Part Number Hot Search : 
SSD1331 APC5860 GS9078A SHEET 05111 SS100 NJM2822F 74AHC
Product Description
Full Text Search
 

To Download CD4027BC Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset
October 1987 Revised March 2002
CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset
General Description
The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. Each flip-flop has independent J, K, set, reset, and clock inputs and buffered Q and Q outputs. These flip-flops are edge sensitive to the clock input and change state on the positive-going transition of the clock pulses. Set or reset is independent of the clock and is accomplished by a high level on the respective input. All inputs are protected against damage due to static discharge by diode clamps to VDD and VSS.
Features
s Wide supply voltage range: s Low power TTL compatibility: or 1 driving 74LS s Low power: 50 nW (typ.) 3.0V to 15V Fan out of 2 driving 74L s High noise immunity: 0.45 VDD (typ.)
s Medium speed operation: 12 MHz (typ.) with 10V supply
Ordering Code:
Order Number CD4027BCM CD4027BCN Package Number M16A N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.
Connection Diagram
Truth Table
Inputs tn-1 (Note 1) CL (Note 3) J I X O X X X X X K X O X I X X X X S O O O O O I O I R O O O O O O I I Q O I O I X X X X I O I Q I I O O Outputs tn (Note 2) Q O O I I (No Change) O I I

X X X
Top View
I = HIGH Level O = LOW Level X = Don't Care = LOW-to-HIGH = HIGH-to-LOW

Note 1: tn-1 refers to the time interval prior to the positive clock pulse transition Note 2: tn refers to the time intervals after the positive clock pulse transition Note 3: Level Change
(c) 2002 Fairchild Semiconductor Corporation
DS005958
www.fairchildsemi.com
CD4027BC
Logic Diagram
www.fairchildsemi.com
2
CD4027BC
Absolute Maximum Ratings(Note 4)
(Note 5) DC Supply Voltage (VDD ) Input Voltage (VIN) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) 260C 700 mW 500 mW
Recommended Operating Conditions (Note 5)
DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) 3V to 15 VDC 0V to VDD VDC
-0.5 VDC to +18 VDC -0.5V to VDD +0.5 VDC -65C to +150C
-55C to +125C
Note 4: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of "Recommended Operating Conditions" and "Electrical Characteristics" provides conditions for actual device operation. Note 5: VSS = 0V unless otherwise specified.
DC Electrical Characteristics (Note 6)
Symbol IDD Parameter Quiescent Device Current Conditions VDD = 5V, VIN = VDD or VSS VDD = 10V, VIN = VDD or VSS VDD = 15V, VIN = VDD or VSS VOL LOW Level Output Voltage |IO| < 1 A VDD = 5V VDD = 10V VDD = 15V VOH HIGH Level Output Voltage |IO| < 1 A VDD = 5V VDD = 10V VDD = 15V VIL LOW Level Input Voltage VIH HIGH Level Input Voltage IOL LOW Level Output Current (Note 7) IOH HIGH Level Output Current (Note 7) IIN Input Current VDD = 5V, VO = 0.5V or 4.5V VDD = 10V, VO = 1V or 9V VDD = 15V, VO = 1.5V or 13.5V VDD = 5V, VO = 0.5V or 4.5V VDD = 10V, VO = 1V or 9V VDD = 15V, VO = 1.5V or 13.5V VDD = 5V, VO = 0.4V VDD = 10V, VO = 0.5V VDD = 15V, VO = 1.5V VDD = 5V, VO = 4.6V VDD = 10V, VO = 9.5V VDD = 15V, VO = 13.5V VDD = 15V, VIN = 0V VDD = 15V, VIN = 15V
Note 6: VSS = 0V unless otherwise specified. Note 7: IOH and IOL are tested one output at a time.
-55C Min Max 1 2 4 0.05 0.05 0.05 4.95 9.95 14.95 1.5 3.0 4.0 3.5 7.0 11.0 0.64 1.6 4.2 -0.64 -1.6 -4.2 -0.1 0.1 3.5 7.0 11.0 0.51 1.3 3.4 -0.51 -1.3 -3.4 4.95 9.95 14.95 Min
+25C Typ Max 1 2 4 0 0 0 5 10 15 1.5 3.0 4.0 0.05 0.05 0.05
+125C Min Max 30 60 120 0.05 0.05 0.05 4.95 9.95 14.95 1.5 3.0 4.0 3.5 7.0 11.0
Units
A
V
V
V
V
0.88 2.25 8.8 -0.88 -2.25 -8.8 -10-5 10-5 -0.1 0.1
0.36 0.9 2.4 -0.36 -0.9 -2.4 -1.0 1.0 A mA mA
3
www.fairchildsemi.com
CD4027BC
AC Electrical Characteristics
Symbol tPHL or tPLH Parameter Propagation Delay Time from Clock to Q or Q tPHL or tPLH Propagation Delay Time from Set to Q or Reset to Q tPHL or tPLH Propagation Delay Time from Set to Q or Reset to Q tS Minimum Data Setup Time
(Note 8)
Conditions VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V Min Typ 200 80 65 170 70 55 110 50 40 135 55 45 100 50 40 2.5 6.2 7.6 15 10 5 100 40 32 80 30 25 5 35 200 80 65 160 60 50 7.5 pF pF ns ns s 5 12.5 15.5 MHz Max 400 160 130 340 140 110 220 100 80 270 110 90 200 100 80 ns ns ns ns ns Units
TA = 25C, CL = 50 pF, trCL = tfCL = 20 ns, unless otherwise specified
tTHL or tTLH
Transition Time
VDD = 5V VDD = 10V VDD = 15V
fCL
Maximum Clock Frequency (Toggle Mode)
VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V Any Input Per Flip-Flop (Note 9)
trCL or tfCL
Maximum Clock Rise and Fall Time
tW
Minimum Clock Pulse Width (tWH = tWL)
tWH
Minimum Set and Reset Pulse Width
CIN CPD
Average Input Capacitance Power Dissipation Capacity
Note 8: AC Parameters are guaranteed by DC correlated testing. Note 9: CPD determines the no load AC power consumption of any CMOS device. For complete explanation, see 74C Family Characteristics application note, AN-90.
Typical Applications
Ripple Binary Counters
Shift Registers
www.fairchildsemi.com
4
CD4027BC
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A
5
www.fairchildsemi.com
CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com


▲Up To Search▲   

 
Price & Availability of CD4027BC

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X