 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MIG100J101H TOSHIBA Intelligent Power Module Silicon N Channel IGBT MIG100J101H High Power Switching Applications Motor Control Applications l Integrates inverter & control circuits (IGBT drive units, protection units for over-current, under-voltage & over-temperature) in one package. l The electrodes are isolated from case. l High speed type IGBT : VCE (sat) = 2.5 V (Max.) toff = 3.0 s (Max.) trr = 0.30 s (Max.) l Outline : TOSHIBA 2-110A1A l Weight : 520 g Equivalent Circuit 1. 7. GND (U) GND (W) 2. IN (U) 8. IN (W) 14. IN (Y) 3. 9. VD (U) VD (W) 4. GND (V) 10. GND (L) 16. FO 5. IN (V) 6. VD (V) 12. OPEN 11. VD (L) 13. IN (X) 15. IN (Z) 1 2001-05-29 MIG100J101H Maximum Ratings (Tj = 25C) Stage Characteristic Supply voltage Collector-emitter voltage Inverter Collector current Forward current Collector power dissipation Junction temperature Control supply voltage Control Input voltage Fault output voltage Fault output current Operating temperature Module Storage temperature range Isolation voltage Screw torque Condition P-N power terminal Tc = 25C, DC Tc = 25C, DC Tc = 25C VD-GND terminal IN-GND terminal FO-GND (L) terminal FO sink current AC 1 minute, M5 Symbol VCC VCES IC IF PC Tj VD VIN VFO IFO TC Tstg VISO Ratings 450 600 100 100 300 150 20 20 20 14 -20 ~ +100 -40 ~ +125 2500 3 Unit V V A A W C V V V mA C C V N*m Electrical Characteristics (Tj = 25C) a. Inverter Stage Characteristic Collector cut-off current Symbol ICEX Test Condition VCE = 600 V Tj = 25C Tj = 125C Min 0V (Note 1) Typ. 2.0 2.0 2.1 1.0 1.7 0.2 0.1 Max 1 20 2.5 3.3 2.0 3.0 0.5 0.3 s V V Unit mA Collector-emitter saturation voltage Forward voltage VCE (sat) VF ton VD = 15 V, IC = 100 A Tj = 25C VIN = 15 V 0 V Tj = 125C IF = 100 A VCC = 300 V, IC = 100 A VD = 15 V, VIN = 15 V Inductive load Switching time toff tf trr 2 2001-05-29 MIG100J101H b. Control Stage (Tj = 25C) Characteristic Control circuit current High side Low side Symbol ID (H) ID (L) VIN (on) VIN (off) IFO (on) IFO (off) OC VD = 15 V VD = 15 V, IC = 100 mA VD = 15 V, IC = 100 mA VD = 15 V Test Condition Min 1.3 2.2 8 160 Typ. 8 24 1.5 2.5 10 200 Max 1.7 2.8 12 1 Unit mA V V mA Input-on signal voltage Input-off signal voltage Fault output current Over current protection trip level Short current protection trip level Protection Normal Inverter VD = 15 V, Tj = 125C A Inverter SC toff (OC) OT OTr UV UVr tFO VD = 15 V, Tj = 125C VD = 15 V Case temperature 240 110 300 5 118 98 12.0 12.5 2 125 12.5 3 A s C Over current cut-off time Over temperature protection Control supply under voltage protection Trip level Reset level Trip level Reset level VD = 15 V 11.0 1 V ms Fault output pulse width 3 2001-05-29 MIG100J101H c. Thermal Resistance (Tj = 25C) Characteristic Junction to case thermal resistance Case to fin thermal resistance Symbol Rth (j-c) Rth (c-f) Test Condition Inverter IGBT stage Inverter FRD stage Compound is applied Min Typ. 0.05 Max 0.418 1.000 Unit C / W C / W Note 1: Switching time test circuit & timing chart 4 2001-05-29 MIG100J101H 5 2001-05-29 MIG100J101H 6 2001-05-29 MIG100J101H Package Dimensions: TOSHIBA 2-110A1A Unit: mm 7 2001-05-29 MIG100J101H RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 8 2001-05-29 |
Price & Availability of MIG100J101H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |