 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Corporate: www.cdtechno.com Product: www.cdpowerelectronics.com IHB60S 60 Watt Single Output Half Brick DC/DC Converter 18 - 40 & 33 - 75V Input Range High Efficiency: 84% Typical 1500VDC Isolation Between Input and Output Operation to 100C Baseplate Temperature 50S Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off Adjustable Output Voltage IHB60S Series Approved to UL/CUL 1950, EN60950 The IHB60S series standard half brick modules are designed for today's demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltage and no need for minimum loading. PRODUCT SELECTION CHART MODEL IHB60S2403 IHB60S2405 IHB60S4803 IHB60S4805 INPUT VOLTAGE (VDC) 24 24 48 48 (18-40) (18-40) (33-75) (33-75) RATED VOUT (VDC) 3.3 5.1 3.3 5.1 RATED MAXIMUM IOUT (A) 18 12 18 12 ABSOLUTE MAX. RATINGS Output Short-Circuit Duration Baseplate Temperature Continuous +100C EFFICIENCY vs TEMPERATURE TCASE = +40C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified. Change in Efficiency (%) Lead Temperature (soldering, 10 seconds max) +300C Storage Temperature Input to Output Isolation +125C 1500 VDC Case Temperature (C) SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40C nominal input voltage unless otherwise specified. PARAMETER Voltage Range IHB60S24X Series IHB60S48X Series Reflected Ripple Current Input Ripple Rejection Maximum Input Current IHB60S24X Series IHB60S48X Series No Load Power Dissipation Inrush Charge IHB60S24X Series IHB60S48X Series Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled CONDITIONS MIN 18 33 TYP 24 48 60 MAX 40 75 220 UNITS VDC VDC mA dB A A W mC mC mA mA INPUT Peak - Peak DC to 1KHz Output Power = 60W VIN = 16V VIN = 30V POUT = 0, VIN, Min 6 3 6 0.29 0.165 7.5 15 10 25 PARAMETER ISOLATION Input to Output Input to Baseplate Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance CONDITIONS Peak Test MIN 1500 1500 10 TYP MAX UNITS VDC VDC M pF A, rms VISO = 240VAC, 60Hz VIN = Nominal, IO=INom Within 1% of Nominal VOUT Open Collector/Drain VIN = VMAX 2000 180 1 5 3.5 % mSec GENERAL 7 0.8 Open Collector 100 0.4 Open Collector 440 150 4 0 470 470 480 520 320 47 5 1 490 3 (85) +100 +125 +115 8.2 mA V Open Collector/Drain A V KHz nSec V V KHz oz (g) C C C C/W Case Temperature -40 -55 +100 Case to Ambient Product: www.cdpowerelectronics.com IHB60S REV A 10/01 2 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40C nominal input voltage unless otherwise specified. PARAMETER CONDITIONS 60 Watts Max IO Nom 0 DC to 20MHz* VOUT Min Nom 30 3.3 9.0 100 .02 Max 60 18.0 200 3.80 .05 UNITS W V A mV V %/C IHB60SX03** OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation * VIN, MinVINVIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step VOUT, 1% of VOUT, Nom VIN=NOM, IO=18A 3.15 Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency 0.05 0.50 23 19 150 35 4.2 83 84 0.10 1.00 25 250 50 5.0 % % A A mV Sec V % PARAMETER CONDITIONS 60 Watts Max IO Nom VOUT Min Nom 30 5.1 6.0 100 .02 Max 60 12 200 5.50 .05 UNITS W V A mV V %/C IHB60SX05** OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation 0 DC to 20MHz* * VIN, MinVINVIN, Max IO = IO, Nom Min Load to Rated Load 4.60 Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency 0.05 0.50 16.0 12.6 200 35 6.0 86 87 0.10 1.0 16.0 300 50 6.8 % % A A mV Sec V % 50 to 100% Load Step VOUT, 1% of VOUT, Nom VIN=NOM, IO=12A * See Application Notes available on the web at www.cdpowerelectronics.com ** X = Either 24 or 48 Product: www.cdpowerelectronics.com IHB60S REV A 10/01 3 MECHANICAL PIN SIDE DOWN SIDE VIEW PIN CONNECTIONS 1 2 3 4 5 6 7 8 PRIMARY ON/OFF -VIN +VIN SYNC IN TRIM -VOUT +VOUT SECONDARY ON/OFF PIN SIDE UP NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: 0.005" MECHANICAL TOLERANCE: 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. C&D Technologies (Power Electronics) Ltd. Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.770.9369 C&D Technologies, (NCL) Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user's intended purpose and in user's specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. |
Price & Availability of IHB60S4803
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |