View RP03-0512DG_530066.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features
Regulated Converters

2:1 Wide Input Voltage Range 3 Watts Regulated Output Power 1.6kVDC Isolation Suffix "H "3kVDC Isolation Low Profile, 10.2 mm Height Over Current Protection Five-Sided Shield No Derating to 71C Non-Conductive Black Plastic International Safety Standard Approvals Standard DIP24 and SMD-Pinning High Efficiency to 80%
POWERLINE
DC/DC-Converter
RP03S_DG Series
3 Watt DIP24 & SMD, Single & Dual Output
Selection Guide 5V, 12V, 24V and 48V Input Types
Part Number DIP24 (SMD) RP03-053.3SG** RP03-0505SG** RP03-0512SG** RP03-0515SG** RP03-123.3SG** RP03-1205SG** RP03-1212SG** RP03-1215SG** RP03-243.3SG** RP03-2405SG** RP03-2412SG** RP03-2415SG** RP03-483.3SG** RP03-4805SG** RP03-4812SG** RP03-4815SG** RP03-0505DG** RP03-0512DG** RP03-0515DG** RP03-1205DG** RP03-1212DG** RP03-1215DG** RP03-2405DG** RP03-2412DG** RP03-2415DG** RP03-4805DG** RP03-4812DG** RP03-4815DG** Input Range VDC 4.5-6 4.5-6 4.5-6 4.5-6 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 4.5-6 4.5-6 4.5-6 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Output Voltage VDC 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 5 12 15 5 12 15 5 12 15 5 12 15 Output Current mA 600 600 250 200 600 600 250 200 600 600 250 200 600 600 250 200 300 125 100 300 125 100 300 125 100 300 125 100 Input (4) Current mA 649 909 835 845 266 353 333 343 123 174 164 164 61 88 84 84 870 845 870 348 338 333 172 167 167 86 84 84 Efficiency(5) % 66 70 76 75 70 75 79 77 71 76 80 80 72 75 79 79 73 75 73 76 78 79 77 79 79 77 79 79 Capacitive(6) Load max. F 2200 1000 170 110 2200 1000 170 100 2200 1000 170 100 2200 1000 170 100 500 96 47 500 96 47 500 96 47 500 96 47
** add Suffix SMD for SMD package
186
April-2005
www.recom-international.com
POWERLINE
DC/DC-Converter
RP03-S_DG Series
RP03-4805SG
125 100 75 Output Power (%) 50 25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (C) 71 0 -25
Derating-Graph (Ambient Temperature)
Natural Convection
Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
Specifications (typical at nominal input and 25C unless otherwise noted)
Input Voltage Range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5-6VDC 9-18VDC 18-36VDC 36-75VDC Pi Type 5V Input 12V Input 24V Input 48V Input 15VDC 36VDC 50VDC 100VDC 120mAp-p 30ms typ. 3W max. 2% 10% of FL 0.2% Single Dual 0.2% 2% 5% 3.3V, 5V others Temperature Coefficient Transient Response (25% load step change) 75mVp-p 1%/p-p of Vout max. 0.02%/C, max. 500S continued on next page April-2005
Input Filter Input Surge Voltage (100 ms max.)
Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Output Power Output Voltage Accuracy (full Load and nominal Vin) Minimum Load (see Note 1) Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) Cross Regulation (asymmetrical load 25%/100% FL) Ripple and Noise (20MHz bandwith)
www.recom-international.com
187
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25C unless otherwise noted)
Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Operating Temperature Range Storage Temperature Range Thermal Shock Vibration Relative Humidity Case Material Base Material Potting Material Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity Weight Dimensions MTBF (see note 2) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 DIP SMD DIP SMD In to out Standard Suffix /H
RP03-S_DG Series
180% typ Continuous, automatic recovery see Selection Guide" table 1.600VDC min. 3.000VDC min. 109 min. 300pF max. 100kHz min. -25C to +71C -55C to +105C MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Non-conductive black plastic Non-conductive black plastic Epoxy (UL94-V0) Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 14g 15g 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.690 x 106 Hours
Notes :
1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). H 3. Suffix "H" for 3.000VDC Isolation 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering.
188
April-2005
www.recom-international.com
POWERLINE
DC/DC-Converter
Package Style and Pinning (mm)
DIP24 Package Style
RP03-S_DG Series
3rd angle projection 20.30
31.80
10.20 3.8 4.60 17.80 5.10 15.20
Pin Connections Pin # 2 3 9 10 11 14 15 16 22 23 NC = No Connection Single -Vin -Vin NC NC NC +Vout NC -Vout +Vin +Vin Dual -Vin -Vin Com NC -Vout +Vout NC Com +Vin +Vin
0.25 x 0.50 Rectangular Pin 23 Bottom View 23 22 16 15 14 9 10 11
Pin Pitch Tolerance 0.35 mm
SMD Package Style
32.00 31.40 11.20 10.90 3.81 6.35
20.30
SMD Package Style
Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin.
2.54
21.30 25.40
Pin Connections Pin # Single -Vin -Vin NC NC NC +Vout NC -Vout +Vin +Vin NC Dual -Vin -Vin Com NC -Vout +Vout NC Com +Vin +Vin NC
Pin area 0.1 x 0.50
12345
0.50
9 10 11 12
2.54
1.60 2.40
23.40
Bottom View
24 23 22 21 20 16 15 14 13
26.54 24.14
1
Top View
2 3 9 10 11 14 15 16 22 23 Others NC = No Connection
11 x 2.54
27.94
Pin Pitch Tolerance 0.35 mm
www.recom-international.com
April-2005
189

▲Up To Search▲

Price & Availability of RP03-0512DG

	To Download RP03-0512DG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .