|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) 1200V 75A APT75DQ120B APT75DQ120S APT75DQ120BG* APT75DQ120SG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (B) TO PRODUCT APPLICATIONS * Anti-Parallel Diode -Switchmode Power Supply -Inverters * Free Wheeling Diode -Motor Controllers -Converters -Inverters * Snubber Diode * PFC PRODUCT FEATURES * Ultrafast Recovery Times * Soft Recovery Characteristics PRODUCT BENEFITS * Low Losses * Low Noise Switching 1 2 -2 4 7 D3PAK * Cooler Operation * Popular TO-247 Package or Surface Mount D3PAK Package * Higher Reliability Systems * Low Forward Voltage * Low Leakage Current * Avalanche Energy Rated * Increased System Power Density 1 2 (S) 1 2 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM EAVL TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings: TC = 25C unless otherwise specified. APT75DQ120B(G)_S(G) UNIT 1200 Volts Maximum Average Forward Current (TC = 113C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45C, 8.3ms) Avalanche Energy (1A, 40mH) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 75 121 540 20 -55 to 175 300 mJ C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 75A VF Forward Voltage IF = 150A IF = 75A, TJ = 125C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 2.8 3.48 2.17 3.1 Volts VR = 1200V VR = 1200V, TJ = 125C 100 500 50 053-4229 Rev B pF 8-2005 A DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 75A, diF/dt = -1000A/s VR = 800V, TC = 125C IF = 75A, diF/dt = -200A/s VR = 800V, TC = 125C IF = 75A, diF/dt = -200A/s VR = 800V, TC = 25C Test Conditions IF = 1A, diF/dt = -100A/s, VR = 30V, TJ = 25C MIN - APT75DQ120B(G)_S(G) TYP MAX UNIT ns nC 32 325 715 5 420 3340 13 195 5810 42 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RJC WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Package Weight MIN TYP MAX UNIT C/W oz g .31 0.22 5.9 10 1.1 lb*in N*m Torque Maximum Mounting Torque APT Reserves the right to change, without notice, the specifications and information contained herein. 0.35 , THERMAL IMPEDANCE (C/W) 0.30 0.25 0.7 0.20 0.15 0.10 0.05 0 10-5 0.5 0.3 0.1 0.05 10-4 Note: D = 0.9 PDM t1 t2 SINGLE PULSE Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC Z JC t 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp. (C) 0.0225 0.00436 8-2005 Power (watts) 0.123 0.0115 053-4229 Rev B 0.165 Case temperature. (C) 0.117 FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 200 180 IF, FORWARD CURRENT (A) 160 140 120 100 80 60 40 20 0 0 TJ = 25C TJ = -55C TJ = 175C TJ = 125C trr, REVERSE RECOVERY TIME (ns) 500 150A 400 APT75DQ120B(G)_S(G) T = 125C J V = 800V R 75A 300 37.5A 200 100 1.0 2.0 3.0 4.0 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 8000 Qrr, REVERSE RECOVERY CHARGE (nC) 7000 6000 5000 75A 4000 3000 2000 1000 0 37.5A T = 125C J V = 800V R 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/s) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 50 T = 125C J V = 800V R 0 150A 150A 40 30 20 75A 10 37.5A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 trr IRRM 0.8 0.6 0.4 0.2 0.0 Qrr 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 5. Reverse Recovery Current vs. Current Rate of Change 140 120 100 Duty cycle = 0.5 T = 175C J 0 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/s) 1.0 IF(AV) (A) trr 80 60 40 20 Qrr 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 6. Dynamic Parameters vs. Junction Temperature 350 0 75 100 125 150 175 Case Temperature (C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50 CJ, JUNCTION CAPACITANCE (pF) 300 250 200 150 100 50 8-2005 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 1 053-4229 Rev B Vr +18V 0V D.U.T. 30H diF /dt Adjust APT10035LLL APT75DQ120B(G)_S(G) trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) D PAK Package Outline e3 100% Sn 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05(.632) 13.30 (.524) 13.60(.535) 3 Cathode (Heat Sink) 1.00 (.039) 1.15(.045) Cathode 20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150) 18.70 (.736) 19.10 (.752) 0.40 (.016) 0.65 (.026) 12.40 (.488) 12.70 (.500) 8-2005 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 19.81 (.780) 20.32 (.800) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) 2.40 (.094) 2.70 (.106) (Base of Lead) 053-4229 Rev B Anode 2.21 (.087) 2.59 (.102) Heat Sink (Cathode) and Leads are Plated Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) Anode Cathode Dimensions in Millimeters (Inches) APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. |
Price & Availability of APT75DQ120SG |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |