halfpage) 150n M 300V ~ 338 6 MKP 02 BC 0133 Y2
250V~
R
CBB325
Fig.17 Example of marking for a capacitor with original pitch = 22.5 or 27.5 mm.
2001 Jun 22
14
BCcomponents
Product specification
Interference suppression film capacitors
Package marking The package containing the capacitors is marked as shown Fig.18.
MKP 338 6 Y2
Barcode label marking LINE 1 2 3 4 5 6 7 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description and sub class Capacitance value, tolerance, voltage and climatic category ("IEC 60068-1") Safety approvals Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection (only for capacitors with original pitch = 7.5 and 10 mm) Product type description Quantity and production period, year and week code Product code (12NC)
8 9 10
Fig.18 Barcode label.
2001 Jun 22
15
BCcomponents
Product specification
Interference suppression film capacitors
QUICK REFERENCE TEST REQUIREMENTS TEST Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" Robustness of component Rapid change of temperature: 5 cycles "IEC 60068-2-14" 1 cycle = 30 minutes at -55 C and 30 minutes at 105 C Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" Voltage proof: "IEC 60384-14" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH no load Vp = 2250 V (DC); 1 minute Vp = 2250 V (DC); 1 minute 2 hours; -55 C 16 hours; 105 C 10 to 55 Hz; amplitude 0.75 mm; 6 hours half sinewave; 490 m/s2; 11 ms load 10 N; 10 s load 5 N; 4 x 90 solder bath: 260 C; 10 s PROCEDURE (quick reference)
MKP 338 6 Y2
REQUIREMENTS
no visible damage legible marking
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Component solvent resistance isopropyl alcohol; 23 C; 5 minutes
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
Endurance (AC): "IEC 60384-14"
3 x 5 kV pulse voltage 1000 hours; 1.7 x URac at 105 C; once per hour; 0.1 s; 1000 V (RMS) via resistor of 47 ; Vp = 2250 V (DC); 1 minute
|C/C| 10% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
2001 Jun 22
16
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 6 Y2
TEST Charge and discharge: "IEC 60384-14"
PROCEDURE (quick reference) 10000 cycles; 5 ms; 1.5 x dV/dt
REQUIREMENTS
|C/C| 10% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
Passive flammability: "IEC 60384-14" Active flammability: "IEC 60384-14" Heat storage: "IEC 60384-14" Resistance to soldering heat with preheating: "IEC 60384-14" Active flammability test
class B 20 x 5 kV discharge 1000 hours; 105 C
no burning no burning
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
preheating: 105 C; solder bath: 260 C; 10 s voltage proof up to 2 x peak impulse voltage of 4.13 or until breakdown (100 V/sec, current limited 2mA) failed capacitors connected to a 250 V (AC) power supply during 5 minutes.
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
no burning
Note 1. Measuring frequency 10 kHz for C 1 F and 1 kHz for C > 1 F.
2001 Jun 22
17

▲Up To Search▲

Price & Availability of MKP3386Y2

	To Download MKP3386Y2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .