View 85EPF02J_408468.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin I2152 rev. B 12/02
QUIETIR
85EPF.. Series
FAST SOFT RECOVERY RECTIFIER DIODE IF(RMS) = 160 A VF< 1.35 V @ 100 A trr = 70 nsec VRRM 200 to 600 V
Major Ratings and Characteristics Characteristics
IF(AV) Rect. Conduction 50% duty Cycle @ TC = 85 C IF(RMS) VRRM range (*) IFSM VF trr TJ @ 100 A, TJ = 25C @ 1A, - 100A/s range 160 200 to 600 1100 1.35 70 - 40 to 150 A V A V ns C
Description/ Features Units
A The 85EPF.. fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Available in the new PowIRtab TM package, this new series is suitable for a large range of applications combining excellent die to footprint ratio and sturdeness connectivity for use in high current environments. Typical applications are both: Output rectification and freewheeling in inverters, choppers and converters Input rectifications where severe restrictions on conducted EMI should be met.
85EPF..
85
Case Styles 85EPF.. 85EPF..J
(*) for higher voltage up to 1600V contact factory
www.irf.com
1
85EPF.. QUIETIR Series
Bulletin I2152 rev. B 12/02
Voltage Ratings
VRRM , maximum Part Number peak reverse voltage V
85EPF02 85EPF04 85EPF06 200 400 600
VRSM , maximum non repetitive peak reverse voltage V
300 500 700
IRRM 150C mA
20
Absolute Maximum Ratings
Parameters
I F(AV) Max. Average Forward Current I FSM Max. Peak One Cycle Non Repetitive Surge Current I2t Max. I2t for fusing
85EPF..
85 1100 1250 5000 7000
Units
A A A2s A s
2
Conditions
@ TC =75 C, 180 conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied
I t
2
Max. I t for fusing
2
70000
Electrical Specifications
Parameters
V FM rt Max. Forward Voltage Drop Forward slope resistance
85EPF..
1.3 4.07 0.8 0.1 20
Units
V m V mA
Conditions
@ 85A, TJ = 25C TJ = 150C TJ = 25 C TJ = 150 C
V F(TO) Threshold voltage I RM Max. Reverse Leakage Current
VR = rated VRRM
Recovery Characteristics
Parameters
trr Irr Qrr S Reverse Recovery Time Reverse Recovery Current Reverse Recovery Charge Snap Factor
85EPF..
190 3.5 0.6 0.5
Units
ns A C
Conditions
IF @ 85Apk @ 25A/ s @ 25C
2
www.irf.com
85EPF.. QUIETIR Series
Bulletin I2152 rev.B 12/02
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
85EPF..
- 40 to 150 - 40 to 150 0.35 40 0.2 6 (0.21) Min. Max. 6 (5) 12(10)
Units
C C C/W C/W C/W g (oz.) Kg-cm (Ibf-in)
Conditions
RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style
Maximum Allowable Case Temperature (C)
DC Operation
Mounting surface , smooth and greased
PowIRtabTM
Maximum Allowable Case Temperature (C)
150
85EPF.. Series R thJC (DC) = 0.35 K/W
150
85EPF.. Series R thJC (DC) = 0.35 K/W
120
120
90
180 120 90
90
120 90 30 60
60
60 30 Conduction Angle
60
180 DC
30
30
Conduction Period
0 0 20 40 60 80 100
Average Forward Current (A) Fig. 1 - Current Rating Characteristics
0
0
30
60
90
120
150
Average Forward Current (A)
Fig. 2 - Current Rating Characteristics
Maximum Average Forward Power Loss (W)
160
Maximum Average Forward Power Loss (W)
200 180 160 140 120 100 80 60 40 20 0 0 30 60 90 120 150
Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics Conduction Period 85EPF.. Series T J = 150C DC 180 120 90 60 30 RMS Limit
140 120 100 80 60 40 20 0 0
180 120 90 60 30
RMS Limit
Conduction Angle 85EPF.. Series T J = 150C
30
60
90
120
Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics
www.irf.com
3
85EPF.. QUIETIR Series
Bulletin I2152 rev. B 12/02
Peak Half Wave Forward Current (A)
Peak Half Wave Forward Current (A)
1200
900
At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
1200
900
Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150C No Voltage Reapplied Rated V RRM Reapplied
600
600
300
85EPF.. Series
300
85EPF.. Series
0 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (n)
Fig. 5 - Maximum Non-Repetitive Surge Current
0 0.01
0.1 Pulse Train Duration (s)
1
Fig. 6 - Maximum Non-Repetitive Surge Current
1000
Instantaneous Forward Current (A)
100
TJ = 25C
10
T = 150C J
85EPF.. Series
1 0 1 2 3 4 5
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
Maximum Reverse Recovery Time - Trr (s)
I FM = 80 A 40 A 20 A 10 A
0.2 0.18 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0
85EPF.. Series TJ = 25C
Maximum Reverse Recovery Time - Trr (s)
0.22
1
0.8
85EPF.. Series TJ = 150C
0.6
I FM = 80 A
0.4
20 A
40 A 10 A 1A
1A
0.2
0 0 40 80 120 160 200
Rate Of Fall Of Forward Current - di/dt (A/s)
40
80
120
160
200
Rate Of Fall Of Forward Current - di/dt (A/s)
Fig. 8 -Recovery Time Characteristics, TJ= 25C
Fig. 9 - Recovery Time Characteristics, TJ= 150C
4
www.irf.com
85EPF.. QUIETIR Series
Bulletin I2152 rev.B 12/02
3.5
Maximum Reverse Recovery Charge - Qrr (C) Maximum Reverse Recovery Charge - Qrr (C)
14
I FM = 80 A 40 A 20 A
3 2.5 2 1.5 1 0.5 0 0 40 80
85EPF.. Series TJ = 25 C
12 10 8 6 4 2 0 0 40 80 120 160 200
Rate Of Fall Of Forward Current - di/dt (A/s) 85EPF.. Series TJ = 150 C 80 A 40 A
20 A 10 A 1A
10 A
1A
120
160
200
Rate Of Fall Of Forward Current - di/dt (A/s)
Fig. 10 - Recovery Charge Characteristics, TJ= 25C
Maximum Reverse Recovery Current - Irr (A)
Fig. 11 - Recovery Charge Characteristics, TJ= 150C
Maximum Reverse Recovery Current - Irr (A)
22 20 18 16 14 12 10 8 6 4 2 0 0 40 80 120
85EPF.. Series TJ = 25C
45 40 35 30 25 20 15 10 5 0 0 40 80 120 160 200
Rate Of Fall Of Forward Current - di/dt (A/s) 1A 20 A 10 A 85EPF.. Series TJ = 150C I FM = 80 A 40 A
I FM = 80 A
40 A 20 A 10 A
1A
160
200
Rate Of Fall Of Forward Current - di/dt (A/s)
Fig. 12 - Recovery Current Characteristics, TJ= 25C
Fig. 13 - Recovery Current Characteristics, TJ= 150C
1
Transient Thermal Impedance Z thJC (C/W)
Steady State Value (DC Operation)
0.1
D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08
Single Pulse 85EPF.. Series
0.01 0.0001
0.001
0.01
0.1
1
Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Charact eristics
www.irf.com
5
85EPF.. QUIETIR Series
Bulletin I2152 rev. B 12/02
Outline Table
Case Style PowIRtabTM Dimensions in millimeters and (inches)
Case Style PowIRtabTM "J" version Dimensions in millimeters and (inches)
6
www.irf.com
85EPF.. QUIETIR Series
Bulletin I2152 rev.B 12/02
Ordering Information Table
Device Code Base Cathode BASE 2 CATHODE
85
1
E
2
P
3
F
4
06
5
J
6
1 2 3 4
-
Current Rating Circuit Configuration: E = Single Diode Package: P = TO-247AC Type of Silicon: F = Fast Recovery
CATHODE 1
3 ANODE Anode
Anode
02 = 200V 04 = 400V 06 = 600V
5 6 65
-
Voltage code: Code x 100 = VRRM (*) none=PowIRtab standard J = Short Lead Version66
TM
(*) for higher voltage up to 1600V contact factory
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/02
www.irf.com
7

▲Up To Search▲

Price & Availability of 85EPF02J

	To Download 85EPF02J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .