 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Global Mixed-mode Technology EV2995-10 G2995 Evaluation Board Manual Introduction The G2995 evaluation board is designed to provide the design engineer with a fully functional prototype system in which to evaluate the G2995 in both a static environment and with a complete memory system. It is one version of the board, which SOP-8L(FD) is used. The application note contains information regarding the board,for more information regarding the G2995 please refer to the datasheet. Schematic The following schematic was used to create the layout. Bill of Material Name U1 Qty 1 Value Description G2995 DDR Linear Regulator Manufacturer Global Mixed-mode Technology http://www.gmt.com.tw SANYO SANYO Model Number G2995 C3, C5 C6 C1, C2 2 1 2 330uf 68uf 0.1uf 6.3V POSCAP Series 6.3V POSCAP Series 6TPD330M 6TPB68M 1068X7R1H104K 0603 Ceramic Capacitor X7R 6.3V TDK Application The G2995 evaluation board can be used immediately in either a static test environment to check functionality or in a memory termination scheme on a motherboard. In either implementation the following steps should be taken to ensure correct operation. 1. Correct leads from the evaluation board. The board layout has been designed to allows sockets to be directly soldered. 2. AVIN and PVIN should be connected to a 2.5V power supply. 3. The VDDQ input provides the internal divide by two reference voltage. Both VREF and VTT will track this internal voltage, nominally a 2.5V will be applied. 4. The VREF pad is the output for the VREF from the G2995 after being bypassed by a ceramic capacitor. This can be connected either to a multi-meter for confirmation or directly to the memory controller and DIMMS. 5. The remaining two pads are for the force and sense leads of the VTT output. These should be connected directly to the termination plane or a multi-meter if interested in verification. The output will be regulated where the VSENSE leads connect to the VTT leads permitting the connection to a motherboard without suffering from large resistance drops. Mar 12, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Performance EV2995-10 The following series of scope plots shows the performance of the G2996 evaluation board when it is subjected to various load tests. On each of the six scope plots there are two traces. The upper trace is the VTT output voltage that has been AC coupled with a scale of 20mV per division. The lower trace is the output current with a scale of 500mA per division. All the load transients begin from an initial condition of zero current and show magnitude. Please refer to the title to determine whether the current flow is into (sinking) or out from (sourcing) the VTT pin. The time scale for all the plots is 2mS per division. ILoad=0.5A Transient(Sinking) ILoad=0.5A Transient(Sourcing) ILoad=1A Transient (Sinking) ILoad=1A Transient(Sourcing) ILoad=1.5A Transient (Sinking) ILoad=1.5A Transient(Sourcing) Mar 12, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 2 Global Mixed-mode Technology Board Layout SOP-8L(FD) Top Side EV2995-10 SOP-8L(FD) Bottom Side Mar 12, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Board Layout (Continuous) Information Board Material Size Board Thickness Layers Copper Thickness Thermal Vias Thermal Vias Size EV2995-10 SOP- 8L(FD) Board FR4 50mmx 50mm 1.6mm 2 2 oz 6 28mil Mar 12, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 4 |
Price & Availability of EVG2995
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |