View 2SC5838_381473.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistors
2SC5838
Silicon NPN epitaxial planar type
For UHF band low-noise amplification Features
* Suitable for high-density mounting and downsizing of the equipment for Ultraminiature leadless package 0.6 mm x 1.0 mm (height 0.39 mm)
Unit: mm
1 1.000.05
0.600.05
3
2
0.39+0.01 -0.03
0.150.05 0.050.03 0.350.01
0.250.05
0.500.05
0.250.05 1
Absolute Maximum Ratings Ta = 25C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Rating 15 10 2 80 100 125 -55 to +125 Unit V V V mA mW C C
3
0.650.01
2 0.050.03
1: Base 2: Emitter 3: Collector ML3-N2 Package
Marking symbol: 1F
Electrical Characteristics Ta = 25C 3C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Collector-base cutoff current (Emitter open) Emitter-base cutoff current (Collector open) Forward current transfer ratio Forward transfer gain Noise figure Maximum unilateral power gain Collector output capacitance (Common base, input open circuited) Transition frequency Symbol VCBO VCEO ICBO IEBO hFE S21e2 NF GUM Cob fT Conditions IC = 10 A, IE = 0 IC = 100 A, IB = 0 VCB = 10 V, IE = 0 VEB = 2 V, IC = 0 VCE = 8 V, IC = 20 mA VCE = 8 V, IC = 20 mA, f = 800 MHz VCE = 8 V, IC = 20 mA, f = 800 MHz VCE = 8 V, IC = 20 mA, f = 800 MHz VCB = 10 V, IE = 0, f = 1 MHz VCE = 8 V, IC = 20 mA, f = 800 MHz 5.0 110 7.5 10.0 1.7 11.5 0.9 6.0 1.2 Min 15 10 1 1 250 Typ Max Unit V V A A dB dB dB pF GHz
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
Publication date: December 2002
SJC00288AED
1
2SC5838
PC Ta
120
IC VCE
Collector-emitter saturation voltage VCE(sat) (V)
90 80 Ta = 25C IB = 600 A 500 A 400 A 60 50 40 30 20 10 200 A 300 A
1
VCE(sat) IC
IC / IB = 10
Collector power dissipation PC (mW)
100
80
Collector current IC (mA)
70
Ta = 85C 0.1 25C -25C
60
40
20
100 A
0
0
0 20 40 60 80 100 120 140
0
2
4
6
8
10
12
0.01
1
10
100
1 000
Ambient temperature Ta (C)
Collector-emitter voltage VCE (V)
Collector current IC (mA)
hFE IC
Collector output capacitance C (pF) (Common base, input open circuited) ob
200 Ta = 85C 160 25C 120 -25C 80 VCE = 8 V
Cob VCB
10 f = 1 MHz Ta = 25C
Forward current transfer ratio hFE
1
40
0
0.1
1 10 100 1 000
0
5
10
15
20
25
Collector current IC (A)
Collector-base voltage VCB (V)
2
SJC00288AED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SC5838

	To Download 2SC5838 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .