View STP6NK70Z_354444.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STP6NK70Z STF6NK70Z
N-CHANNEL 700V - 1.5 - 5A TO-220/TO-220FP Zener-Protected SuperMESHTMMOSFET
Table 1: General Features
TYPE STP6NK70Z STF6NK70Z
s s s s s s s
Figure 1: Package
ID 5A 5 A (*) Pw 110 W 30 W
VDSS 700 V 700 V
RDS(on) < 1.8 < 1.8
TYPICAL RDS(on) = 1.5 EXTREMELY HIGH dv/dt CAPABILITY IMPROVED ESD CAPABILITY 100% AVALANCHE RATED GATE CHARGE MINIMIZED VERY LOW INTRINSIC CAPACITANCES VERY GOOD MANUFACTURING REPEATIBILITY
3 1 2
1 2
3
TO-220
TO-220FP
DESCRIPTION The SuperMESHTM series is obtained through an extreme optimization of ST's well established stripbased PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmeshTM products.
Figure 2: Internal Schematic Diagram
APPLICATIONS s HIGH CURRENT, HIGH SPEED SWITCHING s IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTORS AND PFC
Table 2: Order Codes
SALES TYPE STP6NK70Z STF6NK70Z MARKING P6NK70Z F6NK70Z PACKAGE TO-220 TO-220FP PACKAGING TUBE TUBE
Rev. 3 September 2005 1/12
STP6NK70Z - STF6NK70Z
Table 3: Absolute Maximum ratings
Symbol VDS VDGR VGS ID ID IDM ( ) PTOT VESD(G-S) dv/dt (1) VISO Tj Tstg Parameter
STP6NK70Z
Value
STF6NK70Z
Unit V V V 5 (*) 3.15 (*) 20 (*) 30 0.24 A A A W W/C V V/ns 2500 V C C
Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuous) at TC = 25C Drain Current (continuous) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Derating Factor Gate source ESD(HBM-C=100pF, R=1.5K) Peak Diode Recovery voltage slope Insulation Withstand Voltage (DC) Operating Junction Temperature Storage Temperature 5 3.15 20 110 0.87
700 700 30
4000 4.5
-55 to 150 -55 to 150
( ) Pulse width limited by safe operating area (1) ISD 5A, di/dt 100A/s, VDD V(BR)DSS, Tj TJMAX. (*) Limited only by maximum temperature allowed
Table 4: Thermal Data
TO-220 Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 1.14 62.5 300 TO-220FP 4.2 C/W C/W C
Table 5: Avalanche Characteristics
Symbol IAR EAS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Single Pulse Avalanche Energy (starting Tj = 25 C, ID = IAR, VDD = 50 V) Max Value 5 200 Unit A mJ
Table 6: Gate-Source Zener Diode
Symbol BVGSO Parameter Gate-Source Breakdown Voltage Test Conditions Igs= 1mA (Open Drain) Min. 30 Typ. Max. Unit V
PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components.
2/12
STP6NK70Z - STF6NK70Z
ELECTRICAL CHARACTERISTICS (TCASE =25C UNLESS OTHERWISE SPECIFIED) Table 7: On /Off
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance Test Conditions ID = 1 mA, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125C VGS = 20 V VDS = VGS, ID = 100 A VGS = 10 V, ID = 2.5 A 3 3.75 1.5 Min. 700 1 50 10 4.5 1.8 Typ. Max. Unit V A A A V
Table 8: Dynamic
Symbol gfs (1) Ciss Coss Crss COSS eq (3). td(on) tr td(off) tf Qg Qgs Qgd Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Equivalent Output Capacitance Turn-on Delay Time Rise Time Turn-off-Delay Time Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDS = 25 V, f = 1 MHz, VGS = 0 Min. Typ. 4.4 930 105 22 70 17 18 45 30 34 6.5 17 47 Max. Unit S pF pF pF pF ns ns ns ns nC nC nC Forward Transconductance VDS = 15 V , ID = 2.5 A
VGS = 0 V, VDS = 0 to 560 V VDD = 350 V, ID = 2.5 A, RG = 4.7 , VGS = 10 V (see Figure 17) VDD = 560 V, ID = 5 A, VGS = 10 V (see Figure 20)
Table 9: Source Drain Diode
Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 5 A, VGS = 0 ISD = 5 A, di/dt = 100 A/s VDD = 35V (see Figure 18) ISD = 5 A, di/dt = 100 A/s VDD = 35V, Tj = 150C (see Figure 18) 432 2.37 11 588 3.38 11.5 Test Conditions Min. Typ. Max. 5 20 1.6 Unit A A V ns C A ns C A
(1) Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. (2) Pulse width limited by safe operating area. (3) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS.
3/12
STP6NK70Z - STF6NK70Z
Figure 3: Safe Operating Area Figure 6: Thermal Impedance
Figure 4: Safe Operating Area for TO-220FP
Figure 7: Thermal Impedance for TO-220FP
Figure 5: Output Characteristics
Figure 8: Transfer Characteristics
4/12
STP6NK70Z - STF6NK70Z
Figure 9: Transconductance Figure 12: Static Drain-source On Resistance
Figure 10: Gate Charge vs Gate-source Voltage
Figure 13: Capacitance Variations
Figure 11: Source-Drain Diode Forward Characteristics
Figure 14: Normalizzed BVdss vs Temperature
5/12
STP6NK70Z - STF6NK70Z
Figure 15: Avalanche Energy vs Starting Tj
6/12
STP6NK70Z - STF6NK70Z
Figure 16: Unclamped Inductive Load Test Circuit Figure 19: Unclamped Inductive Wafeform
Figure 17: Switching Times Test Circuit For Resistive Load
Figure 20: Gate Charge Test Circuit
Figure 18: Test Circuit For Inductive Load Switching and Diode Recovery Times
7/12
STP6NK70Z - STF6NK70Z
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
8/12
STP6NK70Z - STF6NK70Z
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1
D
F
G1 H
F2
L2 L5
E
123
L4
G
9/12
STP6NK70Z - STF6NK70Z
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
10/12
STP6NK70Z - STF6NK70Z
Table 10: Revision History
Date 24-Sep-2004 04-Nov-2004 06-Sep-2005 Revision 1 2 3 Description of Changes First release. Complete version Inserted Ecopack indication
11/12
STP6NK70Z - STF6NK70Z
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners (c) 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
12/12

▲Up To Search▲

Price & Availability of STP6NK70Z

	To Download STP6NK70Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .