View 74LVC3GU04_523853.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74LVC3GU04
Triple inverter
Rev. 03 -- 01 February 2005 Product data sheet
1. General description
The 74LVC3GU04 is a high-performance, low-power, low-voltage, Si-gate CMOS device superior to most advanced CMOS compatible TTL families. Input can be driven from either 3.3 V or 5 V devices. These features allow the use of these devices in a mixed 3.3 V and 5 V environment. The 74LVC3GU04 provides three inverters. Each inverter is a single stage with unbuffered output.
2. Features
s s s s Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant input/output for interfacing with 5 V logic High noise immunity Complies with JEDEC standard: x JESD8-7 (1.65 V to 1.95 V) x JESD8-5 (2.3 V to 2.7 V) x JESD8-B/JESD36 (2.7 V to 3.6 V). ESD protection: x HBM EIA/JESD22-A114-B exceeds 2000 V x MM EIA/JESD22-A115-A exceeds 200 V. 24 mA output drive at VCC = 3.0 V CMOS low power consumption Latch-up performance exceeds 250 mA Multiple package options Specified from -40 C to +85 C and from -40 C to +125 C.
s
s s s s s
Philips Semiconductors
74LVC3GU04
Triple inverter
3. Quick reference data
Table 1: Quick reference data GND = 0 V; Tamb = 25 C. Symbol Parameter Conditions Min VCC = 3.3 V
[1] [2]
Typ 2.3 1.8 2.6 2.3 1.7 5 7
Max -
Unit ns ns ns ns ns pF pF
CL = 30 pF; RL = 1 k; tPHL, tPLH propagation delay inputs nA to outputs nY VCC = 1.8 V CL = 30 pF; RL = 500 ; VCC = 2.5 V CL = 50 pF; RL = 500 ; VCC = 2.7 V CL = 50 pF; RL = 500 ; VCC = 3.3 V CL = 50 pF; RL = 500 ; VCC = 5.0 V CI CPD
[1]
input capacitance power dissipation capacitance per gate
-
CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. The condition is VI = GND to VCC.
[2]
4. Ordering information
Table 2: Ordering information Package Temperature range 74LVC3GU04DP -40 C to +125 C 74LVC3GU04DC -40 C to +125 C 74LVC3GU04GT -40 C to +125 C Name TSSOP8 VSSOP8 XSON8 Description plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm plastic very thin shrink small outline package; 8 leads; body width 2.3 mm plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm Version SOT505-2 SOT765-1 SOT833-1 Type number
5. Marking
Table 3: Marking codes Marking code VU04 VU4 VU4
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Type number 74LVC3GU04DP 74LVC3GU04DC 74LVC3GU04GT
9397 750 14546
Product data sheet
Rev. 03 -- 01 February 2005
2 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
6. Functional diagram
1 1 1A 1Y 7
1
7
3
2A
2Y
5
3
1
5
6
3A
3Y
2 6 1 2
mna720 mna721
Fig 1. Logic symbol
Fig 2. IEC logic symbol
VCC
VCC
100
A
Y
mna636
Fig 3. Logic diagram (one gate)
7. Pinning information
7.1 Pinning
U04
1A 1 8 VCC
1A 3Y 2A GND
1 2 3 4
mnb120
8
VCC 1Y 3A 2Y
3Y
2
7
1Y
U04
7 6 5
2A
3
6
3A
GND
4
5
2Y
001aac021
Transparent top view
Fig 4. Pin configuration TSSOP8 and VSSOP8
Fig 5. Pin configuration XSON8
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
3 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
7.2 Pin description
Table 4: Symbol 1A 3Y 2A GND 2Y 3A 1Y VCC Pin description Pin 1 2 3 4 5 6 7 8 Description data input data output data input ground (0 V) data output data input data output supply voltage
8. Functional description
8.1 Function table
Table 5: Input nA L H
[1] H = HIGH voltage level; L = LOW voltage level.
Function table [1] Output nY H L
9. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC VI VO IIK IOK IO Parameter supply voltage input voltage output voltage input diode current output diode current output source or sink current storage temperature power dissipation Tamb = -40 C to +125 C active mode VI < 0 V VO > VCC or VO < 0 V VO = 0 V to VCC
[1] [1]
Conditions
Min -0.5 -0.5 -0.5 -65 -
Max +6.5 +6.5 VCC + 0.5 -50 50 50 100 +150 300
Unit V V V mA mA mA mA C mW
ICC, IGND VCC or GND current Tstg Ptot
[1]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
4 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
10. Recommended operating conditions
Table 7: Symbol VCC VI VO Recommended operating conditions Parameter supply voltage input voltage output voltage active mode Power-down mode; VCC = 0 V Tamb tr, tf ambient temperature input rise and fall times VCC = 1.65 V to 2.7 V VCC = 2.7 V to 5.5 V Conditions Min 1.65 0 0 0 -40 0 0 Typ Max 5.5 5.5 VCC 5.5 +125 20 10 Unit V V V V C ns/V ns/V
11. Static characteristics
Table 8: Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol VIH VIL VOH Parameter C [1] VCC = 1.65 V to 5.5 V VCC = 1.65 V to 5.5 V VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V VOL LOW-level output voltage VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V ILI ICC CI input leakage current quiescent supply current input capacitance VI = 5.5 V or GND; VCC = 5.5 V VI = VCC or GND; IO = 0 A; VCC = 5.5 V 0.1 0.1 5 0.1 0.45 0.3 0.4 0.55 0.55 5 10 V V V V V V A A pF VCC - 0.1 1.2 1.9 2.2 2.3 3.8 V V V V V V 0.75 x VCC V 0.25 x VCC V HIGH-level input voltage LOW-level input voltage HIGH-level output voltage Conditions Min Typ Max Unit Tamb = -40 C to +85
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
5 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
Table 8: Static characteristics ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol VIH VIL VOH Parameter HIGH-level input voltage LOW-level input voltage HIGH-level output voltage Conditions VCC = 1.65 V to 5.5 V VCC = 1.65 V to 5.5 V VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V VOL LOW-level output voltage VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V ILI ICC input leakage current quiescent supply current VI = 5.5 V or GND; VCC = 5.5 V VI = VCC or GND; IO = 0 A; VCC = 5.5 V 0.1 0.70 0.45 0.60 0.80 0.80 20 40 V V V V V V A A VCC - 0.1 0.95 1.7 1.9 2.0 3.4 V V V V V V Min 0.8 x VCC Typ Max 0.2 x VCC Unit V V Tamb = -40 C to +125 C
[1]
All typical values are measured at Tamb = 25 C.
12. Dynamic characteristics
Table 9: Dynamic characteristics GND = 0 V; for test circuit see Figure 7. Symbol tPHL, tPLH Parameter C [1] see Figure 6 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V CPD power dissipation capacitance per gate VCC = 3.3 V
[2] [3]
Conditions
Min
Typ
Max
Unit
Tamb = -40 C to +85
propagation delay nA to nY
0.5 0.3 0.3 0.3 0.3 -
2.3 1.8 2.6 2.3 1.7 7
5.0 4.0 4.5 3.7 3.0 -
ns ns ns ns ns pF
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
6 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
Table 9: Dynamic characteristics ...continued GND = 0 V; for test circuit see Figure 7. Symbol tPHL, tPLH Parameter propagation delay nA to nY Conditions see Figure 6 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V
[1] [2] All typical values are measured at nominal VCC and Tamb = 25 C. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. The condition is VI = GND to VCC.
Min
Typ
Max
Unit
Tamb = -40 C to +125 C 0.5 0.3 0.3 0.3 0.3 6.3 4.0 5.6 4.5 3.8 ns ns ns ns ns
[3]
13. Waveforms
VI nA input GND t PHL VOH nY output VOL VM
mna344
VM
t PLH
Measurement points are given in Table 10. VOL and VOH are typical output voltage drop that occur with the output load.
Fig 6. The input (nA) to output (nY) propagation delays Table 10: VCC 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V Measurement points Input VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC Output VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC
Supply voltage
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
7 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
VEXT VCC PULSE GENERATOR VI D.U.T. RT CL RL VO RL
mna616
Test data is given in Table 11. RL = Load resistor. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig 7. Load circuitry for switching times Table 11: VCC 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V Test data Input VI VCC VCC 2.7 V 2.7 V VCC tr, tf 2.0 ns 2.0 ns 2.5 ns 2.5 ns 2.5 ns Load CL 30 pF 30 pF 50 pF 50 pF 50 pF RL 1 k 500 500 500 500 VEXT tPLH, tPHL open open open open open
Supply voltage
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
8 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
14. Additional characteristics
Rbias = 560 k
VCC
0.47 F
input
output
100 F
VI (f = 1 kHz)
A IO GND
mna050
I o g fs = -------V i
VO is constant.
Fig 8. Test set-up for measuring forward transconductance
160 gfs (mA/V) 120
mnb108
80
40
0 0 1 2 3 4 5 6 VCC (V)
Tamb = 25 C.
Fig 9. Typical forward transconductance as a function of supply voltage
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
9 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
15. Application information
Some applications for the 74LVC3GU04 are:
* Linear amplifier (see Figure 10) * Crystal oscillator (see Figure 11).
Remark: All values given are typical values unless otherwise specified.
R2
VCC
1 F R1
U04
ZL
mna052
ZL > 10 k. R1 3 k. R2 1 M. Open loop amplification: AOL = 20. Voltage amplification: A V = - ---------------------------------------- . -
A OL R1 1 + ------ ( 1 + A OL ) R2
Vo(p-p) = VCC - 1.5 V centered at 0.5 x VCC. Unity gain bandwidth product is 5 MHz.
Fig 10. Linear amplifier application
R1
R2
U04
C1 C2
out
mna053
C1 = 47 pF. C2 = 22 pF. R1 = 1 M to 10 M. R2 optimum value depends on the frequency and required stability against changes in VCC or average minimum ICC (ICC = 2 mA at VCC = 3.3 V and f = 10 MHz).
Fig 11. Crystal oscillator application
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
10 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
16. Package outline
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2
D
E
A
X
c y HE vMA
Z
8
5
A pin 1 index
A2 A1
(A3)
Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1.1 A1 0.15 0.00 A2 0.95 0.75 A3 0.25 bp 0.38 0.22 c 0.18 0.08 D(1) 3.1 2.9 E(1) 3.1 2.9 e 0.65 HE 4.1 3.9 L 0.5 Lp 0.47 0.33 v 0.2 w 0.13 y 0.1 Z(1) 0.70 0.35 8 0
Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 REFERENCES IEC JEDEC --JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16
Fig 12. Package outline SOT505-2 (TSSOP8)
9397 750 14546 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
11 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
SOT765-1
D
E
A X
c y HE vMA
Z
8
5
Q A pin 1 index A2 A1 (A3) Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1 A1 0.15 0.00 A2 0.85 0.60 A3 0.12 bp 0.27 0.17 c 0.23 0.08 D(1) 2.1 1.9 E(2) 2.4 2.2 e 0.5 HE 3.2 3.0 L 0.4 Lp 0.40 0.15 Q 0.21 0.19 v 0.2 w 0.13 y 0.1 Z(1) 0.4 0.1 8 0
Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 REFERENCES IEC JEDEC MO-187 JEITA EUROPEAN PROJECTION
ISSUE DATE 02-06-07
Fig 13. Package outline SOT765-1 (VSSOP8)
9397 750 14546 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
12 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm
SOT833-1
1
2
3
b 4 4x L
(2)
L1
e
8 e1
7 e1
6 e1
5
8x
(2)
A
A1 D
E
terminal 1 index area 0 DIMENSIONS (mm are the original dimensions) UNIT mm A (1) max 0.5 A1 max 0.04 b 0.25 0.17 D 2.0 1.9 E 1.05 0.95 e 0.6 e1 0.5 L 0.35 0.27 L1 0.40 0.32 1 scale 2 mm
Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE VERSION SOT833-1 REFERENCES IEC --JEDEC MO-252 JEITA --EUROPEAN PROJECTION ISSUE DATE 04-07-22 04-11-09
Fig 14. Package outline SOT833-1 (XSON8)
9397 750 14546 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
13 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
17. Revision history
Table 12: Revision history Release date 20050201 Data sheet status Product data sheet Product data sheet Product data sheet Change notice Doc. number 9397 750 14546 9397 750 13795 9397 750 13191 Supersedes 74LVC3GU04_2 74LVC3GU04_1 Document ID 74LVC3GU04_3 Modifications: 74LVC3GU04_2 74LVC3GU04_1
*
Changed: type number 74LVC3GU04GT.
20041027 20040512
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
14 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
18. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
19. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
20. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
21. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 14546
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 01 February 2005
15 of 16
Philips Semiconductors
74LVC3GU04
Triple inverter
22. Contents
1 2 3 4 5 6 7 7.1 7.2 8 8.1 9 10 11 12 13 14 15 16 17 18 19 20 21 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . 4 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 5 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Additional characteristics . . . . . . . . . . . . . . . . . 9 Application information. . . . . . . . . . . . . . . . . . 10 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 14 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 15 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Contact information . . . . . . . . . . . . . . . . . . . . 15
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 01 February 2005 Document number: 9397 750 14546
Published in The Netherlands

▲Up To Search▲

Price & Availability of 74LVC3GU04

	To Download 74LVC3GU04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .