 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Features * * * * * Instant Prototype With the AT43312A Hub Controller Reduce Design Cycle Reduce System Debugging Simplify Component Selection Avoid Typical Design Problems Overview The AT43DK312A comes with everything designers need to develop a full-featured USB Hub. To eliminate typical prototyping hassles, a fully populated stand-alone hub is included. Designers can take the stand-alone hub from the box to the system to see the operation of the AT43312A hub controller chip. An application note explains the component selection and resolves typical problems for the designer. USB Hub Development Kit AT43DK312A Rev. 1641A-04/00 1 Stand-alone Hub The hub may immediately be plugged into any USB system. The only requirements are that the system has an operational USB port and that the system has the USB drivers enabled on the operating system. The bus-powered portion of the controller will configure without the power supply attached. However, the power supply must be connected if the devices are to be attached to the downstream ports. Next, connect the upstream port to the USB connector on the computer. Windows will flash a "New Hardware Found" box indicating the "Atmel USB Hub" was detected and automatically load the generic USB hub drivers. USB check tests or downstream devices can then be used on the configured hub. Documentation The application note covers the latest information detailing how to design a USB hub with the AT43312A chip. Expla- nations of component selection, USB hub requirements, and design insights will assist designers in smoothly integrating a USB hub onto existing or new designs. By understanding the reference design, layout and component selection may be optimized for specific design constraints. Included: * Application Note * Reference Design Schematics * Bill of Materials * AT43312A Datasheet * Bus- or Self-powered Operation (Jumper Selectable) * USB Cable * Power Supply 2 AT43DK312A Atmel Headquarters Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL (408) 441-0311 FAX (408) 487-2600 Atmel Operations Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL (719) 576-3300 FAX (719) 540-1759 Europe Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL (44) 1276-686-677 FAX (44) 1276-686-697 Atmel Rousset Zone Industrielle 13106 Rousset Cedex France TEL (33) 4-4253-6000 FAX (33) 4-4253-6001 Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL (852) 2721-9778 FAX (852) 2722-1369 Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 Fax-on-Demand North America: 1-(800) 292-8635 International: 1-(408) 441-0732 literature@atmel.com Web Site http://www.atmel.com BBS 1-(408) 436-4309 (c) Atmel Corporation 2000. Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty which is detailed in Atmel's Terms and Conditions located on the Company's web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel's products are not authorized for use as critical components in life suppor t devices or systems. Marks bearing (R) and/or TM are registered trademarks and trademarks of Atmel Corporation. Printed on recycled paper. 1641A-04/00/xM Terms and product names in this document may be trademarks of others. |
Price & Availability of AT43DK312A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |