![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DC/DC Converter TEN 12 Series Features Ultrawide 4 : 1 Input Range 9 - 36 VDC and 18 - 75 VDC Full SMD-Design Input Filter meets EN 55022, Class A and FCC, Level A without external Components Indefinite Short-Circuit Protection Overvoltage Protection I/O-Isolation 1500 VDC 2" x 1" Metal Package Insulated Baseplate Industry Standard Pinout 2 Year Product Warranty 12 Watt The TEN 12 series of DC/DC converters has been designed for a wide range of applications including communications, industrial systems and battery powered mobile equipments. Key features are high power density (12 W in a 2"x1"x 0.4" package) and ultrawide input ranges of 9 - 36 VDC and 18 - 75 VDC. Other features of this converter are internal filtering according to EN 55022, level A, safety approval to EN 60950 and UL 1950, wide operating temperature range and remote on/off (opt.). Models Ordercode TEN 12-2410 TEN 12-2411 TEN 12-2412 TEN 12-2413 TEN 12-2421 TEN 12-2422 TEN 12-2423 TEN 12-4810 TEN 12-4811 TEN 12-4812 TEN 12-4813 TEN 12-4821 TEN 12-4822 TEN 12-4823 Input voltage range Output voltage 3,3 5 12 15 5 12 15 3,3 5 12 15 5 12 15 VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Output current max. 2`400 2`000 1`000 800 1`000 500 400 2`400 2`000 1`000 800 1`000 500 400 mA mA mA mA mA mA mA mA mA mA mA mA mA mA Efficiency typ. 78 % 82 % 84 % 84 % 82 % 84 % 84 % 78 % 82 % 84 % 84 % 82 % 84 % 84 % 9 - 36 VDC 18 - 75 VDC www.tracopower.com Page 1 DC/DC Converter TEN 12 Series 12 Watt Input Specifications Input current (no load) Input current (full load) 24 Vin models 48 Vin models 24 Vin; 24 Vin; 24 Vin; 48 Vin; 48 Vin; 48 Vin; 3.3 Vout models: 5 & 5 Vout models: other output models: 3.3 Vout models: 5 & 5 Vout models: other output models: 40 mA typ. 20 mA typ. 425 mA typ. 510 mA typ. 600 mA typ. 215 mA typ. 255 mA typ. 300 mA typ. 42 V max.. 84 V max. 1.0 A max. EN 55022 level A, FCC part 15, level A 1% 0.5 % max. 0.5 % max. 50 mVpk-pk typ. 0.02 % / C >110% of Iout max. foldback Hiccup mode, indefinite (automatic recovery) 470 F max. 100 F max. - 40 C ... + 60 C + 95 C max. - 40 C ... + 125 C above 60C: 3% /C 95 % rel H max. > 700'000 h @ +25 C 1`500 VDC 200 pF typ > 1`000 M Ohm 400 kHz typ. (Pulse width modulation PWM) ON: OFF: OFF idle current: 2.5 ... 5.5 VDC or open circuit. 0 ... 0.8 VDC or short circuit pin 2 and pin 6 10 mA max. UL 1950, EN 60950, IEC 60950 Compliance up to 60 VDC input voltage (SELV limit) cUL/UL File E188913 Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) 24 Vin models 48 Vin models Output Specifications Voltage set accuracy Regulation - Input variation Vin min. to Vin max. - Load variation 10 - 90 % Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load - single output models - dual output models - Operating - Case temperature - Storage General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Input/Output Input/Output Isolation resistance Input/Output (500 VDC) Switching frequency (fixed) Remote ON/OFF (optional): Safety standards: Safety approvals: All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 12 Series 12 Watt Physical Specifications Case material Baseplate Potting material Weight Soldering temperature Steel chrome-nickel plated Epoxy Silicon rubber (flammability to UL 94 V-0) 30 g (1.2 oz) max. 250 C / 10 sec. Outline Dimensions mm (inches) 50.8 0.5 (2.0 0.02) Pin-Out Pin 1 2 3 (0.4) Single +Vin (Vcc) -Vin (GND) +Vout No pin -Vout Dual +Vin (Vcc) -Vin (GND) +Vout Common -Vout 15.2 (0.598 0.5 0.02) 20.32 (0.8) 10.16 10.16 25.4 0.5 7 .62 5.08 (0.3) (0.2) (0.4) (1.0 3 Bottom View 1 4 2 6 (optional) 5 20.32 (0.8) 0.02) 4 5 6 Remote on/off Remote on/off (option) (option) 0.02) 0.5 (0.098 0.5 (0.098 2.5 2.5 0.02) 6.0 10.2 0.5 Insulated Baseplate Pin diameter o 1.0 0.05 (0.039) 0.002 Specifications can be changed without notice Rev. 07/01 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41-1284 2911 * Fax +41-1201 1168 * e-mail: sales@traco.ch (0.236) (0.402 0.02) * internet: http://www.tracopower.com Page 3 |
Price & Availability of TEN12-4812
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |